Kenmore Elite 79575194400 refrigerator Parts

Kenmore Elite refrigerator model 79575194400 is a bottom-mount (bottom freezer) refrigerator. For exact exterior dimensions and capacity for your specific unit, we recommend using the specifications section in the Owner's manual, since size can vary across closely related 795.7519xxxx models.

What “size” usually means (and what to check)

When customers ask for refrigerator size, they typically mean one or more of these:

• Overall exterior dimensions (width, depth, height)
• Total capacity (cubic feet)
• Cutout/clearance needs (space for doors to swing, airflow behind the cabinet)
• Door and drawer clearance (space needed to fully open the refrigerator and freezer)

Typical size range for this Kenmore 795 bottom-mount style

Most Kenmore 795-series bottom-mount refrigerators are in this general range:

Measurement	Typical range (approx.)	Why you care
Width	33 in	Fit between cabinets
Height	67 to 70 in	Overhead cabinet clearance
Depth	30 to 34 in	Counter projection and walkway space

How we recommend measuring your refrigerator

Use a tape measure and record these three numbers:

• Width: widest point of the cabinet (include hinges if they stick out)
• Height: floor to top of hinge cover (or highest point)
• Depth: back to front of doors/handles (measure both with and without handles if needed)

Clearance tips that prevent fit problems

• Leave space behind the unit for air circulation.
• Confirm you have room to remove drawers and shelves during service.
• If doors are being removed for moving, follow the steps in the Installation guide.

Why it matters

Getting the correct size prevents delivery and installation issues, helps maintain proper airflow for cooling performance, and avoids door-swing problems that can lead to gasket leaks and temperature swings.

Last updated: February 2026

The exact cubic-foot capacity for the Kenmore Elite refrigerator model 79575194400 is listed in the specifications section of the owner's manual. Use that value when comparing storage size, because “795” model numbers cover multiple configurations and capacities.

Where to find the capacity for model 79575194400

Check these spots in the owner's manual for the most accurate number:

• Specifications or product dimensions/capacity section
• Parts and features pages (sometimes list total capacity)
• The model/serial label section (may reference capacity or series)
• Any energy or performance information pages

Quick capacity guidance (typical ranges)

If you are estimating before you look it up, most bottom-mount refrigerators in this style commonly fall into these ranges:

• Standard capacity: ~20 to 24 cu. ft.
• Large capacity: ~24 to 30 cu. ft.
• Extra-large models: ~30 cu. ft. and up

Why the exact number matters

Capacity affects more than storage space; it also impacts how you plan kitchen fit and performance expectations.

• Helps you compare like-for-like when shopping or planning a replacement
• Affects shelf/bin layout and usable space (not just total volume)
• Helps set realistic expectations for ice storage and freezer organization

Capacity vs. what you actually use

What you’re measuring	What it means	Why it can differ
Total capacity (cu. ft.)	Combined refrigerator + freezer volume	Includes areas you may not use fully
Usable space	Space you can practically load with food	Reduced by shelves, bins, icemaker, air channels

Last updated: February 2026

A Kenmore Elite 79575194400 bottom-mount refrigerator typically lasts 12 to 15 years. Keeping condenser coils clean, maintaining good airflow, and fixing door-seal or cooling issues quickly helps the sealed system (compressor and refrigerant tubing) run less and last longer; see the owner's manual.

Typical lifespan and what affects it

Most refrigerators in this class reach the 12 to 15 year range when they have stable temperatures and good ventilation.

• Clean condenser coils regularly to reduce compressor run time
• Keep door gaskets clean and sealing tightly
• Avoid overpacking; allow air to circulate around vents
• Set realistic temperatures (about 37°F fresh food, 0°F freezer)
• Address frost buildup, warm temps, or unusual noises early

Maintenance checklist (high impact)

Use this quick checklist to get the most life out of your Kenmore Elite refrigerator.

Task	How often	Why it matters
Clean condenser coils	Every 6 to 12 months	Lowers heat load and compressor wear
Inspect/clean door gaskets	Every 3 months	Prevents warm air leaks and frost
Verify temps with a thermometer	Monthly	Catches cooling drift early
Confirm proper air circulation/clearances	At install and after moves	Prevents overheating and poor cooling

When a “short lifespan” is really a repairable issue

These symptoms often point to a specific part or airflow problem, not end-of-life.

• Fridge warm but freezer cold: airflow/evaporator frost issue (defrost system)
• Frost or ice buildup: defrost sensor or door seal problems
• Water dispenser/ice maker issues: water supply, tubing, or inlet valve
• Lights not working when door opens: door switch issue

If you are troubleshooting cooling or frost problems, the refrigerator defrost sensor assembly 6615JB2005H is one of the components commonly involved in the defrost circuit on this model.

Why it matters

A refrigerator that runs hotter, leaks air, or has restricted airflow forces the compressor to run longer. That extra run time is the biggest driver of wear on the sealed refrigeration system.

Last updated: February 2026

If your Kenmore Elite refrigerator model 79575194400 has a bad compressor, you typically see poor cooling (especially in the freezer), unusually long run times, and abnormal compressor noises or overheating. Confirm the basics first (power, airflow, settings) before treating the sealed system as the cause.

Quick checks before blaming the compressor

We recommend ruling out common issues that mimic compressor failure:

• Make sure the temperature controls are set correctly; wait 24 hours after any adjustment for temperatures to stabilize (the compressor runs longer at colder settings). See the 79575194400 owner's manual.
• Check that doors close and seal fully; warm air leaks can cause long run times and weak freezing.
• Verify condenser airflow: clean dust from the condenser area and confirm the condenser fan is running.
• Listen for normal operating sounds (clicks, gurgling, fan noise); many are expected during cooling and defrost cycles.
• Check for a tripped breaker or blown fuse if the refrigerator is completely dead.

Signs that point more strongly to a compressor problem

A compressor issue is more likely when multiple symptoms happen together:

• Freezer and fresh food sections both warm, even though fans run and vents are not blocked
• Compressor is very hot and repeatedly clicks on and off (start attempt then shutdown)
• Refrigerator runs almost constantly but temperatures do not recover
• You hear loud buzzing, grinding, or repeated hard-start sounds from the compressor area

What to do next (safe, practical steps)

1. Unplug the refrigerator for 5 minutes, then plug it back in and listen for a normal start.
2. Clean condenser coils and confirm the condenser fan runs when the compressor is running.
3. If the unit still will not cool, have a technician test the sealed system and compressor.

Parts that may be involved

If testing confirms a compressor or sealed-system issue, these model-specific parts are commonly associated with that repair:

Part	What it relates to	When it matters
Refrigerator compressor TCA35931726	Primary cooling pump	No/low cooling, hard starting, overheating
Refrigerator drier assembly ADH73150208	Sealed-system moisture control	Often replaced during sealed-system service

Why it matters

The compressor is part of the sealed refrigeration system; misdiagnosing it can lead to unnecessary cost. Checking settings, airflow, and normal operating sounds first helps you pinpoint whether the problem is truly sealed-system related.

Last updated: February 2026

Common problems on the Kenmore Elite 79575194400 bottom-mount refrigerator are warm temperatures (often tied to airflow or defrost issues), frost buildup on the evaporator area, unusual fan noise, and water leaks. Many of these symptoms trace back to maintenance items like condenser coils, door sealing, and the defrost system in the owner's manual.

Most common symptoms and what they usually mean

• Not cooling or weak cooling: restricted airflow, dirty condenser coils, evaporator fan issue, or sealed-system/compressor trouble
• Frost buildup in freezer or on back panel: defrost sensor/heater/control problem, or doors not sealing well
• Loud humming, buzzing, or rattling: condenser fan area, evaporator fan area, or compressor mounting vibration
• Water under the refrigerator: clogged/iced defrost drain, water line connection leak, or valve seepage
• Ice maker or dispenser issues: low water pressure, frozen water line, or inlet valve problem

Quick checks we recommend before replacing parts

1. Confirm airflow: do not block vents; allow space around food packages.
2. Clean condenser coils: dusty coils commonly cause poor cooling and longer run times.
3. Inspect door sealing: look for gaps, torn gasket areas, or doors that do not close smoothly.
4. Listen for fans: a squeal or grinding can point to a fan blade rubbing or ice buildup.
5. Check for error codes (if your display shows one): use Kenmore 795 model bottom freezer refrigerator error codes to match the code to a likely failure area.

Parts that commonly relate to these symptoms (when diagnosis points there)

Symptom	Common area	Example part on this model page
Frost buildup, warm fridge	Defrost system	Refrigerator defrost sensor assembly 6615JB2005H
Water dispenser slow or no water	Water supply/valve	Refrigerator water inlet valve 5221JB2006K
Door not sealing, frost, sweating	Door seal	Refrigerator gasket assembly MDS64172919
Light or door alarm issues	Door switch	Refrigerator door push-button switch 6600JB1010A

Why it matters

Cooling and frost complaints are often caused by airflow restrictions or defrost problems. Fixing the root cause protects food temperatures, reduces compressor run time, and helps prevent repeat icing and leaks.

Last updated: February 2026