Kenmore Elite 79575194400 refrigerator Parts

Kenmore Elite refrigerator model 79575194400 is a bottom-mount (bottom freezer) refrigerator. For exact exterior dimensions and capacity for your specific unit, we recommend using the specifications section in the Owner's manual, since size can vary across closely related 795.7519xxxx models.

When customers ask for refrigerator size, they typically mean one or more of these:

• Overall exterior dimensions (width, depth, height)
• Total capacity (cubic feet)
• Cutout/clearance needs (space for doors to swing, airflow behind the cabinet)
• Door and drawer clearance (space needed to fully open the refrigerator and freezer)

Most Kenmore 795-series bottom-mount refrigerators are in this general range:

Use a tape measure and record these three numbers:

• Width: widest point of the cabinet (include hinges if they stick out)
• Height: floor to top of hinge cover (or highest point)
• Depth: back to front of doors/handles (measure both with and without handles if needed)

• Leave space behind the unit for air circulation.
• Confirm you have room to remove drawers and shelves during service.
• If doors are being removed for moving, follow the steps in the Installation guide.

Getting the correct size prevents delivery and installation issues, helps maintain proper airflow for cooling performance, and avoids door-swing problems that can lead to gasket leaks and temperature swings.

Last updated: February 2026

The exact cubic-foot capacity for the Kenmore Elite refrigerator model 79575194400 is listed in the specifications section of the owner's manual. Use that value when comparing storage size, because “795” model numbers cover multiple configurations and capacities.

Check these spots in the owner's manual for the most accurate number:

• Specifications or product dimensions/capacity section
• Parts and features pages (sometimes list total capacity)
• The model/serial label section (may reference capacity or series)
• Any energy or performance information pages

If you are estimating before you look it up, most bottom-mount refrigerators in this style commonly fall into these ranges:

• Standard capacity: ~20 to 24 cu. ft.
• Large capacity: ~24 to 30 cu. ft.
• Extra-large models: ~30 cu. ft. and up

Capacity affects more than storage space; it also impacts how you plan kitchen fit and performance expectations.

• Helps you compare like-for-like when shopping or planning a replacement
• Affects shelf/bin layout and usable space (not just total volume)
• Helps set realistic expectations for ice storage and freezer organization

Last updated: February 2026

A Kenmore Elite 79575194400 bottom-mount refrigerator typically lasts 12 to 15 years. Keeping condenser coils clean, maintaining good airflow, and fixing door-seal or cooling issues quickly helps the sealed system (compressor and refrigerant tubing) run less and last longer; see the owner's manual.

Most refrigerators in this class reach the 12 to 15 year range when they have stable temperatures and good ventilation.

• Clean condenser coils regularly to reduce compressor run time
• Keep door gaskets clean and sealing tightly
• Avoid overpacking; allow air to circulate around vents
• Set realistic temperatures (about 37°F fresh food, 0°F freezer)
• Address frost buildup, warm temps, or unusual noises early

Use this quick checklist to get the most life out of your Kenmore Elite refrigerator.

These symptoms often point to a specific part or airflow problem, not end-of-life.

• Fridge warm but freezer cold: airflow/evaporator frost issue (defrost system)
• Frost or ice buildup: defrost sensor or door seal problems
• Water dispenser/ice maker issues: water supply, tubing, or inlet valve
• Lights not working when door opens: door switch issue

If you are troubleshooting cooling or frost problems, the refrigerator defrost sensor assembly 6615JB2005H is one of the components commonly involved in the defrost circuit on this model.

A refrigerator that runs hotter, leaks air, or has restricted airflow forces the compressor to run longer. That extra run time is the biggest driver of wear on the sealed refrigeration system.

Last updated: February 2026

If your Kenmore Elite refrigerator model 79575194400 has a bad compressor, you typically see poor cooling (especially in the freezer), unusually long run times, and abnormal compressor noises or overheating. Confirm the basics first (power, airflow, settings) before treating the sealed system as the cause.

We recommend ruling out common issues that mimic compressor failure:

• Make sure the temperature controls are set correctly; wait 24 hours after any adjustment for temperatures to stabilize (the compressor runs longer at colder settings). See the 79575194400 owner's manual.
• Check that doors close and seal fully; warm air leaks can cause long run times and weak freezing.
• Verify condenser airflow: clean dust from the condenser area and confirm the condenser fan is running.
• Listen for normal operating sounds (clicks, gurgling, fan noise); many are expected during cooling and defrost cycles.
• Check for a tripped breaker or blown fuse if the refrigerator is completely dead.

A compressor issue is more likely when multiple symptoms happen together:

• Freezer and fresh food sections both warm, even though fans run and vents are not blocked
• Compressor is very hot and repeatedly clicks on and off (start attempt then shutdown)
• Refrigerator runs almost constantly but temperatures do not recover
• You hear loud buzzing, grinding, or repeated hard-start sounds from the compressor area

1. Unplug the refrigerator for 5 minutes, then plug it back in and listen for a normal start.
2. Clean condenser coils and confirm the condenser fan runs when the compressor is running.
3. If the unit still will not cool, have a technician test the sealed system and compressor.

If testing confirms a compressor or sealed-system issue, these model-specific parts are commonly associated with that repair:

The compressor is part of the sealed refrigeration system; misdiagnosing it can lead to unnecessary cost. Checking settings, airflow, and normal operating sounds first helps you pinpoint whether the problem is truly sealed-system related.

Last updated: February 2026

Common problems on the Kenmore Elite 79575194400 bottom-mount refrigerator are warm temperatures (often tied to airflow or defrost issues), frost buildup on the evaporator area, unusual fan noise, and water leaks. Many of these symptoms trace back to maintenance items like condenser coils, door sealing, and the defrost system in the owner's manual.

• Not cooling or weak cooling: restricted airflow, dirty condenser coils, evaporator fan issue, or sealed-system/compressor trouble
• Frost buildup in freezer or on back panel: defrost sensor/heater/control problem, or doors not sealing well
• Loud humming, buzzing, or rattling: condenser fan area, evaporator fan area, or compressor mounting vibration
• Water under the refrigerator: clogged/iced defrost drain, water line connection leak, or valve seepage
• Ice maker or dispenser issues: low water pressure, frozen water line, or inlet valve problem

1. Confirm airflow: do not block vents; allow space around food packages.
2. Clean condenser coils: dusty coils commonly cause poor cooling and longer run times.
3. Inspect door sealing: look for gaps, torn gasket areas, or doors that do not close smoothly.
4. Listen for fans: a squeal or grinding can point to a fan blade rubbing or ice buildup.
5. Check for error codes (if your display shows one): use Kenmore 795 model bottom freezer refrigerator error codes to match the code to a likely failure area.

Cooling and frost complaints are often caused by airflow restrictions or defrost problems. Fixing the root cause protects food temperatures, reduces compressor run time, and helps prevent repeat icing and leaks.

Last updated: February 2026