Kenmore 79570323311 refrigerator Parts

Your Kenmore refrigerator’s model number is printed on the identification label inside the fresh food (refrigerator) compartment. For Kenmore model 79570323311, the 79570323311 owner's manual confirms the label is on the interior liner; write down the model and serial number before ordering parts or scheduling service.

Check these common label locations first:

• Inside the refrigerator compartment on the interior side wall (liner)
• Near the top side walls behind the shelves
• On the side wall behind or near the crisper drawers
• Along the door frame area (open the door and look around the perimeter)
• In the freezer compartment on an interior wall (less common on this style)

Most Kenmore ID labels include the same key fields.

Kenmore model families can look nearly identical, but parts like a water filter, ice maker, door gasket, or control board can vary by model and serial range. Using the exact model number helps us match the correct diagrams and compatible parts the first time.

Once you have the model number, compare the part description and identifiers when you shop. For example, if you are replacing the filter on this model, match it to the correct listing such as the genuine Kenmore refrigerator water filter 9690 AGF80300801.

Last updated: February 2026

For Kenmore model 79570323311, the most reliable way to get cubic feet is to look up the capacity in the specifications section of the 79570323311 owner's manual. If you cannot find it there, you can calculate capacity by measuring the interior and converting cubic inches to cubic feet.

• Check the specifications section in the 79570323311 owner's manual.
• Look for the model/serial label inside the fresh food compartment (the manual notes it is on the interior liner); use that exact model number when searching specs.
• If you have a water filter and ice maker, remember those components reduce usable storage space even though they do not change the published cubic feet.
• If you are comparing similar Kenmore 795 models, use capacity as a guide, but match by exact model number for accuracy.

1. Empty the compartment you want to measure (refrigerator section and freezer section can be calculated separately).
2. Measure interior height, width, and depth in inches (do not include door bins if you want “shelf box” space).
3. Multiply: H x W x D = cubic inches.
4. Divide by 1728 to convert to cubic feet.

Cubic feet helps you compare refrigerators fairly, plan food storage, and choose correctly sized parts and accessories (for example, organizing bins and filter systems) for your Kenmore bottom-mount refrigerator.

Last updated: February 2026

Common problems we see on Kenmore Elite refrigerators like model 79570323311 include cooling that runs too warm (often tied to door sealing, heavy use, or airflow issues), ice maker and dispenser performance problems, and control or compressor-related failures. Use the 79570323311 owner's manual troubleshooting section to match symptoms to the most likely cause.

• Refrigerator or freezer too warm: doors opened often, doors not closing correctly, controls set incorrectly, or the unit is in a hot location (the manual notes it should not be operated above 110°F).
• Ice maker not making ice or making small cubes: restricted water supply, filter overdue, or inlet valve issues.
• Water tastes bad or dispenser flow is weak: filter exhausted or air in the line after service.
• Noises (clicking, whooshing, gurgling, sizzling): many are normal defrost and airflow sounds.
• Doors hard to open or won’t close: dirty or sticky gaskets, leveling and alignment problems.

• Confirm temperature settings; adjust one increment at a time and allow time to stabilize.
• Check door closure and gasket contact; clean sticky gaskets and the surfaces they touch.
• Reduce long door openings and let hot food cool before loading.
• If water or ice is affected, verify the refrigerator is connected to a cold water supply.
• After filter changes or long non-use, flush the dispenser (the manual describes dispensing about 2.5 gallons in short on/off cycles).

Catching simple causes (door sealing, settings, airflow, filter maintenance) prevents temperature swings, food spoilage, and unnecessary part replacement. It also helps you separate normal operating noises from true failures.

Last updated: February 2026

Most Kenmore refrigerators average about 10 to 15 years of service life with normal use and basic maintenance. For your Kenmore 79570323311 bottom-mount refrigerator, keeping airflow clear, seals tight, and temperatures stable is what most directly helps it reach the high end of that range; see the 79570323311 owner's manual for model-specific care and operating guidance.

A refrigerator’s lifespan depends more on operating conditions and maintenance than on any single part.

• Condenser cleanliness (dust buildup makes the compressor run hotter and longer)
• Door gasket condition (air leaks cause longer run times and temperature swings)
• Ice maker and water system health (leaks and clogs create secondary damage)
• Room temperature and ventilation (tight cabinets and hot garages shorten life)
• How often doors are opened and how full the compartments are

• Set temps to typical targets: 37°F fresh food, 0°F freezer.
• Clean the condenser area regularly (frequency depends on pets and dust).
• Keep door gaskets clean; wipe with mild soap and water, then dry.
• Replace the water filter on schedule to protect the dispenser and ice maker.
• Make sure the refrigerator is level so doors close fully.

When these fail, repair cost and age often determine whether you fix or replace.

A refrigerator that is running longer than normal can still be “working,” but it is typically using more energy and putting extra wear on the sealed system. The manual also notes that high-efficiency compressors can run longer and make different sounds than older units, which helps you separate normal operation from a true failure.

Last updated: February 2026

Kenmore is a brand name, so replacement parts for Kenmore refrigerator model 79570323311 are commonly manufactured by the same major suppliers that build components for many refrigerators. The most reliable way to confirm the correct maker is to match the exact part number and part ID listed for your model in the 79570323311 owner’s manual and parts list.

Kenmore parts are sourced from multiple manufacturers, so the “maker” can vary by component (water filter, ice maker, control board, gasket). What matters is that the part is the correct match for 79570323311.

• Match by model number: 79570323311
• Match by part ID (Sears PartsDirect identifier)
• Match by manufacturer part number
• Compare the part name and location (door, freezer, dispenser)
• Use the manual diagrams to avoid ordering a similar looking part

These are examples of parts listed for Kenmore 79570323311; the brand on the box may differ, but the identifiers must match.

1. Find the part in the exploded view or parts list for 79570323311.
2. Verify the part ID and part number match exactly.
3. If you are replacing a water filter, confirm the filter part number (this model uses ADQ36006102 for the filter element).

Your manual lists water supply parameters and calls out the filter element part number ADQ36006102; using the correct filter helps maintain proper flow and filtration performance.

Kenmore-branded appliances often share components across multiple production lines. Ordering by “Kenmore refrigerator part” alone can lead to the wrong fit; ordering by model number + part ID/part number gets the correct component the first time.

Last updated: February 2026

Water leaking from the bottom of your Kenmore 79570323311 refrigerator is typically caused by a clogged or frozen defrost drain overflowing during defrost, or a slow leak at the water supply tubing, fittings, or inlet valve. Use the 79570323311 owner's manual to locate access points and water-line connection details.

• Look for ice or slush on the freezer floor; this points to a frozen defrost drain.
• Check whether the puddle appears after door openings or after a defrost cycle.
• Inspect the drain pan underneath for overflow or cracks.
• Pull the refrigerator out and look for drips at the water line connections.
• If you have an ice maker, check the fill tube and tubing routing for rubbing or kinks.

1. Unplug the refrigerator.
2. Remove freezer bins/drawer to reach the drain area.
3. Melt ice with warm water.
4. Flush the drain until water runs freely to the pan.
5. Clean the drain tube end; if it is split or deformed, replace it.

If the drain tube is damaged or keeps clogging, replacing the refrigerator drain tube 5251JA3003D is a common repair.

• Check the compression nut and ferrule at the refrigerator connection.
• Confirm the shutoff valve connection is dry.
• Route tubing so it does not vibrate against the wall.

A slow seep can also come from the lg refrigerator water inlet valve AJU72992601.

Bottom leaks can create freezer ice buildup, cause recurring puddles, and lead to poor cooling if airflow gets blocked.

Last updated: February 2026