Kenmore Elite 10657703704 side-by-side refrigerator Parts

Yes; the Kenmore Elite refrigerator model 10657703704 has a RESET button for the water filter status light, but it does not use a single universal “reset button” for the entire refrigerator. For control lock and alarms, you use the specific control panel buttons shown in the 10657703704 owner's manual.

What the RESET button does on this model

On model 10657703704, the RESET button is used to reset the water filter indicator after you replace the filter.

• Replace the water filter about every 6 months (sooner if water flow drops)
• Press and hold RESET for 3 seconds to reset the filter status light
• The status typically changes back to Good (green) after the reset
• Keep and reuse the filter cap when installing the new filter

If you are replacing the filter, use the correct cartridge for this model, such as the genuine Kenmore refrigerator water filter EDR3RXD1.

How to “reset” common refrigerator issues (no single reset button)

If the refrigerator is acting up (no ice, warm temps, odd beeping), a basic power reset often clears a temporary control glitch.

• Unplug the refrigerator (or turn off the breaker)
• Wait 5 minutes
• Restore power and allow 24 hours for temperatures to stabilize
• Confirm the doors are fully closed and gaskets seal
• Check that the control panel is not in a locked mode (see manual for your button sequence)

Quick comparison: reset types

What you want to reset	What to use on 10657703704	Typical result
Water filter light	Hold RESET 3 seconds	Filter status returns to “Good”
Door alarm	DOOR AJAR button	Silences or toggles alarm feature
Control panel lock	Control lock feature (varies by panel)	Buttons beep but settings do not change
General glitch	Power reset (unplug 5 minutes)	Restores normal operation if no failed part

Why it matters

Using the correct reset prevents unnecessary part replacement. For example, resetting the filter light after installing a new cartridge helps you track filter life accurately, while a power reset helps rule out a temporary electronic control issue.

Last updated: February 2026

You typically cannot determine the exact cubic feet of a Kenmore refrigerator from the model number alone. For Kenmore Elite model 10657703704, the most reliable way is to check the capacity listing in the 10657703704 owner's manual or on the refrigerator’s rating label inside the fresh food section.

Fast ways to find the cubic feet (most accurate first)

• Check the specifications/capacity section in the 10657703704 owner's manual.
• Look for the model and serial/rating label inside the refrigerator compartment (often on a side wall or ceiling area).
• If you still have it, check the original sales receipt or product listing details.
• Measure interior space and estimate capacity (useful when labels are missing).

How to estimate cubic feet by measuring (quick DIY method)

If you cannot access the manual or label, you can estimate capacity:

1. Measure the usable interior of the fresh food section and freezer section separately (in inches):
   • Width (W)
   • Depth (D)
   • Height (H)
2. Compute cubic feet for each section:
   • Cubic feet = (W × D × H) ÷ 1728
3. Add the two sections together.

Estimation table

What you measure	What to do	What you get
Fresh food interior (W×D×H)	Multiply, then divide by 1728	Fresh food cubic feet
Freezer interior (W×D×H)	Multiply, then divide by 1728	Freezer cubic feet
Both totals	Add them	Estimated total capacity

Why it matters

Cubic feet helps us match the right refrigerator parts and accessories (like shelves, bins, and a refrigerator water filter) and it also sets expectations for food storage and airflow. Capacity is a spec tied to the cabinet design, not something the model number reliably encodes.

Last updated: February 2026

Common problems on Kenmore Elite side-by-side refrigerators like model 10657703704 usually involve cooling performance, ice and water dispensing, and door sealing. Many issues trace back to airflow restrictions, a clogged water filter, a failing ice maker, or a defrost system problem; our 10657703704 owner's manual troubleshooting section helps narrow it down.

Most common symptoms we see

• Refrigerator or freezer not cold enough (warm temps, soft ice cream)
• Ice maker not making ice or making small/hollow cubes
• Water dispenser slow, sputtering, or not dispensing
• Frost buildup on the freezer back wall (defrost issue)
• Noisy operation (fan noise, rattling, buzzing)
• Doors not closing smoothly or not sealing (warm air leaks)

Quick checks you can do first

1. Confirm airflow: Do not block vents; the manual calls out “ensuring proper air circulation.”
2. Check the condenser area: Dust buildup can raise temps and increase run time.
3. Look for frost patterns: Heavy frost often points to a defrost heater, thermostat, or airflow problem.
4. Verify water supply: Kinked line, low house pressure, or a clogged filter can affect both ice and water.
5. Listen for fans: Evaporator fan noise or no airflow can cause warm sections.

Parts that commonly solve these problems

Symptom	Common cause	Example part for 10657703704
Slow water, poor ice	Clogged filter	Genuine Kenmore refrigerator water filter EDR3RXD1
No ice	Failed ice maker	Refrigerator ice maker 2198597
Frost buildup, warm temps	Defrost failure	Refrigerator defrost heater WP2323198
Door not closing right	Worn cam/hinge area	Refrigerator door cam (black) WP2182179

Why it matters

Cooling, ice, and water problems often share the same root causes: restricted airflow, poor heat rejection at the condenser, or weak water flow. Fixing the underlying cause protects food temperatures, improves ice production, and reduces compressor run time.

Last updated: February 2026

A Kenmore Elite refrigerator typically lasts 12 to 15 years. For your Kenmore Elite 10657703704 side-by-side refrigerator, consistent airflow, clean condenser areas, and on-time water filter changes help it reach that normal service life; poor ventilation and skipped maintenance shorten it.

Typical lifespan and what affects it

Most refrigerators fall into the same general range, but real-world lifespan depends on how hard the sealed system and fans have to work.

• Keep proper air circulation around the cabinet and vents (crowding the unit raises run time)
• Clean dust from the condenser area regularly
• Keep door gaskets sealing so the compressor does not run constantly
• Replace the water filter on schedule to protect water flow and ice maker performance
• Avoid overloading shelves so air can move through the fresh food and freezer sections

For model-specific operating and care guidance, follow the 10657703704 owner's manual.

Maintenance checklist (simple, high impact)

Use this quick routine to protect cooling performance and reduce wear on the compressor, evaporator fan motor, and defrost system.

Task	How often	Why it helps
Vacuum condenser area	Every 6 to 12 months	Lowers heat load and run time
Check door seal for gaps	Monthly	Prevents warm air leaks and frost
Confirm temps (37°F fridge, 0°F freezer)	Monthly	Reduces overcooling and icing
Replace water filter	About every 6 months or 100 gallons	Maintains flow and water quality

If your unit uses the base grille filter style referenced in the manual, the matching replacement is the genuine Kenmore refrigerator water filter EDR3RXD1.

Why it matters

A refrigerator that runs longer than necessary (from dirty coils, poor airflow, or leaky gaskets) puts extra stress on the compressor, condenser, and evaporator fan. That added run time is one of the fastest ways to reduce overall lifespan.

Last updated: February 2026

Kenmore Elite is Kenmore’s premium product line that was introduced in the late 1990s. For your Kenmore Elite side-by-side refrigerator model 10657703704, the exact build date is tied to the serial number on the rating plate; use the 10657703704 owner's manual to locate it and match features.

What we can date accurately for your refrigerator

The “Kenmore Elite” name is a line designation, not a manufacture date. To identify when your specific 10657703704 refrigerator was made, use these checks:

• Find the model and serial tag inside the fresh food compartment (often on a side wall or ceiling)
• Record the full serial number exactly as shown
• Use the manual’s identification section to confirm the tag location and format
• Keep the serial number with your parts list for future repairs

Common “Elite” features you may see on this model

Many 106.57703704 units include ice and water features that depend on the correct replacement parts.

System	What it does	Example compatible part
Water filtration	Improves taste and odor; supports dispenser flow	Genuine Kenmore refrigerator water filter EDR3RXD1
Ice maker	Produces ice for the bin and dispenser	Refrigerator ice maker 2198597
Defrost system	Prevents frost buildup on the evaporator	Refrigerator defrost heater WP2323198

Why it matters

Knowing the general “Kenmore Elite” introduction period helps with product history, but repairs and compatibility depend on the exact model and serial information. Using 10657703704 (and your serial number) keeps you aligned on the right water filter, ice maker, and defrost parts.

Last updated: February 2026

Water leaking from your Kenmore Elite side-by-side refrigerator model 10657703704 is usually caused by a clogged defrost drain, a leaking dispenser water line, or a water filter connection that is loose or recently disturbed. Start by checking where the water appears (under the freezer, under the fresh food door, or at the dispenser). For model-specific checks and locations, use the 10657703704 owner's manual.

Quick checks by where the water shows up

• Puddle under the freezer side: defrost drain is likely clogged or frozen.
• Drips at the dispenser area: normal “after-drip” (1 to 2 drops) or a line/connection issue.
• Water inside the refrigerator (bottom shelf/crisper area): defrost drain backing up and overflowing.
• Water after changing the filter: filter not fully seated or air in the line.

Fix the most common cause: clogged defrost drain

A clogged drain lets defrost water overflow into the freezer or fresh food section and then onto the floor.

• Unplug the refrigerator.
• Remove items from the freezer floor area and look for ice buildup near the drain trough.
• Melt ice with warm water (do not use sharp tools).
• Flush the drain with hot water until it flows freely to the drain pan.

What you should see

Check	Normal	Problem sign
Defrost water path	Water flows to drain pan	Water pools or refreezes
Freezer floor	Mostly dry	Sheet ice or standing water

If the leak is at the dispenser

The manual notes that 1 to 2 drops after dispensing is normal. If it is more than that:

• Hold the glass under the dispenser 2 to 3 seconds after releasing the lever.
• If the leak started after a filter change, remove and reinstall the filter, then flush several glasses of water.
• Inspect the filter housing and cap for cracks or a poor seal; replace the refrigerator water filter cap (black) WP2260518B if it is damaged.

Parts that commonly relate to water leaks on this model

Symptom	Likely area	Example part for 10657703704
Leak after filter change	Filter seating/cap	Refrigerator water filter cap (black) WP2260518B
Slow fill, odd flow, leaks at connections	Water supply valve	Refrigerator water inlet valve assembly WPW10159839
Cracked or leaking line	Internal tubing	Refrigerator water tube 8201597

Why it matters

Water leaks can lead to ice buildup, warm temperatures, and floor damage. Fixing a drain clog or a loose water connection early helps protect the evaporator area, fan airflow, and ice maker performance.

Last updated: February 2026