Kenmore 66513229N412 dishwasher Parts

Yes. You can still get replacement parts for Kenmore dishwashers, including model 66513229N412. The key is matching parts to your exact model number; many Kenmore dishwashers share components with Whirlpool-built designs, so common service parts remain widely available.

How to make sure you order the right part

Use the full model number 66513229N412 and confirm the part by name and ID before ordering. We recommend checking the exploded views and part lists in the 66513229N412 owner's manual.

Common checks that prevent wrong-part orders:

• Match the full model number exactly: 66513229N412
• Compare the part name and part ID (not just a description)
• Verify the symptom (drain issue, leak, rack problem, no heat) before buying
• Inspect for visible damage (cracks, broken tabs, worn rollers, loose wiring)
• If multiple versions exist, confirm by your dishwasher’s serial number range (when listed)

Parts that are commonly available for this model

For 66513229N412, these are examples of frequently replaced parts we stock for typical repairs:

Problem area	Example part for this model	What it helps fix
Upper rack won’t adjust or is loose	Dishwasher rack adjuster W10712395	Rack height/roller support issues
Dishwasher won’t drain or drains poorly	Dishwasher drain pump (WPW10348269)	Standing water, slow drain
Not drying or water not heating well	Element assembly (W10703867)	Poor drying, lukewarm wash
Leaks at the bottom of the door	Dishwasher door seal, lower (W10909089)	Drips at door bottom

Why Kenmore parts are still obtainable

Kenmore is a brand name; many Kenmore dishwashers were manufactured by major OEMs (commonly Whirlpool). That means parts like spray arms, inlet valves, drain pumps, door latches, and rack hardware often remain in production or have direct replacements.

When to look up error codes first

If your dishwasher is showing an error code or beeping pattern, identify the code before ordering parts. That narrows the repair to the right system (drain, fill, heating, control).

Use: Kenmore 665 model dishwasher error codes

Why it matters

Ordering by model number and symptom saves time and avoids repeat repairs. A “won’t drain” complaint, for example, can be a drain pump, a kinked drain hose, or a blocked filter; confirming the cause first prevents unnecessary part returns.

Last updated: February 2026

Your Kenmore dishwasher’s model number is printed on the model and serial number label, which is typically located around the door opening on the tub or inner door area. For your unit, the model number format can look like 665.1322*, and the exact number is what we use to match the right parts and diagrams.

Where to look first (fastest checks)

• Open the dishwasher door and look along the inner door frame.
• Check the tub rim around the opening (left or right side).
• Look on the inside edge of the door itself.
• If you see multiple numbers, use the one labeled Model (not just Serial).
• Write it down exactly, including any dots and suffix digits.

What the label looks like and what you need

The label usually lists both a model and serial number. The model number is the key for ordering parts for Kenmore dishwashers like 66513229N412.

On the label	What it’s used for	Example
Model	Parts lookup, diagrams, compatibility	66513229N412
Serial	Manufacturing info, service reference	Varies

If you can’t find it in the door opening

These are less common, but worth checking:

• Along the side of the tub just behind the gasket area
• On a side panel (visible only if the unit is pulled out)
• In your paperwork: 66513229N412 owner’s manual

Why it matters

Kenmore model numbers (especially 665-prefix designs) determine the exact rack hardware, pumps, and seals your dishwasher uses. For example, the correct upper rack hardware can depend on the model, including parts like the dishwasher rack adjuster W10712395.

Last updated: February 2026

If your Kenmore dishwasher model 66513229N412 is leaking from the bottom, the most common causes are excess suds (overflow), an unlevel installation, or a leak at a pump, hose, or door seal area. Start by confirming the dishwasher is level and you are using the correct detergent per the 66513229N412 user manual.

Quick checks that fix many bottom leaks

• Use only automatic dishwasher detergent; hand soap causes suds and overflow.
• Reduce detergent if you have soft water; too much detergent creates foam.
• Confirm the dishwasher is level and securely installed.
• Check the tub edge and door area for debris that prevents a tight seal.
• Look for water tracks under the unit after a cycle to pinpoint the side or corner.

Most likely leak sources on this model

Bottom leaks usually come from one of these areas:

Where you see water	Most common cause	What to inspect next
Front center or corners	Door seal area or oversudsing	Lower door seal, detergent type/amount
Under the middle	Pump, sump, or grommet seep	Sump area, clamps, grommet
Left or right side underneath	Fill or drain plumbing	Inlet valve connection, drain hose routing

Parts that commonly relate to bottom leaks

If you find dripping at the pump area or hoses, these model-matched parts are common suspects:

• Dishwasher pump grommet WPW10538166 (seals pump connections at the sump area)
• Dishwasher drain pump WPW10348269 (can leak at the housing or seal)
• Dishwasher circulation pump-to-sump hose W10445975 (check for splits and loose clamps)
• Dishwasher door seal, lower W10909089 (helps prevent water escaping at the bottom of the door)

Why it matters

A small leak can quickly damage flooring and cabinets, and oversudsing can also interfere with proper filling and washing. Fixing the root cause (leveling, detergent, or a leaking pump or seal) prevents repeat leaks and protects the dishwasher base.

Last updated: February 2026