Sanyo Space heater Parts — Browse All Models

How to replace the temperature control thermostat on a Sanyo space heater

• Unplug the heater power cord or shut off the house circuit breaker for the heater to disconnect electrical power. Wear work gloves to protect your hands during the repair.
• Remove the temperature control knob from the temperature control thermostat stem.
• Remove the front grille cover from the heater.
• Remove the temperature control thermostat mounting screws and pull the thermostat out slightly.
• Disconnect the wires from the temperature control thermostat and pull the thermostat out.
• Connect the wires to the new thermostat and mount the new thermostat in the heater.
• Reassemble the space heater and restore electrical power by plugging in the power cord or resetting the house circuit breaker.

Safety instructions for your Sanyo space heater

• Carefully follow all installation instructions to properly and safely install the space heater in a suitable location.
• Only mount the heater in a vertical position. Don't attempt to mount the heater horizontally.
• Mount the heater at least 6-inches above the floor and no closer than 12-inches from the adjacent wall.
• Don't mount the heater over a bathtub or shower stall enclosure.
• Don't block the wall heater by mounting it under a towel rack or behind a door.
• Read and follow all operating and safety instructions in the owner's manual.