Owner’s manual
Error Codes
How to read Kenmore refrigerator model number?
Your Kenmore refrigerator model number is the ID we use to match the correct parts and diagrams for your exact unit; for model 10672003010, you will typically find it on a rating label inside the fresh food section or freezer, or behind the lower front kickplate.
Check these common locations on Kenmore bottom-mount refrigerators like 10672003010:
- Inside the refrigerator compartment on a side wall (often near the crisper area)
- Inside the refrigerator door frame (open the door and look around the perimeter)
- Inside the freezer compartment on a side wall or ceiling
- Behind the lower toe grille or kickplate (front bottom)
- Behind the lower crisper drawer area (on the liner wall)
If the label is dirty or faded, wipe it gently with a damp cloth and dry it so the characters are easier to read.
Kenmore model numbers are used to identify the product platform and the exact configuration (features, color, and production run). Entering the full model number exactly as shown on the label helps ensure you get the right items, such as a door gasket, ice maker, or control board.
| What you see on the label | What it’s used for | Example |
|---|---|---|
| Model number | Finds correct parts and diagrams | 10672003010 |
| Serial number | Identifies your specific unit’s build | Varies |
- Copy the model number character-for-character (including any leading zeros)
- Use uppercase letters if any appear on the tag
- Do not use the patent number or other long codes on the label
- If there is a revision after the model (such as a suffix), include it when searching
A single digit difference can change fit and compatibility; using the correct model number helps prevent ordering the wrong refrigerator parts and reduces installation issues.
For additional model-specific details and label location guidance, use the 10672003010 manual.
Last updated: January 2026
Why is my Kenmore refrigerator leaking underneath?
Water under your Kenmore refrigerator model 10672003010 is most often caused by a clogged or frozen defrost drain that overflows into the cabinet and then onto the floor. Clearing the drain path and checking the drain tube and drain pan usually stops the leak.
- Defrost drain clogged with food debris or ice: water backs up and leaks out under the unit.
- Drain tube restricted or out of position: water misses the drain pan and ends up on the floor.
- Cracked or shifted drain pan: defrost water drips underneath instead of evaporating.
- Water supply connection leak (if you have an ice maker): slow drips can pool under the refrigerator.
- Door not sealing well: excess frost leads to heavy defrost water and overflow.
- Unplug the refrigerator.
- Remove items from the bottom of the fresh food section and access the rear interior area where the drain trough and hole sit.
- Melt any visible ice with warm water (not boiling) and clear the drain hole with a soft tube cleaner.
- Flush the drain with warm water until it flows freely to the drain pan.
- Reassemble and restore power.
For model-specific access points and panel removal steps, follow the 10672003010 owner's manual.
If clearing the drain helps only temporarily, the drain path may be damaged or not routing water correctly.
| Symptom | Most likely area | What typically fixes it |
|---|---|---|
| Water appears after defrost cycles | Defrost drain path | Clear drain; replace drain tube if split |
| Water near back/bottom | Drain tube to pan | Reseat or replace tube |
| Water near water line | Inlet valve or fittings | Tighten/replace leaking component |
Model-matched part to consider if the drain tube is cracked or missing: refrigerator drain tube W10619951.
Leaks underneath can lead to floor damage and can also indicate a defrost drainage problem that may cause ice buildup around the evaporator, reducing cooling performance over time.
Last updated: January 2026
Who makes Kenmore 10672003010?
Kenmore model 10672003010 is a Kenmore-branded refrigerator built for Kenmore by the manufacturer tied to the 106 model prefix. For this model, the 106 prefix indicates Whirlpool as the manufacturer behind the Kenmore unit.
We use the model number prefix on the identification tag to identify who built the refrigerator.
- Find the identification tag inside the fresh food compartment (commonly on a side wall)
- Confirm the full model number is 10672003010
- Use the first three digits (the prefix) to identify the manufacturer
- Keep the full model number handy when ordering parts like a control board, ice maker, or door gasket
| Kenmore model prefix | Typical manufacturer | What it helps with |
|---|---|---|
| 106 | Whirlpool | Parts matching, wiring layouts, service-style components |
| 253 | Frigidaire/Electrolux | Error code families, common design platforms |
| 795 | LG | Filter styles, board layouts, fan and sensor families |
Knowing who built your Kenmore 10672003010 helps us match the correct part design and troubleshooting approach, especially for cooling issues, ice maker problems, and door seal fit.
If you are diagnosing a symptom, these are common manufacturer-specific parts used on this platform:
- Refrigerator ice maker D7824706Q
- Refrigerator electronic control board WPW10317076
- Gasket-fip W11368721
For model-specific locations and diagrams, use the 10672003010 manual.
Last updated: January 2026
