Craftsman 917275810 tractor Parts

Yes, Craftsman mowers can use Briggs & Stratton engines, and the Craftsman model 917275810 specifically is equipped with a Briggs & Stratton engine (listed in the engine section of the 917275810 owner's manual).

On this model, engine-related maintenance and many tune-up parts are typically matched to the Briggs & Stratton engine model/type shown for the tractor, not just the tractor model number.

Common engine-related items you may service include:

• Spark plug (the manual lists Champion RC12YC with a .030 in gap)
• Air filter and pre-cleaner
• Fuel filter
• Engine oil and (if equipped) oil filter
• Muffler and spark arrester (if equipped)

Craftsman has used multiple engine suppliers across different mower lines and years, so the engine brand is best confirmed by checking the engine label on the blower housing or valve cover.

Look for:

• Engine manufacturer name (Briggs & Stratton, Kohler, etc.)
• Engine model and type code
• Emissions label information

If you are doing a seasonal tune-up or chasing a performance issue, deck and drive components can also affect how the tractor feels under load.

Examples for this model include:

• A worn blade drive belt can slip and reduce cutting performance
• Dull or damaged blades can strain the engine and leave a poor cut

If you are servicing the deck, a common replacement item is the lawn tractor v-belt 532144959 (blade drive belt).

Knowing whether your Craftsman mower uses a Briggs & Stratton engine helps you choose the correct maintenance parts and follow the right specifications (oil type/viscosity, spark plug type and gap, fuel recommendations), which directly affects starting, power, and engine life.

Last updated: January 2026

For Craftsman lawn tractor model 917275810, use SAE 30 engine oil when operating above 32°F, and SAE 5W-30 when operating below 32°F. Use a high-quality detergent 4-cycle oil that meets API service SG-SL (see the 917275810 owner's manual).

This model’s manual lists two acceptable viscosity grades based on outdoor temperature.

When you’re shopping for oil for the 917275810, look for:

• 4-cycle engine oil (never 2-cycle mix)
• SAE 30 or SAE 5W-30 (based on temperature)
• API SG-SL rating (or stated as meeting/exceeding it)
• A reputable brand formulated for small engines
• Enough oil for a full change (capacity varies depending on whether an oil filter is installed)

The 917275810 manual lists these approximate capacities:

• With oil filter: 3.5 pints
• Without oil filter: 3.0 pints

Because some engines are equipped differently, we recommend confirming whether your tractor has an oil filter before filling to capacity.

Using the correct viscosity helps your Briggs and Stratton 4-cycle engine maintain proper oil pressure and cooling. Oil that’s too thick in cold weather can make starting harder; oil that’s too thin for conditions can increase wear.

Last updated: January 2026

Your Craftsman riding tractor’s model number is printed on the product identification label on the tractor frame. For model 917275810, the label is typically located under the seat area or near the rear fender pan; confirm the exact location and format in the 917275810 owner's manual.

Check these common ID-label locations used on Craftsman front-engine lawn tractors:

• Under the seat (lift the seat and look on the frame or seat pan)
• On the rear fender pan near the seat
• On the frame rail above the rear axle
• Near the transaxle area (rear of tractor)
• Under the hood on the dash tower (less common)

Record the full information exactly as shown so you get the right diagrams and parts:

• Model number (example format: 917.275810)
• Serial number
• Any product number or type code shown on the same label

The same tractor can show the model with or without a dot.

Craftsman tractors often share similar decks, belts, and electrical parts across model families. Using the exact model number ensures you match the correct parts diagrams and avoid ordering the wrong blade, V-belt, or ignition key.

Last updated: March 2026