Kenmore 11087581810 gas dryer Parts

Many Kenmore dryers, including many Kenmore 110-series machines like model 11087581810, were built for Kenmore by Whirlpool; other Kenmore dryer lines were built by different manufacturers (commonly LG for many front-load/stacking designs). The most reliable way to tell is by checking the model prefix and the parts used on your exact dryer.

We use a few practical checks that work well for Kenmore gas dryers:

• Model prefix: Many Kenmore models starting with 110. are Whirlpool-built.
• Parts crossovers: If common wear parts match Whirlpool-style designs, that supports Whirlpool as the builder.
• Component style: Burner/ignition layouts and drum support designs often follow the OEM’s platform.
• Service history: Prior repairs sometimes list OEM-style part numbers or descriptions.
• Exact model match: Always confirm using the full model number on the rating label.

If your Kenmore dryer is Whirlpool-built, you typically shop and troubleshoot it like a Whirlpool platform dryer. For example, common mechanical drive parts are shared across many Whirlpool-built Kenmore 110 dryers.

Knowing whether Whirlpool built your Kenmore dryer helps you choose the right replacement parts (belt, blower wheel, gas valve coils) and follow the right troubleshooting path for ignition, airflow, and drum drive issues.

Last updated: February 2026

To tell what Kenmore dryer model you have, locate the model/serial tag on the dryer and match the full model number exactly as printed (for example, 11087581810). Using the exact model number ensures you get the right Kenmore gas dryer parts and troubleshooting info.

Most Kenmore dryers have the tag in one of these common spots:

• Inside the door opening on the front panel (most common)
• On the back panel of the dryer cabinet
• On the door frame area near the lint screen housing
• Behind the lower access panel (on some designs)

Kenmore model numbers are usually a long string of digits. The first three digits often indicate the manufacturing source (for example, many Kenmore dryers start with 110).

Before you buy a belt, igniter, or door switch, we recommend these checks:

• Copy the model number character-for-character (no spaces added)
• Take a clear photo of the tag for reference
• Confirm the appliance type (your page is for a Kenmore gas dryer)
• Match the symptom to the right part category (heat, drum turning, door/latch)
• When replacing common wear items, compare the old part shape and mounting points

If you are diagnosing a “won’t start” issue after confirming the model, common suspects include the dryer door switch W10820036 and drive components such as the belt 341241.

Kenmore used multiple manufacturers and designs across different series. The exact model number is what ties your dryer to the correct parts diagram, compatible replacements, and repair steps.

Last updated: February 2026

For a Kenmore gas dryer like model 11087581810, you typically do not replace a heating element; heat is produced by a gas burner assembly. Most “no heat” repairs on this model range from about $25 to $200 for parts, and about $150 to $400 total if you hire a technician (parts plus labor).

On model 11087581810, these parts commonly fix “won’t heat” or “heats then stops” symptoms:

• Dryer gas valve coil kit 279834 (very common for intermittent heat)
• Dryer igniter 279311 (glows weakly, cracks, or never ignites gas)
• Dryer radiant sensor WP338906 (burner lights briefly then shuts off)
• Airflow-related items (lint buildup, crushed vent, blocked exterior hood)
• Less common: gas valve, motor, or wiring issues

Prices vary by brand, location, and what failed, but these ranges are typical for gas-dryer heat repairs:

We recommend these safe, high-impact checks first because poor airflow can mimic a failed burner part:

• Clean the lint screen and confirm strong airflow at the outside vent hood.
• Inspect the vent hose for kinks, crushing, or long runs with many elbows.
• Run a timed dry cycle and listen for burner ignition (click, whoosh, steady flame).
• If heat starts then stops after a few minutes, prioritize the gas valve coils.
• If the igniter never glows, check the door switch and power supply first.

A “heating element” quote often applies to electric dryers, but your Kenmore 11087581810 gas dryer heats with a burner. Targeting the correct gas-heating parts (and fixing airflow) prevents repeat failures, long dry times, and overheating.

Last updated: February 2026

Most Kenmore gas dryers like model 11087581810 are full-size units that measure about 27 inches wide, 27 to 29 inches deep, and 38 to 44 inches tall (height varies most with the control panel style and leveling legs). For an exact fit, measure your specific cabinet and door swing.

These are the most common exterior ranges we see for Kenmore 110-series style dryers:

• Width: ~27 inches
• Depth (cabinet): ~27 to 29 inches
• Height: ~38 to 44 inches
• Door clearance: plan extra space in front for the door to open fully
• Vent and gas line space: allow a few inches behind the dryer for connections

Use a tape measure and record the largest point (not just the cabinet box).

• Measure width at the widest point of the cabinet
• Measure depth from the front edge to the furthest rear point (often the vent connection)
• Measure height from the floor to the highest point on the top or console
• Add space for hoses, venting, and shutoff valve access
• If you are placing it in a closet, confirm door swing and airflow clearance

Dryer “fit” problems usually come from underestimating depth and rear clearance. Planning for vent routing and the gas connection helps prevent crushed ducts, restricted airflow, longer dry times, and overheating.

If you are also planning a repair while you have the dryer pulled out, common wear items for this model include the belt 341241 and dryer idler pulley WP691366.

Last updated: February 2026

On most Kenmore 700 series dryers, including Kenmore model 11087581810, the model number is on the door opening area: open the dryer door and look for the rating label on the frame just inside the opening, typically along the top, side, or near the lint screen housing.

• Door opening frame (cabinet front) just inside the door
• Inside the door itself (on the door edge or inner panel)
• Rear panel rating label (back of the cabinet)
• Side panel near the bottom (less common)
• Under the top panel lip at the front edge (some designs)

The label usually includes:

• Model number (for this page: 11087581810)
• Serial number
• Electrical rating information
• Brand name (Kenmore)

Write down the model number exactly as printed; Kenmore numbers are often long and can be mistaken for the serial.

We use the model number to match the correct gas dryer parts for your exact configuration (door switch style, drum support parts, and burner components can vary by model).

If you need a common “ID check” part while you’re troubleshooting, the door area you’re inspecting is also where issues like a failed dryer door switch W10820036 often show up (the dryer may not start if the switch is not closing).

Last updated: February 2026