Kenmore 58715263900A dishwasher Parts

Yes. We still support Kenmore dishwasher parts, and for model 58715263900A many common repair items are available, including water, drain, heating, and door-sealing components. The key is matching parts to your exact model number and configuration using the 58715263900A owner's manual.

How to find the right part (and avoid wrong-fit returns)

• Use the full model number 58715263900A from the rating label, not just “Kenmore dishwasher.”
• Match the symptom to the system: fill (water inlet), wash (pump/motor), heat (heater), drain (drain hose), leak (door seal/gaskets).
• Compare the part name and ID carefully before ordering.
• If you are installing or reconnecting the unit, follow the 58715263900A installation guide for water, drain, and electrical connection basics.
• Replace seals and O-rings any time you open a pump or sump area to prevent leaks.

Common parts customers replace on this model

Here are examples of parts available for 58715263900A that cover the most frequent dishwasher repairs:

Problem you see	Likely part area	Example part for this model
Not draining, slow drain	Drain path	Drain hose 807117001
Not filling, no/low water	Water supply	Dishwasher water inlet valve 154637401
Poor wash, weak spray	Wash circulation	Pump A00126401 or dishwasher pump and motor assembly 154844301
Water leaking at door	Door sealing	Dishwasher door seal 809006501
Dishes not drying well	Heating	Heater 154825001

Why it matters

Dishwasher parts are highly model-specific. Using the exact 58715263900A model number helps ensure the correct fit, proper water sealing, and safe electrical installation practices.

Last updated: February 2026

The Kenmore dishwasher model 58715263900A is a standard built-in size: it fits a 24-inch-wide cabinet opening and is designed for a typical countertop height around 34 inches, with adjustable leveling legs to fine-tune the installed height. For exact fit details, use the 58715263900A installation guide.

Key dimensions and fit points

These are the measurements that matter most when you are checking your opening and hookups:

• Cabinet opening width: typically 24 inches for this built-in platform
• Cabinet opening height: commonly 34 inches; the leveling legs adjust to match the opening
• Minimum opening guidance: an opening height of at least 33-3/4 inches is a common fit threshold for built-in installs
• Utility routing: water, drain, and electrical lines must stay in the designated routing areas so they do not interfere with the motor/frame
• Best placement: usually next to the sink for easier access to existing plumbing

What to measure before you buy parts or install

Measure these three items to avoid clearance problems:

• Opening width (inside cabinet to inside cabinet)
• Opening height (underside of countertop to finished floor)
• Opening depth (front of cabinet to back wall, accounting for hoses)

Measurement	Where to measure	What you’re confirming
Width	Inside cabinet walls	24-inch built-in opening fit
Height	Countertop underside to floor	Leveling leg adjustment range
Depth	Cabinet front to back wall	Space for drain hose and wiring

Why it matters

Dishwashers can look “standard,” but installation success depends on the opening height and how the drain hose, hot water line, and electrical cable route behind the kickplate. Correct measurements prevent kinks, rubbing, and leaks.

Related install and performance tips

• Keep the drain hose and water line from kinking; kinks can cause fill or drain problems.
• Use a dedicated 120V circuit sized appropriately for the installation.
• If connecting to a disposer for the first time, make sure the disposer inlet plug is removed.
• For better day-to-day results, follow loading and cycle guidance in how to use your dishwasher efficiently.

Last updated: February 2026

Yes, repairing a Kenmore dishwasher like model 58715263900A is usually worth it when the unit is under about 10 years old and the fix is a common wear item (seal, hose, valve) or a straightforward service. If the repair involves major electrical or motor-driven components, compare the total repair cost to replacement.

Quick decision checklist

• If the dishwasher leaks, start with seals, hoses, and clamps before assuming a pump failure.
• If it won’t fill, the water supply and inlet valve are the first checks.
• If it won’t drain, look for a kinked/blocked drain hose or a drain path restriction.
• If it won’t start, rule out door latch and control issues.
• If multiple major symptoms show up at once (leak + no drain + no heat), replacement often makes more sense.

Typical repair cost vs. value (rule of thumb)

Use this as a practical guide for the 58715263900A; exact totals depend on labor rates and what failed.

Repair type	Common parts involved	Usually worth it when…
Leak at door/tub front	Dishwasher door seal 809006501	Leak is localized and the unit otherwise runs normally
No fill / slow fill	Dishwasher water inlet valve 154637401	Water supply is good and the valve screen is clogged or valve is failing
No drain / poor drain	Drain hose 807117001	Hose is kinked, restricted, or leaking
No wash / weak spray	Pump A00126401 or dishwasher pump and motor assembly 154844301	Dishwasher is in good condition and you want to avoid replacing the whole unit

Why it matters

A dishwasher repair is most cost-effective when it restores reliable washing with a single targeted fix. The installation instructions also emphasize basics that prevent repeat problems, such as keeping water and drain lines kink-free and checking for leaks after turning the water back on.

What we recommend before you decide

1. Confirm the symptom and run a quick inspection using the 58715263900A installation guide.
2. Check for simple causes first: kinks in the water line, kinks in the drain hose, loose clamps, and obvious leaks.
3. If you’re seeing an error code, use the Kenmore he dishwasher error codes guide to narrow the failure to a specific system.

Last updated: February 2026