Kenmore Elite 10656689501 side-by-side refrigerator Parts

Kenmore Elite refrigerator capacity depends on the exact model number. For Kenmore Elite model 10656689501, the cubic-foot capacity is listed in the specifications section of the 10656689501 owner's manual; use that value because other Kenmore Elite models (including French door styles) can be a very different size.

How to find the cubic feet for model 10656689501

Check the capacity in the manual’s Specifications or Product data area. If you are looking at the rating plate inside the fresh food section, confirm it matches 10656689501 so you are using the correct spec.

• Open the 10656689501 owner's manual
• Look for Specifications, Product data, or Capacity
• Note whether it lists total, refrigerator, and freezer capacity
• If you see multiple capacities, use total capacity for “cubic feet”
• If you are comparing models, compare the same style (side-by-side vs French door)

Typical capacity range (for context)

Most Kenmore Elite side-by-side refrigerators are typically in the 22 to 27 cu. ft. range, while many French door models are often larger. That is why a capacity quoted for a different Kenmore Elite model (such as a French door unit) does not apply to 10656689501.

Refrigerator style	Typical total capacity range	What changes the number most
Side-by-side	22 to 27 cu. ft.	Cabinet width, ice-in-door hardware
French door	25 to 31 cu. ft.	Depth class, door design, drawer layout

Why it matters

Capacity affects food storage planning, shelf and bin fit, and replacement-part selection (for example, matching the correct water filter and housing style). If you are replacing filtration parts for this model, use the parts listed for 10656689501, such as the genuine Kenmore refrigerator water filter EDR3RXD1.

Last updated: February 2026

Most Kenmore Elite refrigerators, including the Kenmore Elite 10656689501 side-by-side, typically last 10 to 15 years with normal household use and basic maintenance. Keeping airflow clear, cleaning the condenser area, and maintaining good door seals helps you reach the upper end of that range.

Typical lifespan and what affects it

A refrigerator’s life is driven mostly by compressor run time, heat removal, and how well the doors seal.

• 10 to 15 years is the normal expected lifespan for a modern refrigerator
• Heavy use (large family, frequent door openings) can shorten life
• Poor ventilation or dirty condenser coils increases compressor workload
• Worn door gaskets cause longer run times and temperature swings
• Water and ice issues (filter clogs, valve leaks) can create secondary problems

Quick maintenance checklist (high impact)

Use these habits to reduce wear on the sealed system (compressor, refrigerant tubing) and fans.

• Vacuum dust from the condenser area and grille regularly
• Keep food from blocking interior air vents
• Clean sticky or dirty door gaskets so doors close fully
• Replace the water filter on schedule to protect water flow to the dispenser and ice maker
• Level the refrigerator so doors self-close and seal consistently

Parts that commonly support longer life

These are common wear items for this model that help prevent performance problems when replaced as needed:

Symptom	Often involved part	Example part for model 10656689501
Slow water flow, bad taste/odor	Water filter	Refrigerator water filter EDR3RXD1
No ice or small cubes	Ice maker or water supply components	Refrigerator ice maker 2198597
No water to dispenser/ice maker	Inlet valve	Refrigerator inlet valve W10408179

Why it matters

Once a refrigerator gets past about a decade, small issues like poor airflow, weak door sealing, or restricted water flow can make the compressor run longer and hotter. That extra strain is a common reason older units become less reliable.

For model-specific care and cleaning guidance, follow the maintenance and safety sections in the 10656689501 owner's manual.

Last updated: February 2026

If the ice maker in your Kenmore Elite 10656689501 side-by-side refrigerator is not working, the most common causes are the ice maker switch being OFF, the water supply shutoff valve being closed, or an ice cube jam in the ejector area. Confirm the ON/OFF switch position and water supply first, then check for a jam.

Quick checks (fastest fixes first)

• Make sure the ice maker ON/OFF switch in the freezer is set to ON (left).
• Confirm the household water shutoff valve feeding the refrigerator is fully open.
• Pull out the ice bin and reseat it firmly; the ice maker stops when the bin is removed.
• Look for a cube jammed in the ejector area; clear it with a plastic utensil.
• If a lot of ice was just removed, allow 24 hours for normal production to catch up.

What to inspect if it still will not make ice

Water supply and fill issues

If the mold is dry (no water in the ice maker), focus on water delivery:

• Kinked or frozen water line
• Low water pressure to the refrigerator
• A failing inlet valve

A common replacement for water-fill problems is the refrigerator inlet valve W10408179.

Ice maker assembly problems

If the mold has water but it never freezes or never harvests cubes, the ice maker assembly itself can be the issue (internal thermostat/module). For this model, the complete assembly is the refrigerator ice maker 2198597.

Symptom guide

What you see	Most likely cause	What to do
No ice and mold is dry	Water supply off or valve not filling	Open shutoff; check line; consider inlet valve
Ice jam at ejector	Cube stuck in ejector area	Clear jam with plastic utensil
Not enough ice	Recent heavy use or settings	Wait 24 hours; verify controls

Why it matters

An ice maker depends on steady water flow and a clear harvest path. A closed shutoff valve, a stuck cube, or a weak inlet valve can stop ice production completely, even when the freezer feels cold.

For the exact switch location, bin removal steps, and model-specific troubleshooting notes, use the 10656689501 owner's manual.

Last updated: February 2026