Error Codes
Is Maytag dryer gas or electric?
For model Maytag MDG6000BWW, it is a gas dryer (it uses a gas burner and igniter to create heat, not an electric heating element). You can order model-matched gas-heat parts from the MDG6000BWW parts list or search by model on Sears PartsDirect.
- Look for a gas supply line connected to the dryer (usually black iron pipe or flexible gas connector).
- Check for a burner/igniter area behind the lower front access panel.
- During a heat cycle, you may see the igniter glow briefly before the burner lights.
- The electrical plug is typically standard 120V for a gas dryer (electric dryers commonly use a larger 240V plug).
These MDG6000BWW parts are specific to the gas heating system:
Gas and electric dryers use different heating components and troubleshooting steps. Knowing MDG6000BWW is gas helps you choose the right replacement parts (igniter, radiant sensor, gas valve coils) and avoid ordering an electric heating element that will not fit.
| Symptom | Most common gas-heat checks | Parts often involved |
|---|---|---|
| Runs but no heat | Airflow restriction, burner not lighting | Igniter, radiant sensor, coils |
| Heat starts then stops | Coils weakening as they warm up | Gas valve coils |
| Long dry times | Venting, lint buildup, weak airflow | Lint filter, blower wheel |
If your dryer runs but will not heat, we recommend following a gas-dryer heat diagnostic like gas dryer wont heat troubleshooting video.
Last updated: February 2026
What is the capacity of a Maytag dryer?
Maytag dryer capacity depends on the exact model. For the Maytag MDG6000BWW gas dryer, the capacity is typically in the 6.0 to 7.0 cu. ft. range for full-size dryers of this design; use that range for load planning and basket sizing rather than assuming a newer 7.3 cu. ft. platform.
We recommend treating MDG6000BWW as a full-size dryer and loading by basket volume and airflow, not by weight.
- Fill the drum loosely to about 1/2 to 2/3 full for best tumbling
- Dry bulky items (comforters, jackets) as single large items when possible
- Avoid packing the drum tight; gas dryers need airflow to heat and dry evenly
- If loads take longer than normal, check venting and lint filtration first
Maytag has produced multiple dryer platforms over the years (different drum sizes, cabinet depths, and airflow designs). That is why a capacity claim from a current model line does not transfer cleanly to MDG6000BWW.
| Dryer type | Typical capacity range | What you’ll notice |
|---|---|---|
| Compact dryer | 3.4 to 4.4 cu. ft. | Smaller loads, faster cycles |
| Full-size dryer (common) | 6.0 to 7.0 cu. ft. | Comforters fit, normal cycle times |
| Extra-large full-size | 7.2 to 9.0 cu. ft. | Fewer loads, more room for bulky items |
Capacity affects drying performance. Overloading reduces tumbling and airflow, which can cause longer dry times, higher heat stress on fabrics, and overheating that can trip safety devices.
If your MDG6000BWW is taking too long to dry, start with airflow basics: clean the lint screen and confirm the lint screen is intact and seating correctly. A damaged or missing screen can also let lint migrate into the blower housing.
Helpful parts for airflow and drying performance include the dryer lint filter WP33001808 and the dryer blower wheel 33001790. For more maintenance and efficiency tips, see how to use your clothes dryer efficiently. You can also search by model number on Sears PartsDirect if you need additional parts not listed here.
Last updated: February 2026
What model Maytag dryer do I have?
Your Maytag dryer’s model number is printed on the appliance’s identification label; once you find it, match that number to the parts list for your exact unit (for this page, the model is MDG6000BWW). Using the correct model number ensures you get compatible parts like a timer, igniter, or thermal fuse.
Check these common label locations on Maytag dryers:
- Open the dryer door and look around the door opening (door jamb area)
- Look on the inside face of the door
- Check the back panel of the dryer cabinet
- Check the lower front area behind the toe panel or access panel (if equipped)
- Look near the lint screen housing (some designs place the label nearby)
The ID label typically includes both a model number and a serial number.
| What to record | Example format | Why it matters |
|---|---|---|
| Model number | MDG6000BWW | Identifies the exact parts breakdown for your dryer |
| Serial number | Letters and numbers | Helps confirm production series when parts vary |
Maytag dryer parts can look similar across models, but mounting points, electrical connectors, and gas burner components can differ. Using the exact model number helps you choose the right replacement part the first time.
If your label shows MDG6000BWW, you are already on the correct parts page. Common parts customers replace on this model include the gas igniter 4391996 and the dryer thermal fuse WP33001762. For broader model searches and ordering, use Sears PartsDirect.
Last updated: February 2026
