Kenmore 10651102110 refrigerator Parts

For Kenmore model 10651102110, the exact cubic-foot capacity is typically listed on the model’s rating label or in the specifications section of the documentation; if it isn’t shown there, we can still estimate capacity by measuring the usable interior space and converting cubic inches to cubic feet using a simple formula. See the 10651102110 owner’s manual for model-specific identification and spec details.

Fast ways to find the capacity

• Check the rating label inside the fresh food section (commonly on a side wall, ceiling, or near the crisper area). Capacity is often printed as “cu. ft.” or “total capacity.”
• Look in the specifications section of the 10651102110 owner’s manual.
• Estimate by measurement if you cannot locate a printed capacity.

How to calculate cubic feet (quick estimate)

1. Empty enough space to measure the usable interior (ignore door bins if you want a conservative estimate).
2. Measure interior height x width x depth in inches.
3. Multiply to get cubic inches.
4. Divide by 1,728 to convert to cubic feet.

Example conversion table

What you have	What to do	Result
Inches (H x W x D)	Multiply H x W x D	Cubic inches
Cubic inches	Divide by 1,728	Cubic feet

Tips so your estimate is closer to “real” capacity

• Measure wall-to-wall usable space, not the outside cabinet dimensions.
• Subtract space taken by fixed components (air ducts, light housings, ice maker enclosure).
• If you have a water filter housing inside, include it as “lost” space; on many side-by-side designs it reduces usable volume slightly.

Why it matters

Knowing cubic feet helps us match the right accessories and expectations for storage, cooling load, and maintenance. For example, if you are maintaining water quality and flow, using the correct refrigerator water filter EDR3RXD1 helps keep the dispenser and ice maker performing as designed.

Last updated: January 2026

For Kenmore model 10651102110, the compatible replacement water filter is EDR3RXD1 (Kenmore filter number 9030). Use the same model number on your refrigerator’s ID tag to confirm you are matching parts to this exact unit; then follow the steps in the 10651102110 manual.

How to confirm you are buying the right filter

Use these quick checks before ordering:

• Match the refrigerator model number exactly: 10651102110
• Match the filter ID: EDR3RXD1
• Confirm the filter style matches your housing (push-in or twist-in)
• Replace the filter if water flow is slow or taste/odor changes
• After installing, flush water through the dispenser to clear air and carbon fines

Parts that matter for filter fit and leaks

If the filter will not seat, pops out, or leaks at the filter head, the filter housing area may need inspection.

• Genuine Kenmore refrigerator water filter EDR3RXD1
• Refrigerator water filter housing WPW10121138
• Refrigerator water filter release button (black) WP2260503B

Quick compatibility snapshot

What you have	What to use	Notes
Kenmore side-by-side 10651102110	EDR3RXD1	Listed as Kenmore filter number 9030 for this model
Filter will not latch or ejects	Check housing and release button	Worn tabs or a sticking button can prevent proper locking

Why it matters

Using the correct filter for 10651102110 helps prevent leaks at the filter head, protects the water inlet valve and ice maker from sediment, and keeps dispenser flow and ice production consistent.

Last updated: January 2026

On Kenmore side-by-side refrigerator model 10651102110, the exact water filter location cannot be confirmed from the model-specific information we have here. On many Kenmore 106 side-by-side units, the filter is either inside the refrigerator compartment (upper right) or in the base grille, and some versions use an in-door housing.

How to locate it on model 10651102110

Use these quick checks (no tools needed):

• Look in the fresh food compartment upper right corner for a filter cover or knob.
• Check the base grille (toe kick) at the bottom front for a pull-out or twist filter.
• Inspect the inside wall near the crisper area for a filter head and cartridge.
• If your unit has a dispenser, check for a filter door or release near the dispenser area.
• Confirm the exact spot and removal method in the 10651102110 manual.

If you are replacing the filter

A compatible replacement listed for this model is the genuine Kenmore refrigerator water filter EDR3RXD1. After installing, flush the system by dispensing water and discarding it until the flow is steady and clear.

Common filter location	What it looks like	Typical removal style
Fresh food compartment	Small cover or quarter-turn cap	Twist or pull cartridge
Base grille	Filter protrudes from bottom front	Push button, pull, or twist
In-door housing	Small access door on door liner	Push-to-release or pull

Why it matters

Finding the correct filter housing location and release style helps prevent cracking the filter head or damaging seals, which can lead to leaks and poor water flow to the dispenser and ice maker.

Last updated: January 2026