Can you still get parts for a Kenmore dishwasher?
Yes. We still offer replacement parts for Kenmore dishwashers, including the Kenmore Elite 66513422K701; you match parts by the full model number to ensure fit and function. Commonly replaced items include drain components, spray arms, filters, door hardware, and electrical parts.
How to make sure you get the right part
Use the model number 66513422K701 when selecting parts; Kenmore Elite dishwashers often have multiple similar-looking versions, and small design changes can affect fit.
- Confirm the full model number from the rating label (typically on the tub frame near the door).
- Compare the part name and part ID, not just the description.
- If you are replacing a leak or drain issue, check related items (hose, clamps, seals) at the same time.
- For installation clearances and hookup requirements, follow the installation guide.
- For operating and care details that affect wear items (filters, racks, spray arms), use the owner's manual.
Popular Kenmore Elite 66513422K701 parts customers replace
These are examples of parts available for this model that commonly solve everyday problems:
- Drain problems: dishwasher drain pump WPW10348269, dishwasher drain hose 8269144A
- Poor cleaning: dishwasher spray arm WPW10491331, filter W10872845
- No fill or slow fill: dishwasher water inlet valve WPW10158389
- Dead or intermittent power: fuse W10258275
Quick symptom-to-part checklist
| Symptom | What to check first | Common matching part on this model |
|---|---|---|
| Water left in tub | Drain path and pump | Drain pump, drain hose |
| Dishes not getting clean | Spray action and filtration | Spray arm, filter |
| Not filling | Water supply and valve | Water inlet valve |
| No power | Power supply protection | Fuse |
Why it matters
Dishwasher parts are model-specific; using the exact 66513422K701 match helps prevent leaks, poor wash performance, and repeat repairs caused by a similar-looking but incorrect drain hose, spray arm, or control component.
Last updated: February 2026
How to find Kenmore Elite model number?
For a Kenmore Elite dishwasher like model 66513422K701, we typically find the model number on the rating label around the door area; open the door and check the inner door edge or the tub frame near the latch. The exact label location for your unit is shown in the 66513422K701 owner's manual.
Where to look on the dishwasher
Check these common label locations first (in order):
- Along the top or side edge of the inner door when the door is open
- On the tub frame just inside the opening (left or right side)
- Near the door latch area on the tub rim
- Behind the toe panel (kickplate) area (less common, but possible)
What the model number looks like
On Kenmore dishwashers, the model number is usually a long number string. For this page, the model number format matches:
| Item on label | Example you may see | Why it matters |
|---|---|---|
| Model number | 66513422K701 | Ensures the parts list matches your exact dishwasher |
| Serial number | (varies) | Helps identify production run for service and parts |
Why it matters
Kenmore model numbers can be very similar, and a single digit difference can change the correct fit for parts like a drain pump, water inlet valve, or control. Using the exact model number helps us match the right diagrams and replacement parts the first time.
Quick tip if the label is hard to read
- Wipe the label gently with a damp cloth and a drop of dish soap
- Use a flashlight and take a close-up photo, then zoom in
- Write down the full model number exactly as shown, including any suffix letters/numbers
Last updated: February 2026
Is it worth repairing a Kenmore dishwasher?
Yes, repairing a Kenmore Elite dishwasher like model 66513422K701 is usually worth it when the problem is a common wear item (drain hose, spray arm, inlet valve) or a straightforward electrical issue, especially if the tub is in good shape and the repair cost stays well below replacement.
Quick decision checklist (what we use)
- Age and condition: If racks, door seal, and tub are solid, repairs pay off.
- Repair cost vs. replacement: A good rule is repair when the total is under ~50% of replacement cost.
- Type of failure: Drain, fill, and wash performance issues are often cost-effective fixes.
- Warranty coverage: This model’s warranty can cover certain components for longer than one year (details vary by part and purchase date).
- DIY comfort level: Many dishwasher repairs are accessible with basic tools and safe shutoff steps.
What the warranty language means for repair value
For Kenmore Elite dishwashers, the manual describes coverage such as:
| Component area | Typical impact on “worth repairing” | Why |
|---|---|---|
| Electronic control and power supply board | Often worth repairing early in ownership | Parts may have extended coverage; labor can still apply after year one |
| Ultra Wash wash system (motor, pump, spray arms, seals) | Often worth repairing if the tub and racks are good | Restores core cleaning performance |
| Upper and lower racks | Worth repairing if rust is the only issue | Rack replacement can extend usable life |
Check your owner's manual for the exact warranty terms that apply to your purchase.
Common repairs that are usually cost-effective on 66513422K701
- Drain problems (standing water): replace the dishwasher drain pump WPW10348269 or a drain hose if it is split or restricted.
- Poor cleaning or no spray: inspect and replace the dishwasher spray arm WPW10491331 if clogged or cracked.
- No fill or slow fill: a failing dishwasher water inlet valve WPW10158389 is a common fix.
- Dead unit or intermittent power: a blown fuse W10258275 can be the root cause.
When replacement makes more sense
- Multiple major failures at once (for example, electronic control plus motor issues).
- Heavy corrosion, chronic leaks, or repeated flooding events.
- Repair requires several high-cost assemblies and the dishwasher is already near end-of-life.
Why it matters
A targeted repair keeps your Kenmore dishwasher running efficiently and avoids replacing the entire appliance for a single failed part. Using the correct model-specific parts also reduces repeat breakdowns and installation headaches.
Last updated: February 2026
What are common problems with Kenmore dishwashers?
Common problems we see with the Kenmore Elite dishwasher model 66513422K701 include not starting or stopping mid-cycle (often door not fully latched or a power interruption), not filling (water supply off or the overfill float stuck), poor cleaning from clogged filters, and long cycle times that are normal on high-efficiency designs. For model-specific cycle and troubleshooting checks, use the owner's manual.
Most common symptoms and what they usually mean
- Dishwasher will not run: door not closed tightly and latched, wrong cycle selected, or no power to the unit
- Stops during a cycle: brief pauses can be normal; a power interruption can also trigger a restart requirement
- Will not fill with water: water shutoff valve closed, suds/foam detected, or overfill protection float stuck
- Clean light flashing: commonly points to fill issues, float movement problems, or suds from wrong detergent
- Poor wash performance: filters need cleaning or spray action is restricted
- Cycle seems very long: high-efficiency filtration can push some cycles to 2+ hours
Quick checks you can do safely
- Confirm the door closes firmly and the latch engages.
- Verify the house breaker is on (or replace a blown fuse if applicable).
- Make sure the water supply valve to the dishwasher is fully open.
- Check the overfill protection float; it must move up and down freely (press down to release if stuck).
- Look for excess suds; only use automatic dishwasher detergent and do not overfill.
- Clean the filter system regularly to prevent recirculating food soil.
Parts that commonly relate to these problems (for 66513422K701)
| Symptom | Common part area | Example part on this model page |
|---|---|---|
| Not draining, water left in tub | Drain system | Dishwasher drain pump WPW10348269 |
| Not filling or fills poorly | Water inlet | Dishwasher water inlet valve WPW10158389 |
| Poor cleaning, debris in wash | Filtration | Filter W10872845 |
Why it matters
Catching simple issues early (like a stuck float, blocked filters, or suds from the wrong soap) prevents repeat shutdowns, improves cleaning, and helps protect key wash components such as the pump and spray arms.
Last updated: February 2026





