Kenmore 41744152400 washer Parts

For Kenmore washer model 41744152400, the model and serial number are printed on the identification plate at the top, inside of the door opening. Using the exact model number helps us match the correct parts, diagrams, and troubleshooting info for your washer.

Where to look on model 41744152400

On this Kenmore front-load “tumble action” washer, check these spots in order:

• Open the washer door and look along the top edge inside the door opening (most common)
• Check the inner door frame area for a sticker or metal plate
• If the label is hard to see, use a flashlight and wipe dust off the rim

For a visual reference and other model-specific details, use the 41744152400 owner's manual.

What the model number and serial number look like

You will typically see both fields together on the same plate.

Label item	What it’s used for	Example format
Model number	Choosing correct replacement parts and diagrams	417.XXXXXXXX
Serial number	Manufacturing date tracking and service history	Letters and numbers

Tips if the label is missing or unreadable

If the identification plate is damaged, we use a few practical checks to narrow it down:

• Compare your control panel layout and cycle names to the 41744152400 owner's manual
• Look for paperwork from purchase or installation that lists the model
• Check for a second sticker on the cabinet edge near the door opening
• Avoid ordering parts by “looks”; small design changes can affect fit

Why it matters

Kenmore model numbers (especially the 417-series) determine the exact door lock, drain pump, water inlet valve, and control board versions used. Entering 41744152400 ensures the parts you choose match your washer’s configuration.

Last updated: February 2026

Yes, repairing a Kenmore washer is worth it when the fix restores reliable operation for less than the cost of replacing the machine, especially for common, repairable failures like draining, door locking, or excessive vibration on model 41744152400. Use the 41744152400 owner's manual to match symptoms to the right repair.

A practical repair vs. replace checklist

• Compare the repair total (parts + labor) to the price of a comparable new washer.
• Prioritize repairs that solve a single, clear failure (no-drain, no-fill, won’t start).
• If the washer leaks from the door area, inspect the door boot and clamp first.
• If it won’t drain or leaves water in the tub, suspect the pump or a blockage.
• If it bangs or walks, check leveling and shock absorbers.
• If multiple major systems are failing at once, replacement usually makes more sense.

Common repairs on this Kenmore front-load platform

Symptom	Likely area	Example part for this model
Won’t start, door won’t lock	Door latch/lock	Door catch 131763256
Won’t drain, stops mid-cycle	Drain system	Washer drain pump 137221600
Excessive vibration or banging	Suspension/leveling	Level shock 5304485917
Water leaking at door	Door boot/clamp	Bellows 134515300

Why it matters

A targeted repair can extend the life of a front-load washer and restore performance (proper draining, safe door locking, and stable spinning) without the cost and hassle of replacing the appliance.

Smart next steps before spending money

• Run a complete cycle and watch for leaks and proper operation.
• Confirm the washer is plugged into a properly grounded outlet (no extension cord).
• Review the installation checks and operating guidance in the installation guide.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years. For the Kenmore 41744152400 front-load washer, regular care (especially cleaning and avoiding overloads) helps it reach the longer end of that range; neglected maintenance and repeated heavy loads shorten service life.

Typical lifespan and what affects it

Most washers fall into a predictable window, but usage and upkeep make the difference.

• Load size and frequency: frequent oversized loads wear the motor, tub bearings, and shocks faster
• Water quality: hard water speeds up detergent buildup and valve wear
• Drain habits: coins, lint, and debris strain the pump and can cause slow-drain issues
• Door seal care: keeping the boot clean and dry reduces odor, leaks, and mold
• Leveling: an unlevel washer increases vibration and stress on suspension parts

Maintenance that extends life (high impact)

Use the care steps in the 41744152400 owner's manual and these practical habits:

• Leave the door cracked open between loads to dry the bellows area
• Wipe the door boot after washing bulky or linty items
• Use the right amount of HE detergent to reduce residue
• Check pockets to keep screws, nails, and coins out of the drain system
• Keep the washer level and stable to reduce out-of-balance wear

Common wear items on front-load washers

These parts often drive “repair vs. replace” decisions as the washer ages.

Symptom	Common cause	Example part for model 41744152400
Won’t drain, stops mid-cycle	Drain pump jammed or failing	Washer drain pump 137221600
Door won’t lock or won’t start	Door lock/catch issue	Door catch 131763256
Excessive vibration or banging	Worn shocks or leveling issues	Level shock 5304485917

Why it matters

Knowing the 10 to 15 year lifespan helps us plan maintenance and decide when a repair (like a drain pump or shock kit) is worth it versus investing in a newer washer.

Last updated: February 2026