Owner’s manual
Error Codes
What size is Kenmore refrigerator model 79578416800?
Kenmore refrigerator model 79578416800 is a bottom-freezer refrigerator in the Kenmore 795.7840_ / 795.7841_ model family. For exact exterior dimensions (width, depth, and height), use the specifications section in the 79578416800 owner's manual.
We recommend confirming size from the model’s specifications because dimensions can vary by door style, handle type, and whether measurements include hinges.
- Check the specifications/dimensions page in the manual first.
- Measure width at the widest point (often the hinge area).
- Measure height from floor to the top hinge cover.
- Measure depth two ways: cabinet-only and with doors/handles.
- If you are fitting into a cutout, allow space for door swing and airflow clearance.
If you are planning space before pulling the manual, most Kenmore 795 bottom-freezer units are in this general range.
| Measurement | Typical range (approx.) | What can change it |
|---|---|---|
| Width | 30 to 33 in. | door style, hinge geometry |
| Height | 67 to 70 in. | leveling legs, hinge cover |
| Depth | 30 to 35 in. | handles, door thickness |
Correct dimensions help prevent installation problems like doors that cannot open fully, poor ventilation that reduces cooling performance, or a water line that kinks when the refrigerator is pushed back.
If you are also planning a water hookup, the manual notes common installation needs such as 1/4-inch OD copper tubing and adequate clearance to move the refrigerator out for service. See the 79578416800 owner's manual for the full installation guidance.
Last updated: January 2026
What is the bottom part of a refrigerator called?
On the Kenmore 79578416800 bottom-mount refrigerator, the “bottom part” is most often the base grille on the front and the machine compartment behind it, where key cooling parts (like the compressor and condenser fan area) are located.
Depending on what you are pointing to, the bottom area may be called one of these:
- Base grille: the removable front grille at the bottom (used for access and airflow)
- Machine compartment: the space behind the base grille where cooling components sit
- Lower rear access cover (or back cover): a panel on the back lower section that shields components
- Drain pan: a pan underneath that catches defrost water so it can evaporate
- Kick plate: a common informal name for the base grille
For model-specific handling and safety notes, follow the steps in the 79578416800 owner's manual.
Use this quick guide to match the name to what you see.
| What you see | Most common name | What it does |
|---|---|---|
| Slotted panel at the very bottom front | Base grille | Allows airflow and provides access for cleaning/service |
| Components and wiring behind the grille | Machine compartment | Houses cooling system components |
| Shallow pan underneath | Drain pan | Collects defrost water for evaporation |
| Panel on the lower back | Back cover/access cover | Protects components and directs airflow |
Using the right name helps you find the correct instructions and parts faster. For example, the manual includes specific cautions about working around the base grille and the bottom of the refrigerator to avoid injury or electrical shock.
- Unplug the refrigerator before inspecting the machine compartment
- Avoid reaching into vents or the bottom opening with tools
- If you are removing the base grille, pull it straight toward you with both hands
- Keep the grille clips aligned when reinstalling so it snaps in securely
- Vacuum dust from the grille area to improve airflow and cooling efficiency
Last updated: January 2026
What are the common problems with Kenmore Elite refrigerators?
Common problems on Kenmore bottom-mount refrigerators like model 79578416800 include warm temperatures from dirty condenser coils, doors not sealing or closing fully, ice maker issues (slow or no ice, off-taste), and normal-to-loud operating noises. Our 79578416800 owner's manual troubleshooting tables walk you through the most likely causes.
- Not cooling well: dirty condenser coils, doors not fully closed, airflow blocked by packages
- Doors will not close completely: refrigerator not level, bins or shelves out of position, sticky door gaskets
- Ice maker problems: ice room door not closing tightly, new installation (needs purge), old ice stored too long
- Bad-tasting or smelly ice: food odors migrating, dirty ice bin, mineral taste in water (filter needed)
- Noises: many sounds are normal; persistent buzzing or clicking can point to a compressor start issue
- Confirm doors seal and close: push doors firmly shut; check for packages blocking the door.
- Clean condenser coils: dirty coils reduce heat transfer and make the compressor work harder.
- Level the refrigerator: an unlevel cabinet can prevent proper door closing.
- Check ice room door closure: close it until you hear the “click” so cold air stays where it belongs.
- Dump old ice and wash the bin: stale ice and a dirty bin are top causes of odor.
If troubleshooting points to a failed component, these are common replacements for this model:
| Symptom | Likely area | Example part for this model |
|---|---|---|
| Light stays off or door alarm behavior seems wrong | Door switch | Lg refrigerator door switch 6600JB1010A |
| Frost buildup, temperature swings | Defrost sensing | Refrigerator defrost sensor assembly 6615JB2005C |
| Warm fridge section, weak airflow | Evaporator fan | Motor,dc 4681JB1027C |
| Off-taste/odor in water or ice | Water filtration | Kenmore refrigerator water filter 9990 5231JA2006E |
Most “Kenmore Elite refrigerator problems” start with airflow, sealing, or maintenance. Cleaning condenser coils and making sure doors close fully can restore cooling performance and prevent frost, ice maker trouble, and higher energy use.
- How to replace the water filter in a Kenmore refrigerator
- Kenmore 795 model bottom freezer refrigerator error codes
Last updated: January 2026
