Kenmore 66517033403 dishwasher Parts

Yes. We still support Kenmore dishwasher parts, and for Kenmore model 66517033403 you can replace many common wear items (like the heating element, drain pump, and door seal) using the correct model-based part match from the 66517033403 owner's manual.

How to make sure you order the right part

Kenmore dishwashers are built in multiple design families, so the model number is the key to getting the correct fit and electrical match.

• Match parts using the full model number: 66517033403
• Compare the part name and part ID, not just a description
• Check color and finish when ordering cosmetic parts (for example, control panels)
• If your symptom is intermittent, confirm the failure with basic checks before replacing parts
• Use the wiring and safety guidance in the manual before any electrical testing

Common parts people still replace on this model

These are frequent repair items for Kenmore dishwashers like 66517033403:

Symptom	Common part to check	Example part for this model
Dishes not drying, water not heating	Heating circuit	Dishwasher heating element W10518394
Dishwasher will not drain	Drain system	Dishwasher drain pump WPW10348269
Water leaking at the door	Door sealing surfaces	Dishwasher door seal W10542314
Not filling or fills slowly	Water supply control	Dishwasher water inlet valve WPW10158389

Why it matters

Using the exact model number and the correct OEM-style replacement part helps prevent leaks, poor wash performance, nuisance error codes, and repeat repairs. It also ensures the part matches the dishwasher’s design features shown in the manual (such as the heating element and water inlet opening).

Last updated: February 2026

Your Kenmore dishwasher’s model number is printed on the model and serial number label, which is typically located inside the door opening on the inner door frame or along the tub edge. For the correct parts and troubleshooting steps, match that label exactly (letters and numbers).

Where to look on a Kenmore dishwasher

Check these common label locations first:

• Inside the door opening on the left or right inner door frame
• Along the top edge of the door opening
• On the tub wall just inside the door
• Near the control panel area (visible when the door is open)
• On the side frame behind the toe panel (if your model uses that placement)

The 66517033403 owner's manual shows the “model and serial number label” as a labeled feature inside the door area, which is the most common spot to confirm your exact model.

How to read the model number correctly

Model numbers must be copied exactly to avoid ordering the wrong Kenmore 665-series parts.

• Write it down exactly as shown (no extra spaces)
• Keep any leading numbers (for many Kenmore dishwashers, the model begins with 665)
• Use the full model number, not just the first 3 digits
• Record the serial number too; it helps when checking production variations

Quick example

What you see on the label	What it means for parts lookup
66517033403	Use this full model number to match diagrams and parts
665.17033 (partial)	Not enough; keep searching for the full number

Why it matters

Kenmore dishwashers can look similar across multiple series, but internal components (like the heating circuit, drain system, and control board) can differ by model. Using the exact model number helps us match the right diagrams and parts the first time.

If the label is missing or unreadable

Use these practical options:

• Look for a faint “imprint” on the label area under bright light
• Check for a second label on the frame behind the toe panel
• Compare your control panel style and rack features to the diagrams in the 66517033403 owner's manual

Last updated: February 2026

Yes, repairing a Kenmore dishwasher like model 66517033403 is usually worth it when the problem is isolated (leak, no-heat, won’t drain) and the repair cost stays well below the price of a comparable new dishwasher. We use the 66517033403 owner's manual to confirm symptoms, maintenance steps, and troubleshooting before replacing parts.

Quick decision checklist

• If the dishwasher is under 10 years old, repairs are typically the better value.
• If the repair is simple and targeted (seal, hose, heating issue), repair it.
• If you have repeated leaks or electrical failures, compare repair cost to replacement.
• If the tub is damaged or heavily corroded, replacement usually makes more sense.
• If you can DIY safely (power off at breaker), you can save a lot on labor.

Common repairs on this model and what they usually mean

Symptom	Likely area	Example part for 66517033403	Typical outcome
Dishes not drying, water not heating	Heating circuit	Dishwasher heating element W10518394	Often a cost-effective repair
Water left in bottom, won’t drain	Drain path or pump	Dishwasher drain pump WPW10348269	Often fixable if no clogs
Water leaking at door	Door sealing surface	Dishwasher door seal W10542314	Usually a straightforward repair
No fill or slow fill	Water supply valve	Dishwasher water inlet valve WPW10158389	Good repair if water supply is OK

Before you decide: 5 checks that prevent unnecessary parts

• Clean and inspect the drain air gap (if your sink setup has one); a blocked air gap can mimic a drain failure.
• Verify the breaker is on and the dishwasher has power.
• Check for a kinked drain hose or a clogged sink/disposer connection.
• Confirm the door closes and latches fully; a poor seal can cause leaks and stopping mid-cycle.
• Run a cleaning cycle and follow the care steps in the manual; buildup can cause poor washing and odors.

Why it matters

A targeted repair can extend the life of your Kenmore dishwasher and restore performance without the cost and hassle of replacement. The manual also notes routine care items like cleaning the drain air gap and seasonal shutoff/winterizing steps that help prevent repeat problems.

Last updated: February 2026