Craftsman 917272670 lawn tractor Parts

On the Craftsman lawn tractor model 917272670, the engine system includes the complete engine assembly plus key supporting parts that control speed, route fuel, and handle exhaust. In the parts list for this model, you will commonly see items like the throttle control, muffler, fuel tank, fuel line, and oil drain components called out in the engine section.

These are the engine-related parts most owners deal with for starting, running, and basic maintenance:

• Engine assembly: The Briggs engine used on this tractor (listed as a complete engine in the manual).
• Throttle control: Controls engine speed; tied to the throttle/choke control at the dash.
• Fuel system parts: Fuel tank, fuel line, hose clamp, and fuel cap assembly.
• Exhaust parts: Muffler and muffler gasket.
• Oil service parts: Easy oil drain tube and drain plug.
• Charging/starting support: Alternator and starter drive components (engine-specific list).

For the full illustrated breakdown and the exact part key numbers for model 917272670, use the 917272670 owner's manual.

Some items people call “engine parts” are actually tractor controls that operate the engine.

Replace or inspect engine parts when you notice these symptoms:

• Hard starting or no-start after fresh fuel
• Loss of power under load
• Excessive exhaust noise (often muffler or gasket)
• Fuel smell or visible seepage (tank, line, clamp)
• Messy oil changes or oil seepage at the drain

A good maintenance baseline is a tune-up and inspection; our how to tune up a riding lawn mower video walks through the typical service items.

Knowing the difference between engine components (fuel, exhaust, oil service) and tractor controls (ignition, throttle/choke) helps you order the right Craftsman parts and troubleshoot faster, especially for starting and performance problems.

Last updated: February 2026

Craftsman lawn tractors can be equipped with engines from several manufacturers depending on the specific tractor model and production year. For the Craftsman lawn tractor model 917272670, our 917272670 owner's manual identifies it as a 17.5 HP tractor with a low-emission internal combustion engine, but it does not call out the engine brand name in the excerpted specifications.

The most reliable way is to read the engine’s own ID label, then match it to parts and service info.

• Check the engine shroud/blower housing for a brand decal (common names include Briggs & Stratton, Kohler, Kawasaki).
• Locate the engine model/type/code sticker (often near the valve cover, recoil area, or above the muffler).
• Compare the engine code to the engine section in the 917272670 owner's manual.
• Use the engine code when ordering tune-up items (spark plug, air filter, oil filter) so you get the correct fit.
• If the tractor cranks slowly or only clicks, address the battery and starting circuit first before assuming an engine issue.

Craftsman has historically sourced engines from multiple suppliers. Which one you have depends on the exact model and build run.

Engine brand and engine ID numbers control the correct maintenance parts (air filter, spark plug, oil filter), the right oil capacity guidance, and the correct troubleshooting steps for no-start or poor-running symptoms.

If you’re also servicing the mower deck on 917272670, make sure you match blade style to your cutting goal (mulching vs. high-lift). For example, the husqvarna lawn tractor mulching blade, 21-in 532134149 and the lawn tractor 42-in deck high-lift blade 532138971 are different blade types used for different results.

Last updated: February 2026

On Craftsman lawn tractors like model 917272670, the model number does not contain the build year; you typically determine the year by decoding the serial number on the tractor’s ID tag. Use the date-code format shown in your 917272670 owner's manual to confirm the correct label location and identification details.

Most Craftsman riding mowers have an ID tag or sticker in one of these common spots:

• Under the seat pan (lift the seat)
• On the rear fender pan near the seat
• On the frame rail near the engine
• Near the left or right footrest area
• On the mower deck shell (less common for the tractor serial)

Many Craftsman tractors (including units built by AYP/Husqvarna for Craftsman) use a date-coded serial number where the first digits represent a manufacturing date.

A common format you may see is:

So a serial number starting with 072811 often indicates July 28, 2011.

Before you lock in the year, we recommend these quick validations:

• Confirm you are reading the serial number, not the model number (917272670) or an engine model.
• Look for letters mixed in; some tags include plant codes or prefixes that change the pattern.
• Write down the first 6 digits exactly as shown (including leading zeros).
• Compare the tag info to the tractor specs (this model is a 17.5 HP, 42-inch deck tractor).

The correct manufacturing year helps you match the right parts and diagrams for your Craftsman lawn tractor, especially for deck components like blades, mandrel parts, and belts. For example, this model’s 42-inch deck commonly uses blades such as the husqvarna lawn tractor mulching blade, 21-in 532134149 depending on your deck setup and cutting goal.

Last updated: February 2026