Kenmore Elite 66512813K310 undercounter dishwasher Parts

Common problems we see on the Kenmore Elite dishwasher model 66512813K310 are: not starting or stopping mid-cycle (often a door not fully latched or blinking Start light), not draining (hose kink or disposer plug issue), poor drying, hard-water residue, and odors. Many of these are fixed with basic checks and routine filter cleaning.

Most common symptoms and what usually causes them

• Dishwasher does not run or Start light blinks: door not fully closed/latched, upper rack sitting uneven and preventing the door from closing, cycle interrupted and needs START pressed again.
• Water remains in tub or will not drain: kinked drain hose, food obstruction in drain/disposer, disposer knockout plug not removed, drain pump issue.
• Poor cleaning or detergent left in dispenser: loading interference with wash system, blocked spray action, detergent tablet falling to tub bottom.
• Hard water film, cloudy glassware, spotting: hard water minerals, not using rinse aid, incorrect detergent amount.
• Not drying well: rinse aid not used, cycle/options selection, heating circuit issue.
• Odors: buildup from infrequent cleaning and standing water.

Quick checks we recommend first (fast, no parts)

1. Close the door firmly; if lights are blinking, close the door and press START.
2. Make sure the upper rack is level; an uneven rack can keep the door from closing.
3. Confirm the cycle completed; if not, close the door and press START to resume.
4. If connected to a disposer, confirm the disposer inlet knockout plug was removed.
5. Inspect the drain hose for kinks and check for food blockage in the drain/disposer.
6. For hard water, use rinse aid and clean the ULTRACLEAN filters at least monthly.

Parts that commonly relate to these problems

Symptom	Part that often fixes it	What it does
Won’t drain, water left in tub	Dishwasher drain pump WPW10531320	Pumps water out through the drain hose
Won’t fill or fills slowly	Dishwasher water inlet valve W11175771	Opens to let water into the dishwasher
Poor drying, cool water	Dishwasher heater W10703867	Heats water and supports drying performance

Why it matters

Catching the simple causes first (door closure, loading interference, drain hose/disposer setup, hard-water maintenance) prevents repeat cycle failures, standing water odors, and unnecessary part replacement.

For model-specific operating steps, troubleshooting tables, and maintenance intervals, use the 66512813K310 owner's manual.

Last updated: January 2026

Kenmore Elite dishwasher model 66512813K310 is a Kenmore-branded unit built by Whirlpool (the 665 model prefix is the key identifier). For confirmation details such as the full model series and feature set, check the 66512813K310 use and care guide.

How to tell who built a Kenmore dishwasher

Kenmore is a brand name; different manufacturers have built Kenmore dishwashers over the years. For model 66512813K310, the manufacturer is identified by the prefix in the model number.

• Look at the first three digits of the model number (the prefix).
• 665 indicates a Whirlpool-built dishwasher.
• The full model number (including the suffix) helps match the correct parts and diagrams.
• The model and serial label is typically on the tub frame near the door opening.

Quick prefix guide (common Kenmore dishwasher prefixes)

Kenmore model prefix	Typical manufacturer
665	Whirlpool
587	Frigidaire / Electrolux
363	GE

Why it matters for parts and repairs

Knowing the manufacturer behind the Kenmore badge helps us match the right style of components (rack adjusters, pumps, valves, heaters) and the correct service procedures. For example, Whirlpool-built designs commonly use a specific sump layout, diverter system, and rack hardware.

If you are ordering rack parts for this model, examples of compatible components include the dishrack adjuster kit (W10712394) - dishwasher rack component by whirlpool W10712394 and the dishwasher dishrack roller assembly, lower WPW10195417.

Last updated: January 2026

Water standing in the bottom of your Kenmore Elite dishwasher model 66512813K310 almost always points to a draining problem (blocked drain path, kinked hose, or a weak drain pump). A small amount of water can be normal during operation, but pooled water after the cycle ends needs attention. See the 66512813K310 user manual for the model’s filtration and troubleshooting guidance.

Quick checks that fix most standing-water problems

• Confirm the cycle is fully complete; if it stopped mid-cycle, close the door and press START to resume.
• Clean the ULTRACLEAN filters at the bottom center of the tub; debris here is a top cause of slow draining.
• Check the drain hose routing for kinks, pinches, or a sag that traps water.
• If connected to a garbage disposer, make sure the disposer inlet knockout plug was removed.
• Look for food obstructions at the drain outlet area inside the tub.
• Listen during drain: a humming drain pump with little or no water movement often indicates a jammed or failing pump.

Parts that commonly solve a no-drain or slow-drain symptom

If cleaning and hose checks do not restore normal draining, these model-compatible parts are common fixes:

Symptom	Most likely area	Model-compatible part to consider
Water remains after cycle, pump hums	Drain pump jammed or weak	Dishwasher drain pump WPW10531320
Drains slowly, occasional standing water	Drain hose restricted or collapsing	Dishwasher drain hose 8269144A
Water backs up or won’t drain consistently	Drain path or sump sealing issues	Dishwasher sump and seal assembly WPW10455268

Why it matters

Standing water can lead to odors, poor wash performance, and repeat clogs because the ULTRACLEAN filtration system cannot circulate and drain properly. Restoring normal drain flow protects the pump, sump, and wash system.

Safety and reset notes

Before inspecting wiring or removing the pump, disconnect power at the breaker. After any repair or reinstall work, follow the operational check steps in the 66512813K310 installation guide to confirm the dishwasher fills and runs correctly.

Last updated: January 2026