Kenmore 11024852300 washer Parts

A Kenmore washer typically lasts 10 to 15 years with normal household use. For Kenmore model 11024852300, real-world lifespan depends most on load size habits, installation/leveling, water quality, and how consistently you follow the care steps in the 11024852300 washer manual.

What affects lifespan the most

These are the biggest factors we see that shorten or extend washer life:

• Overloading (stresses the drive system, suspension, and basket)
• Unbalanced loads and a washer that is not level (increases vibration and wear)
• Hard water and heavy detergent use (buildup, poor rinsing, odors)
• Inlet hose age and condition (hoses should be replaced on a schedule)
• Small leaks left unaddressed (can damage bearings, motor area, or flooring)

Typical lifespan expectations (what “normal” looks like)

Usage pattern	Typical lifespan	What usually changes it
Light use (few loads/week)	12 to 15 years	Good leveling, routine cleaning
Average family use	10 to 12 years	Load balance, detergent habits
Heavy use (daily, bulky loads)	7 to 10 years	Overloading, vibration, wear

Signs it may be nearing end of life

If your 11024852300 washer is approaching the 10 to 15 year range, these symptoms often signal major wear:

• Loud grinding, banging, or repeated out-of-balance spinning
• Frequent leaking (even after hose and clamp checks)
• Weak agitation or poor cleaning even with correct cycle settings
• Burning smell, intermittent operation, or failure to start
• Repeated no-drain or no-spin issues that return after basic cleaning

Why it matters

Knowing the expected lifespan helps you decide whether to repair or replace. If the washer is already in the typical end-of-life window, investing in maintenance items (like hoses) can prevent downtime, while major drive or tub repairs may not be as cost-effective.

Last updated: January 2026

Kenmore model 11024852300 does not have a single, reliable “cubic feet” tub-capacity value we can confirm from the model-specific information available in the 11024852300 washer user manual. This washer is instead described by load-size categories (such as extra large or super capacity) rather than a published cubic-foot number.

What we can confirm for model 11024852300

The 11024852300 washer user manual focuses on recommended full-sized loads and load size selector settings, not a cubic-foot specification. That means the best model-specific way to judge capacity is by the load-size guidance and how freely items move during agitation.

Practical capacity tips (works well for this model)

• Load items loosely; do not pack the basket.
• Mix large and small items to keep the load balanced.
• Choose the highest LOAD SIZE setting only for true full loads.
• If clothes are not moving freely, reduce the load size.
• For bulky items (comforters, blankets), wash one at a time when needed.

If you need a cubic-feet estimate (general guidance)

Across many Kenmore “110” top-load designs, capacity is often discussed online in the low-to-mid 3 cu. ft. range, but that varies by sub-model and basket design. For 11024852300, we recommend using the manual’s load guidance as the most accurate way to size loads.

Quick comparison: “cubic feet” vs what you actually use

What you’re trying to decide	Best reference for 11024852300	Why
How much laundry fits	Load-size selector + load examples	Matches how the washer was designed to be used
Whether a comforter will fit	Basket space and free movement	Prevents poor cleaning and out-of-balance spin
Overloading risk	Clothes movement during agitation	Overloading causes poor cleaning and strain

Why it matters

Overloading a top-load washer can lead to poor cleaning, tangling, out-of-balance spinning, and extra wear on drive components like the motor coupling and gearcase.

Last updated: January 2026

Kenmore model 11024852300 is part of the Kenmore 110 model series, which is widely associated with Whirlpool-built washers (Kenmore is a brand label, and the actual manufacturer can vary by model series and production run). For operating and identification details specific to your washer, use the 11024852300 washer manual.

How we identify the maker for Kenmore 110-series washers

Kenmore does not manufacture appliances; it sources them from major manufacturers. For many years, the 110 prefix has commonly been tied to Whirlpool production.

To confirm what you have on your specific unit, check:

• The model and serial tag under the washer lid (noted in the manual)
• Any manufacturer code or factory information printed on the tag
• The parts used on the platform (many Kenmore 110 designs share Whirlpool-style components)

What this means for parts and repairs

Even when a Kenmore washer is Whirlpool-built, you should still match parts by the full model number to ensure fit.

Common examples of platform-style parts you may see for this model include:

• Washer lid switch WP3949238 (prevents spin/agitation with the lid open)
• Washer motor coupling 285753A (connects the motor to the drive system)
• Washer drain pump WP3363394 (moves water out during drain/spin)

Quick reference

Kenmore identifier	What it usually indicates	What to do next
11024852300	Kenmore 110-series washer platform	Use the full model number for parts matching
“110” prefix	Commonly Whirlpool-associated sourcing	Verify on the model/serial label

Why it matters

Knowing who built the washer helps when you are comparing repair procedures, diagnosing symptoms (like no spin or no drain), and choosing compatible replacement parts. The safest approach is always to use 11024852300 when selecting parts and following service steps.

Last updated: January 2026

To reset your Kenmore top-load washer model 11024852300, do a basic power reset: turn the cycle knob to OFF, unplug the washer for 5 minutes, then plug it back in and start a cycle. Operating steps are shown in the 11024852300 washer user manual.

Power reset steps for model 11024852300

• Push in the Cycle Control knob to stop the washer.
• Turn the Cycle Control knob to OFF.
• Unplug the power cord from the outlet.
• Wait 5 minutes.
• Plug the washer back in.
• Close the lid, select a cycle, then pull the Cycle Control knob out to start.

If it still will not start after the reset

On model 11024852300, the manual troubleshooting points to basic checks first, then the lid safety circuit if the washer will not agitate or spin with the lid closed.

• Verify the outlet has power (test with another device).
• Make sure the cycle pointer is aligned with a cycle; turn slightly clockwise and pull to start.
• Confirm the lid is fully closed.
• Confirm both hot and cold water faucets are on and inlet hoses are not kinked.
• If the washer will not agitate or spin with the lid closed, the lid switch is a common failure point; the compatible replacement for this model is the washer lid switch WP3949238.

What a reset helps vs. what it will not fix

Item	Power reset can help	Power reset will not fix
Control/timer behavior	Temporary hang-ups after a power interruption	A worn timer, broken wiring, or failed switch
Safety interlocks	Clears a false stop condition	A failed lid switch or lid not closing

Why it matters

A power reset is the safest first step because it can clear a temporary stop condition quickly; if symptoms remain, it helps narrow the problem to power, water fill, or the lid safety circuit.

Last updated: January 2026