Kenmore Elite 79575192401 refrigerator Parts

A Kenmore Elite refrigerator like model 79575192401 typically lasts 10 to 15 years. Regular maintenance (especially cleaning condenser coils and keeping door gaskets sealing tightly) helps it reach the higher end of that range and reduces the chance of costly sealed-system repairs.

Typical lifespan and what affects it

Most bottom-mount refrigerators fall into a similar life expectancy range, but real-world lifespan depends heavily on operating conditions and upkeep.

• Condenser coil cleanliness (dust buildup makes the compressor work harder)
• Door gasket condition (air leaks cause longer run times and temperature swings)
• Room temperature and ventilation (tight cabinets and hot garages shorten life)
• Water/ice system health (leaks and low water flow can create recurring issues)
• Defrost performance (ice buildup can reduce airflow and cooling)

Maintenance that extends life (high impact)

These are the same care items we see most often tied to longer-lasting Kenmore Elite refrigerators.

Maintenance task	How often	What it prevents
Clean condenser coils	Every 6 to 12 months	Overheating, compressor strain
Inspect/clean door gaskets	Every 3 to 6 months	Warm air leaks, frost, long run times
Keep vents clear inside compartments	Ongoing	Uneven temps, poor airflow
Replace water filter on schedule	As directed	Low flow, taste/odor issues

For model-specific care and cleaning steps, use the owner's manual.

Signs your refrigerator is nearing end-of-life

A single symptom does not always mean replacement, but multiple issues at once usually signal a unit that is wearing out.

• Compressor runs almost constantly
• Freezer stays cold but fresh-food section warms up (airflow or damper issues)
• Repeated frost buildup on the evaporator cover
• Water leaks or recurring dispenser/ice maker problems
• Temperature swings that spoil food

Why it matters

Knowing the typical 10 to 15 year lifespan helps you decide when a repair is worth it. For example, if cooling problems trace back to airflow or defrost components, repairs are often more practical than replacing the refrigerator.

Last updated: February 2026

For Kenmore Elite refrigerator model 79575192401, the model number by itself usually does not state the exact cubic-foot capacity. The most reliable way is to look up the capacity in the specifications section of the owner's manual, or calculate it from the interior compartment measurements.

Fast ways to find capacity

• Check the specifications/features section in the owner's manual for listed capacity (when provided).
• Look for a tech/spec label inside the fresh food compartment (often on a side wall near the crispers or ceiling area).
• If you have interior dimensions, calculate approximate cubic feet (see formula below).
• Use the model number to match the correct documentation and parts list for your exact unit (79575192401).

How to calculate cubic feet (approximate)

Measure the usable interior of each compartment (fresh food and freezer) in inches, then add them together.

Formula:

• Cubic feet = (Height × Width × Depth) ÷ 1728

What to measure (for best accuracy)

• Measure inside wall to inside wall (not the outside cabinet).
• Measure depth to the point where shelves/bins actually allow storage.
• Calculate fresh food and freezer separately, then add.

Typical capacity ranges (for context)

Kenmore bottom-mount refrigerators in the 795 series commonly fall into a mid-to-large capacity range. Use this only as a reasonableness check, not as a spec.

Refrigerator style	Typical total capacity range
Bottom-mount (bottom freezer)	~18 to 26 cu. ft.
Large bottom-mount / French door style	~22 to 30 cu. ft.

Why it matters

Capacity helps you compare models, choose replacement storage parts (bins, shelves), and set expectations for airflow and loading. Overpacking can reduce proper air circulation and cooling performance.

Last updated: February 2026

To identify your Kenmore refrigerator model, look for the model and serial number label inside the fresh food (refrigerator) compartment. For Kenmore Elite model 79575192401, the label is typically on the right-hand side wall of the refrigerator compartment; confirm the exact location and format in the owner's manual.

Where to look on a Kenmore bottom-mount refrigerator

Check these common spots first (use a flashlight and wipe away any condensation):

• Right-hand side wall inside the refrigerator compartment (most common for this style)
• Upper side wall or near the ceiling of the fresh food section
• Behind or beside the crisper drawers (you may need to slide drawers out)
• Along the door liner edge (less common)
• Near the base cover area (some models place labels lower)

What the model number looks like (and why it matters)

Kenmore model numbers are usually a series of numbers and may include punctuation on some labels. For this Kenmore Elite bottom-mount family, you may see a format similar to 795.755xxxxx on the label or in documentation.

Quick check table

What you see	What it means	What to do next
A number starting with 795	Kenmore Elite refrigerator model family	Use the full model number to match parts and diagrams
Model and serial on the same label	Normal	Write both down before ordering parts
Label is hard to read	Common with age/cleaning	Take a photo and zoom in to capture every digit

Tips to avoid ordering the wrong part

Once you find the model number, match it exactly (every digit matters) before choosing parts like a door switch, gasket, or water inlet valve.

• Copy the model number exactly as printed (include any dots if shown)
• Use the model number to cross-check part fitment
• Keep the serial number for service history and production details
• If you are troubleshooting, note symptoms (no cooling, no ice, leaks) before selecting parts

Why it matters

Kenmore used multiple manufacturers across different model series; the model number is the fastest way to get the correct diagrams, compatible parts, and repair instructions for your exact refrigerator.

Last updated: February 2026

On Kenmore Elite model 79575192401, dH (or Er dH) indicates a defrost heater problem. The refrigerator is not sensing normal defrost heating, so frost can build up on the evaporator and restrict airflow, leading to warm temperatures in the fresh food section or freezer.

What to check first (fast, no tools)

• Unplug the refrigerator for 5 minutes, then restore power and see if the code returns.
• Confirm the doors close fully and the gaskets seal; air leaks increase frost.
• Set temperatures to typical starting points (about 37°F fresh food and 0°F freezer) and allow 24 hours to stabilize.
• Make sure food packages are not blocking interior air vents.
• Listen for the evaporator fan; weak airflow often shows up when frost is heavy.

Likely causes and related parts

A dH code is usually tied to the defrost circuit: heater, sensor, wiring, or control.

Symptom you notice	Most likely area	Example part for this model
Heavy frost on rear freezer panel	Defrost heater or sensor	Lg refrigerator defrost heater 5300JK1005D or refrigerator defrost sensor assembly 6615JB2005H
Temps drift warmer over days	Defrost system not clearing frost	Defrost heater, sensor, or wiring
Code returns quickly after reset	Electrical issue in defrost circuit	Heater, sensor, harness, or control

Basic diagnostic path (what we do in the field)

1. Unplug power and remove the freezer rear interior panel to inspect for heavy frost.
2. If the coil is iced over, defrost with a hair dryer (keep heat moving; do not overheat plastic).
3. Check the defrost heater and defrost sensor connections for looseness or corrosion.
4. If the code persists, test the heater and sensor with a meter and confirm the control is sending power during defrost (procedures and access points are outlined in the owner's manual).

Why it matters

When the defrost heater system is not working, frost blocks airflow. That reduces cooling performance, increases run time, and can cause food to spoil even though the compressor is running.

Last updated: February 2026

Common problems on the Kenmore Elite 79575192401 bottom-mount refrigerator are weak or uneven cooling, ice maker slow production, water leaks, door sealing issues, and normal-to-concerning noises. Many issues trace back to airflow (blocked vents or dirty coils), defrost system faults, or water supply components; our owner's manual troubleshooting steps help pinpoint the cause.

Most common symptoms and what usually causes them

• Refrigerator or freezer too warm: doors opened often, warm room, blocked air vents, control settings off (adjust, then wait 24 hours between changes).
• Ice maker slow or cubes too small: freezer not cold enough yet, door left open, restricted water supply, heavy usage.
• Water leaks or puddles: loose or damaged water line connections, tubing issues, inlet valve problems, or defrost drain issues.
• Noisy operation: fan airflow sounds, defrost sizzling, water running to the drain pan (often normal); rattling can be leveling or floor support.
• Door hard to open: dirty or sticky gaskets, or a temporary vacuum right after closing.

Quick checks we recommend first (fast, no parts)

1. Confirm the unit has power and is not in a defrost cycle (wait about 30 minutes if it just stopped).
2. Make sure air vents inside are not blocked by food packages.
3. Adjust temperature controls in small steps; wait 24 hours before judging results.
4. Clean door gaskets; if doors are hard to reopen, wait 5 minutes for pressure to equalize.
5. Clean condenser coils (dust buildup commonly causes poor cooling and longer run times).

Parts that commonly relate to these problems

If your checks point to a component issue, these model-matched parts are often involved:

Symptom	Common part area	Example model-matched part
Lights do not work or door-related behavior	Door switch	Refrigerator door push-button switch 6600JB1010A
Frost buildup, warm temps, or defrost trouble	Defrost sensing/heating	Refrigerator defrost sensor assembly 6615JB2005H and lg refrigerator defrost heater 5300JK1005D
Water dispenser/ice maker water issues	Water supply/inlet	Refrigerator water inlet valve 5221JB2006K
Door not sealing, moisture, temp swings	Door gasket	Refrigerator gasket assembly MDS64172919

Why it matters

Cooling and ice maker complaints on the 79575192401 are often airflow or defrost related; fixing those early prevents food temperature swings, excess frost, and unnecessary compressor run time.

Helpful DIY reference

For display or diagnostic codes on Kenmore 795 bottom-freezer models, use Kenmore 795 model bottom freezer refrigerator error codes.

Last updated: February 2026