Whirlpool GS6SHAXMB00 side-by-side refrigerator Parts

The Whirlpool GS6SHAXMB00 side-by-side refrigerator is typically in the 25 cu. ft. class (about 25.4 cu. ft. total capacity). For the exact capacity listing tied to your unit’s configuration, confirm it in the GS6SHAXMB00 owner's manual.

How to confirm the exact capacity for your refrigerator

Capacity can vary slightly by configuration and how manufacturers report usable space. The most reliable places to verify are:

• The specifications section in the GS6SHAXMB00 owner's manual
• The model and serial tag inside the fresh food compartment
• The product data sheet section (often included in the manual PDF)

What “cubic feet” means (and what it does not)

“Cubic feet” is the total interior volume rating. It does not tell you exactly how much food fits once shelves, bins, the ice bucket, and the water filter housing take up space.

Quick reference: capacity vs. what you can expect

Total capacity class	Typical use case	What you’ll notice
22 to 24 cu. ft.	Smaller households	Less freezer bin space
25 to 26 cu. ft.	Most families	Balanced fridge and freezer storage
27+ cu. ft.	Heavy grocery loads	More door bin and shelf flexibility

Why it matters

Knowing the capacity helps when you are comparing replacement refrigerators, planning kitchen space, and choosing storage accessories (bins, ice container size, and shelf layout). It also helps set realistic expectations for freezer space if the ice maker is installed.

Last updated: January 2026

Most 24.5 cu. ft. refrigerators are built in the “full-size” class and typically measure about 33 to 36 inches wide. For your Whirlpool GS6SHAXMB00 side-by-side refrigerator, we recommend confirming the exact cabinet width and required clearances in the GS6SHAXMB00 owner's manual.

Typical width ranges you’ll see

Capacity alone does not lock in one width; door style and depth matter most.

• Standard-depth side-by-side: commonly 35 to 36 inches wide
• Standard-depth French door: commonly 35 to 36 inches wide
• Counter-depth designs: often 32 to 34 inches wide (varies by brand and layout)
• “33-inch class” models: can still reach 24 to 25 cu. ft. with different interior layouts

Don’t forget installation clearance (it affects the real space you need)

Even if the cabinet is 33 to 36 inches wide, you need extra room for airflow and door swing. The Whirlpool GS6SHAXMB00 manual calls out these common clearance guidelines:

• Allow about 1/2 inch on each side and at the top for ventilation
• If installed next to a fixed wall, allow about 2 inches minimum on the hinge side so the door can swing open
• Leave extra space at the back if you have an ice maker and water line connection

Quick sizing guide (width vs. what it usually means)

Advertised class	Typical actual width	Best for
36-inch refrigerator	~35.5 to 36 inches	Most standard-depth kitchens
33-inch refrigerator	~32.5 to 33.5 inches	Tighter openings, some counter-depth
Counter-depth (varies)	~32 to 34 inches	Flush look with cabinets

Why it matters

A refrigerator that is “almost” the right width can still bind against cabinets, fail to open fully near a wall, or run warmer if airflow is restricted. Measuring the opening and following the manual’s clearance guidance prevents fit and performance problems.

Last updated: January 2026

On the Whirlpool GS6SHAXMB00 side-by-side refrigerator, the water filter is located in the base grille at the bottom front of the unit. You access it from the front by opening the grille area and removing the filter cartridge as described in the GS6SHAXMB00 owner's manual.

How to find and remove the base grille water filter

Most GS6SHAXMB00 units use a base grille (toe-kick) filter that releases when you lift or unlatch the filter cover.

• Look at the bottom front of the refrigerator for the base grille.
• Locate the round or capsule-style filter cartridge behind the grille.
• Use the “lift up to remove” tab or cover (if your grille has one).
• Pull the filter straight out once it releases.
• Install the new filter by pushing it in firmly until it seats.
• Reset the filter status light (if your model has one).

Resetting the water filter light (common styles)

The manual describes two common reset methods used on this platform.

Reset style	What you do	Where you do it
Style 1	Press the light switch 5 times within 10 seconds	Refrigerator compartment light switch
Style 2	Press and hold the water filter reset button until the status light turns green	Dispenser area or control panel

If your refrigerator does not have a filter indicator light, we replace the filter every 6 to 9 months, or sooner if water flow drops.

If the filter is hard to remove or water flow is weak

A stuck filter or slow dispenser flow is usually caused by pressure, a clogged cartridge, or an installation issue.

• Dispense water for a few seconds to relieve pressure, then try again.
• Make sure the cartridge is fully seated and aligned.
• Check for kinks in the home water line behind the refrigerator.
• Confirm the shutoff valve is fully open.
• If you’re troubleshooting repeated dispenser or ice maker issues, use how to prevent water dispenser and ice maker problems.

Why it matters

A correctly installed, regularly changed water filter helps maintain normal water flow to the dispenser and ice maker, and it reduces the chance of air in the lines and leaking at the dispenser.

Last updated: January 2026