Kenmore Elite 11078082701 dryer Parts

On Kenmore Elite dryer model 11078082701, the model number is on the model and serial rating plate in the door well (the door opening area). Open the dryer door and look along the cabinet frame around the opening for the label.

• Open the door and inspect the door well label area (most common)
• Check the inside door frame near the top or bottom
• Look along the front cabinet opening where the door closes
• If the label is hard to see, use a flashlight and wipe dust off the surface

The rating plate typically includes:

• Model number (for example, 11078082701)
• Serial number
• Gas type and other safety or specification information

We use the exact model number to match the correct Kenmore parts (like a thermal fuse, drum belt, or igniter) and to pull the right diagrams and troubleshooting steps from the 11078082701 owner's manual.

Last updated: January 2026

A Kenmore Elite dryer typically lasts about 15 years. With consistent maintenance on model 11078082701 (especially lint removal and proper venting), many owners get a full lifespan and avoid common failures tied to overheating and restricted airflow.

Most dryers reach their expected life when they have good airflow and are not routinely overloaded.

• Average life expectancy: about 15 years
• Heavy use (large families, daily loads) shortens life
• Overloading strains the drum belt, idler, and motor
• Poor venting increases heat stress on thermostats and fuses
• Skipped lint cleaning raises drying times and wear

Your 11078082701 owner's manual calls out key care items that directly impact longevity, including cleaning the lint screen before each load and removing accumulated lint from the venting and inside the cabinet on a regular schedule.

• Clean the lint screen before every load
• Check outside exhaust airflow; weak airflow means the vent needs cleaning
• Use 4-inch venting and avoid plastic or foil-style vent material
• Remove lint buildup from the exhaust vent about every 2 years (more often with heavy use)
• Have lint removed from inside the dryer cabinet about every 2 years by a qualified person

A dryer that runs hot or runs long wears out parts faster. Good airflow helps protect components like the thermal fuse and thermistor, and it keeps cycles consistent so the motor and drum drive system are not overworked.

Last updated: January 2026

To reset your Kenmore Elite dryer model 11078082701, we recommend a simple power reset: unplug the dryer (or switch off the breaker) for about 1 minute, then restore power and start a new cycle. If you need to clear a running cycle, use the STOP button sequence described in the 11078082701 owner's manual.

• Power reset: Unplug for 1 minute, plug back in, then press POWER and select a cycle.
• Cancel a cycle in progress: Press STOP twice to cancel the cycle.
• Pause and resume: Open the door or press STOP once to pause; close the door and press START to resume.
• Restart after a long pause: If the cycle is interrupted for more than about 5 minutes, select the cycle settings again before pressing START.

A dryer that repeatedly stops can be reacting to airflow or heat issues. Start with these basics:

• Clean the lint screen before every load.
• Check the exhaust vent for kinks, crushing, or heavy lint buildup.
• Avoid overloading; large loads can extend dry time and increase heat.
• Confirm the door closes firmly and the latch engages.
• If you suspect overheating symptoms, consider checking the dryer thermal fuse WP3390719 as part of troubleshooting.

A proper reset clears a stuck cycle state and gets the control ready for a fresh start. If the dryer keeps stopping after resets, airflow restrictions and overheating protection are common causes, so venting and safety devices are the next place to focus.

Last updated: January 2026

The exact cubic-foot capacity for Kenmore Elite dryer model 11078082701 is typically listed on the model/serial label or in the specifications section of the documentation; for most Kenmore 110-series full-size dryers, capacity commonly falls in the 6.5 to 7.5 cu. ft. range. Use the 11078082701 owner's manual to confirm the published spec for your unit.

• Check the model/serial label (often inside the door opening or on the cabinet frame).
• Look for a “Capacity” or “Drum volume” line in the specs section.
• If the manual lists multiple models (for example, 110.7708_ and 110.7709_), match your full model number exactly.
• If you only see dimensions, the manual spec is still the best source for cubic feet.

Most Kenmore Elite gas dryers in this platform are “full-size” units designed for large loads. If you are comparing dryers or planning laundry loads, these ranges are practical:

Capacity affects drying performance and cycle results. Overloading a drum reduces airflow, increases dry time, and can contribute to overheating conditions that may trip safety devices like a thermal fuse.

Good airflow helps any capacity dryer dry faster. Clean the lint screen every load and periodically remove accumulated lint as outlined in the 11078082701 owner's manual.

Last updated: January 2026