LG LRSC26912SW refrigerator Parts

On the LG LRSC26912SW side-by-side refrigerator, set the temperature by pressing the Refrigerator or Freezer temperature button to cycle through the available levels; each press changes one step. Change only one increment at a time, then wait 24 hours for temperatures to stabilize (see the LRSC26912SW owner's manual).

When you press a temperature button, the setting repeats in a loop:

• Middle
• Middle strong
• Strong
• Weak
• Middle weak

Because the display shows a target setting (not the exact air temperature), food load and door openings can make the actual temperature vary.

We recommend these steps for steady, safe cooling:

• Let the refrigerator run 2 to 3 days after setup or a major change before fine-tuning.
• Adjust one step (not multiple steps at once).
• Wait a full 24 hours before deciding if you need another change.
• Keep doors closed as much as possible while stabilizing.
• Avoid blocking air vents with large containers.

Small temperature changes have a big impact on food quality, ice production, and run time. Stepping the control gradually helps the LRSC26912SW reach a stable temperature without overcorrecting.

Last updated: February 2026

We do not recommend laying the LG LRSC26912SW refrigerator on its side. Transporting it upright helps protect internal components and keeps compressor oil where it belongs; laying it down can lead to cooling problems and physical damage to shelves, drawers, and the cabinet.

• Keep the refrigerator upright whenever possible.
• Remove or secure loose items (bins, shelves, ice bin) so they do not shift.
• Protect the doors and handles from impact; tape doors shut if needed.
• Avoid putting weight on the dispenser area or door fronts.
• Review handling and component removal steps in the LRSC26912SW owner's manual.

If the refrigerator was transported on its side, set it upright before plugging it in so fluids can settle back where they should.

• Stand it upright in its final location.
• Wait before restoring power (a longer wait is better if it was on its side for a long time).
• Plug in and confirm normal cooling and normal fan/compressor sound.
• Check for dispenser or ice maker issues after startup.

Side-by-side refrigerators like the LG LRSC26912SW are built to be supported on their base. Laying the unit down can stress the cabinet and door alignment, and it can also contribute to cooling issues if compressor oil migrates into the sealed system.

Last updated: February 2026

The price of an LG side-by-side refrigerator varies widely by size, finish, and features; for an older model like LG LRSC26912SW, the most accurate “price” is usually the cost of the replacement parts you need rather than a current new-unit retail price. For model-specific details, use the LRSC26912SW owner's manual.

If you are repairing an LRSC26912SW, these are common part costs that help you estimate your total repair budget (part price plus labor if you hire service):

• Water filtration: refrigerator water filter 5231JA2006A
• Water supply to dispenser and ice maker: LG refrigerator water inlet valve 5221JA2006D
• Ice production: refrigerator ice maker 5988JA1001H
• Door sealing (energy loss, frost, sweating): freezer door gasket (part ID ADX73270508)
• Door alignment and closing: refrigerator door hinge (part ID 4775JA2113A)

Because LRSC26912SW is an older LG side-by-side platform, pricing usually falls into these buckets:

• Identify the symptom (no ice, no water, warm temps, leaking).
• Match it to the most likely system (water filter, inlet valve, ice maker, fan, door seal).
• Add parts cost plus 1 to 2 hours typical labor for many dispenser and ice maker repairs.
• If cooling is weak, include diagnostic time; airflow and fan issues can mimic sealed-system problems.

Side-by-side refrigerator pricing is feature-driven, but repair decisions are cost-driven. Knowing the price of high-impact parts like the water filter, inlet valve, and ice maker helps you decide whether to repair your LRSC26912SW or replace the unit.

Last updated: February 2026