Owner’s manual
Error Codes
What is the capacity of the ED5VHEXTL01?
The Whirlpool ED5VHEXTL01 side-by-side refrigerator has a total capacity of about 25.2 cu. ft. Use this number for shopping and space planning; for the exact breakdown between fresh food and freezer sections, check the ED5VHEXTL01 owner's manual.
Capacity can vary slightly by configuration and how the manufacturer lists usable space. We recommend verifying the spec in the manual for your model.
- Look for a section labeled Specifications or Product data
- Confirm it lists ED5VHEXTL01 (exact model match)
- Note whether it shows total, refrigerator, and freezer capacities
- If you are comparing models, compare total cu. ft. and shelf/bin layout together
Most 25 cu. ft. Whirlpool side-by-side refrigerators split capacity with more space on the fresh food side than the freezer side.
| Spec | What it means | What you use it for |
|---|---|---|
| Total capacity | Combined refrigerator + freezer volume | Comparing overall size |
| Refrigerator capacity | Fresh food section volume | Grocery storage planning |
| Freezer capacity | Freezer section volume | Frozen food storage planning |
Capacity affects how much food you can store, but day-to-day usability also depends on shelf spacing, door bins, and features like the ice maker and water filter housing.
Last updated: February 2026
What is the E5 code on a Whirlpool ice maker?
On a Whirlpool refrigerator like model ED5VHEXTL01, an E5 code on the ice maker typically points to a temperature-related problem (the ice maker is not seeing the temperatures it expects), often tied to cooling airflow, freezer temperature, or a sensor reading that is out of range. For model-specific checks and test steps, use the ED5VHEXTL01 owner's manual.
In most Whirlpool ice maker systems, E5 shows up when the ice maker control detects a temperature condition that prevents normal harvest or fill. Start with the basics that most often cause the code:
- Confirm the freezer is holding 0°F to 5°F (ice makers commonly stop or error when temps rise).
- Make sure the ice bin is seated correctly and not overpacked with clumped ice.
- Check for blocked vents or frost buildup that can reduce airflow to the ice maker area.
- Power reset: unplug the refrigerator (or turn off the breaker) for 5 minutes, then restore power.
- If the dispenser water flow is weak, address water supply issues before blaming the ice maker.
| What you notice | Most likely cause | What we recommend |
|---|---|---|
| No ice and freezer feels “not quite cold” | Freezer temp too warm | Set freezer colder; allow 24 hours; verify door seals close fully |
| Ice is small/hollow or production is slow | Water supply restriction or filter restriction | Replace the refrigerator water filter EDR3RXD1 and purge air from the line |
| Ice maker stopped after a thaw/frost event | Airflow blocked by frost | Clear vents; check for heavy frost that suggests a defrost issue |
| E5 returns after reset | Ongoing temp/sensor/control issue | Inspect cooling performance; consider ice maker or control diagnostics |
E5 is often temperature-driven, but these parts are frequently involved in the same complaint:
- Refrigerator ice maker WPW10190965 (ice maker module/control issues)
- Refrigerator inlet valve W10408179 (no fill or weak fill)
- Refrigerator water filter EDR3RXD1 (restricted flow)
- Refrigerator defrost bi-metal WPW10225581 (defrost problems that lead to frost and airflow loss)
When the ice maker cannot confirm proper freezing conditions, it can pause production to prevent jams, overflow, or poor-quality ice. Fixing the underlying cooling or water-flow issue usually clears the E5 condition and restores normal ice cycles.
Last updated: February 2026
How wide is a 24.5 cu ft refrigerator?
A 24.5 cu ft refrigerator is typically a 36-inch class unit; for your Whirlpool ED5VHEXTL01 side-by-side refrigerator, the cabinet width is 35-5/8 inches. Use the ED5VHEXTL01 owner's manual to confirm the full exterior dimensions and required clearances for doors and airflow.
Even when the cabinet is 35-5/8 inches wide, the space you need is usually larger.
- Plan for a 36-inch cabinet opening for most side-by-side refrigerators
- Allow extra clearance on the hinge side for full door swing
- Account for handles and door thickness (they affect overall depth more than width)
- Leave room behind the unit for the power cord and water line
- Keep ventilation space so the condenser can shed heat properly
| Measurement | What it means | Typical planning rule |
|---|---|---|
| Cabinet width | The refrigerator box width | ED5VHEXTL01 is 35-5/8 inches |
| Opening width | The cutout between cabinets | 36 inches or per manual clearance |
| Door swing clearance | Space needed to open doors fully | More space on hinge side |
- Measure the opening width at the front and back (cabinets can be out of square)
- Measure height to the lowest cabinet or soffit point
- Measure depth to the counter front, then consider door and handle projection
- Check that the unit can pass through doorways and tight turns
A refrigerator can match the “36-inch class” but still not fit correctly if door swing, handles, or ventilation clearance are ignored; correct spacing helps prevent rubbing doors and supports consistent cooling.
Last updated: February 2026
