Maytag MSD2641KES refrigerator Parts

Most Maytag refrigerators fall into standard full-size dimensions; for a side-by-side like model MSD2641KES, plan on a cabinet opening that fits a typical 30 to 36 inch width and roughly 62 to 72 inch height range, then confirm the exact cutout and clearance requirements in the MSD2641KES owner's manual.

Typical size ranges you can plan around

These ranges help with delivery paths, cabinet openings, and door swing planning for a Maytag side-by-side refrigerator.

• Width: commonly 30, 33, or 36 inches
• Height: commonly about 62 to 72 inches
• Depth: commonly about 29 to 36 inches (varies with handles and door style)
• Top clearance: allow about 1/2 inch for air circulation
• Rear clearance: allow about 1 inch behind the machine compartment cover for air circulation

Installation clearances and placement rules (model MSD2641KES)

Our guidance for MSD2641KES is to follow the manual’s placement limits so the refrigerator cools correctly and the doors open fully.

• Install indoors only
• Avoid placing it near heat sources (oven, radiator, etc.)
• Do not install where ambient temperature drops below 55°F (13°C) or rises above 110°F (43°C)
• If the hinge side is against a wall, allow extra space so the door can open wider
• Floor coverings (carpet, tile, rugs) can reduce the usable opening; leveling can sometimes regain clearance

Quick planning table (what to measure)

What you are measuring	What to include	Why it matters
Cabinet opening width	Wall-to-wall at the tightest point	Prevents binding during install
Cabinet opening height	Floor to cabinet top or soffit	Ensures the unit fits upright
Depth to front edge	Wall to cabinet face	Avoids doors/handles sticking out too far
Door swing clearance	Hinge side to adjacent wall	Lets doors open fully for drawers and bins

Why it matters

Correct sizing prevents airflow restrictions (which can cause poor cooling), avoids door swing problems, and reduces the risk of damage during delivery and installation.

If you are ordering repair parts while you plan your setup, you can also find model-matched components for MSD2641KES on the parts list for this model, or search by model number on Sears PartsDirect.

Last updated: February 2026

Maytag refrigerators are made by Whirlpool Corporation today; Maytag is a Whirlpool brand. For your Maytag MSD2641KES side-by-side refrigerator, we use the model’s parts diagrams and the owner's manual to match the correct replacement parts.

What this means for parts and repairs

When you’re troubleshooting cooling, ice maker, or dispenser issues on a Maytag refrigerator, you’ll often see Whirlpool-style part numbering and components.

Common examples for MSD2641KES include:

• Ice production parts such as the refrigerator ice maker D7824706Q
• Cooling airflow parts such as the evaporator fan motor and blade
• Water system parts such as the inlet valve and filter head
• Electrical start components such as the start device

Quick parts examples for MSD2641KES

These are model-matched parts that commonly come up in DIY diagnosis:

Symptom	Likely system	Example part on this model
No ice	Ice maker system	Refrigerator ice maker
Warm refrigerator section	Evaporator airflow	Evaporator motor
No water at dispenser	Water supply/valve	Water inlet valve assembly
Clicking, won’t start cooling	Compressor start circuit	Refrigerator start device

Why it matters

Knowing Maytag is a Whirlpool brand helps you troubleshoot more efficiently because many designs, test steps, and replacement parts follow Whirlpool-family conventions. It also helps ensure you order the correct part by matching your exact model number.

Ordering the right part

We recommend matching parts by the full model number MSD2641KES and the part ID shown in the parts list. You can also search by model number on Sears PartsDirect if you’re shopping for additional Maytag refrigerator parts.

Last updated: February 2026

Most Maytag refrigerators, including the Maytag MSD2641KES side-by-side, last 10 to 15 years with normal use. With consistent maintenance (clean airflow paths, good door sealing, and prompt repairs), it’s common to reach the upper end of that range and beyond; the compressor and cooling system condition usually decides the outcome.

Typical lifespan and what usually ends a refrigerator’s life

Refrigerators typically fail from cooling-system wear, airflow problems, or water and ice system leaks that go unchecked.

Component or issue area	What you may notice	Common fix type
Compressor start/cooling	Warm fridge/freezer, clicking, won’t start	Electrical start parts or sealed-system service
Evaporator airflow	Warm fresh food, freezer OK, noisy fan	Fan blade or motor replacement
Defrost system	Frost buildup, weak airflow, warming	Defrost heater or controls
Door sealing	Moisture, frost, long run times	Gasket adjustment or replacement

Maintenance that adds years (and saves energy)

We recommend these habits for the MSD2641KES:

• Keep condenser area clean and unobstructed so heat can leave the cabinet.
• Confirm doors close and seal fully; a leaking gasket forces longer run times.
• Keep vents inside the refrigerator and freezer clear of food packages.
• Replace water filters on schedule; the manual notes “Order” and “Replace” indicator timing and reset steps (see the MSD2641KES owner’s manual).
• Address new noises early; a failing fan motor or blade can reduce cooling fast.

Parts that commonly affect lifespan on this model

If performance drops, these model-matched parts are often involved:

• Refrigerator start device W10613606 (helps the compressor start and run)
• Evaporator motor WPW10128551 and refrigerator evaporator fan blade WP2169142 (move cold air through the compartments)
• Refrigerator defrost heater WP67004188 (prevents heavy frost that blocks airflow)
• Refrigerator door gasket W10840101 (keeps warm, humid air out)

Why it matters

A refrigerator can still “run” while slowly losing efficiency. Catching airflow, sealing, and defrost issues early reduces compressor run time, helps food stay at safe temperatures, and prevents expensive cooling-system damage.

If you need to order replacement parts for your MSD2641KES, use the parts list for this model or search by model number on Sears PartsDirect.

Last updated: February 2026