Maytag MSD2572VES02 refrigerator Parts

Maytag refrigerators like model MSD2572VES02 do not use one universal reset button. Resets are typically done by power-cycling the refrigerator or by using a specific control sequence for the feature you are resetting (such as the water filter status light). See the MSD2572VES02 owner's manual for the exact steps for your control panel.

Quick ways we reset common Maytag fridge functions

• Control board glitch (general reset): Unplug the refrigerator (or turn off the breaker) for 5 minutes, then restore power.
• After installation or big temperature changes: Allow 24 hours for temperatures to stabilize after power is restored.
• Water system after a filter change: Flush the water system after replacing the filter (this helps clear air and improves flow).
• Filter status light: Use the model-specific filter reset steps in the manual.
• Ice maker issues: Confirm the ice maker is turned on and the freezer is cold enough; then power-cycle if needed.

Water filter reset and flush (most common “reset” request)

On MSD2572VES02, many “reset” questions are really about the filter indicator or water flow after a filter change.

What you’re trying to fix	What to do	What to expect
Filter light stays on	Follow the filter status reset steps in the manual	Light clears after the correct button sequence
Low water flow after filter change	Flush the dispenser for several minutes total	Air clears, flow becomes steadier
Water tastes odd after filter change	Flush, then discard the first glass	Taste improves as new filter is rinsed

If you’re replacing the filter itself, use the correct cartridge for this model, such as the refrigerator water filter EDR3RXD1. You can order model-matched parts from the parts list for MSD2572VES02, or search by model on Sears PartsDirect.

Why it matters

Using the right reset method prevents unnecessary part replacements. A simple power-cycle can clear a temporary control issue, while a filter reset and flush restores normal dispenser performance after maintenance.

Last updated: February 2026

The most common issues we see with the Maytag MSD2572VES02 side-by-side refrigerator involve no ice or slow ice production, warm refrigerator or freezer temperatures from airflow/defrost problems, and water dispenser leaks or low flow. These symptoms usually trace back to the ice maker, water filter system, door sealing, or defrost components.

Common problems and what they point to

• No ice or small cubes: clogged filter, low water pressure, failing ice maker
• Warm fridge section but freezer seems OK: evaporator fan or airflow blockage
• Frost buildup on back freezer wall: defrost system issue (heater, thermostat, control)
• Water dispenser slow or not dispensing: restricted filter or housing issue
• Door not closing tightly, moisture or sweating: worn gasket or door closer cam

Quick checks we recommend first

1. Confirm temperature settings and allow 24 hours after changes (see the MSD2572VES02 owner's manual).
2. Replace the water filter if flow is slow or taste is off; a restricted filter can also affect ice production.
3. Inspect door seals for gaps and clean the gasket sealing surface.
4. Look for heavy frost in the freezer; that is a strong sign of a defrost failure.
5. Listen for the evaporator fan; no fan sound often means poor cooling in the fresh-food section.

Parts commonly involved (examples for this model)

Symptom	Common part involved	Example part on this model
No ice / poor ice	Ice maker assembly	Refrigerator ice maker assembly WPW10300022
Slow water / no water	Water filter	Refrigerator water filter EDR3RXD1
Frost buildup	Defrost thermostat or heater	Refrigerator bi-metal thermostat WPW10225581
Door won’t seal/close	Gasket or closer cam	Refrigerator door gasket 2159083

Why it matters

These issues affect food safety, energy use, and compressor run time. Fixing airflow, defrost, and water-flow problems early helps your MSD2572VES02 cool evenly and prevents repeat icing and leaking.

Last updated: March 2026

On the Maytag MSD2572VES02 side-by-side refrigerator, an ice maker typically stops working when the wire shutoff arm is up (OFF), the ice storage bin is not pushed in all the way, water supply is restricted (shutoff valve, low pressure, clogged filter), or ice is jammed in the bin or chute. Use the MSD2572VES02 owner's manual for the exact on/off and bin steps.

Quick checks we recommend first

• Lift the ice maker door and confirm the wire shutoff arm is down (ON); do not force it.
• Remove and reinstall the ice storage bin; push it in all the way or dispensing can fail.
• Confirm the refrigerator is connected to water and the household shutoff valve is fully open.
• Make sure home water pressure is at least 30 psi for proper fill and dispensing.
• Clear any ice jam in the delivery chute using a plastic utensil.

Common symptoms and what to do

Symptom	Likely cause	Next step
No ice at all	Shutoff arm OFF or first-time startup	Set arm to ON; allow 24 hours for first ice
Small cubes or slow ice	Restricted water flow	Replace filter; verify valve open and pressure
Ice in bin but won’t dispense	Bin not seated or chute jam	Reinstall bin fully; clear chute

Parts that often fix “no ice”

If water flow is weak, a fresh filter is a top fix for MSD2572VES02.

• Refrigerator water filter EDR3RXD1
• Refrigerator ice maker assembly WPW10300022

For step-by-step filter replacement, use: how to replace the water filter in a Maytag refrigerator.

Why it matters

The ice maker needs steady water pressure and a clear path for ice movement. A clogged filter or partially closed shutoff valve stops ice production; a mis-seated bin or jammed chute stops dispensing even when ice is being made.

If you need to order additional parts for MSD2572VES02, start with the parts list for your model, or search by model number on Sears PartsDirect.

Last updated: February 2026