CONFIRM THE PART FITS
Part Information
Basic Information
- Part Name: Refrigerator Ice Maker Assembly
- Manufacturer: Whirlpool
- Category: Refrigeration
- Primary Function: This assembly is responsible for producing and dispensing ice in your refrigerator.
Technical Specifications
- Dimensions: Specific dimensions may vary by model, but generally fit within the standard ice maker compartment of compatible refrigerators.
- Power Rating: Typically operates on the refrigerator's standard electrical specifications.
- Material: Made primarily from durable plastic and metal components.
Installation & Compatibility
- Compatible Models: This part replaces model number W10300022 and is compatible with a variety of Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and other refrigerators that were originally equipped with the same or a similar ice maker module.
- Installation Difficulty: Medium—Installation can be performed by a DIY-er with some appliance repair knowledge.
- Tools Required: Common household tools such as a screwdriver and a wrench.
Additional Information
The Refrigerator Ice Maker Assembly WPW10300022 is a complete unit that includes the ice mold and the control device. It is designed to replace a non-functional or poorly functioning ice maker in your refrigerator. Common issues that this part resolves include ice makers that no longer produce ice, produce very small or misshapen ice, or leak water into the ice bin, causing a clump of ice.
Installation typically involves removing the ice maker cover, disconnecting the wiring harness, removing a few screws, and lifting the old unit out. The new unit is then placed into the compartment, screws are re-inserted, and the wiring harness is reconnected. Finally, the cover is replaced, and the refrigerator is restored to power. After installation, it's usually recommended to discard the first few batches of ice to ensure that any impurities from manufacturing are removed.
When replacing your ice maker, it's important to ensure that the refrigerator is unplugged and that water flow to the ice maker has been shut off before beginning the work. Double-check compatibility with your refrigerator model to ensure that the WPW10300022 is the correct replacement part.
Frequently Used Together
- $88.90 |Â6% OFFÂ Phone Price : $94.90
- $46.81 |Â11% OFFÂ Phone Price : $52.81
- $145.00 |Â8% OFFÂ Phone Price : $157.00
- $86.75 |Â6% OFFÂ Phone Price : $92.75
- $200.53 |Â6% OFFÂ Phone Price : $212.53
- $74.82 |Â7% OFFÂ Phone Price : $80.82
- $44.73
- $10.87 |Â16% OFFÂ Phone Price : $12.87
Top models using the same part
Model Name | Model Number | Diagram Name |
---|---|---|
Model #WSF26D3EXY00 Whirlpool side-by-side refrigerator | WSF26D3EXY00 | Icemaker parts |
Model #WSF26D3EXA00 Whirlpool side-by-side refrigerator | WSF26D3EXA00 | Icemaker parts |
Model #WSF26D3EXL00 Whirlpool side-by-side refrigerator | WSF26D3EXL00 | Icemaker parts |
Model #WSF26D4EXA02 Whirlpool side-by-side refrigerator | WSF26D4EXA02 | Icemaker parts |
Model #WRS315SDHM02 Whirlpool side-by-side refrigerator | WRS315SDHM02 | Motor and ice container parts |
Model #WRS322FDAT02 Whirlpool side-by-side refrigerator | WRS322FDAT02 | Ice maker parts |
Model #WSF26D4EXS00 Whirlpool side-by-side refrigerator | WSF26D4EXS00 | Icemaker parts |
Model #10650042713 Kenmore side-by-side refrigerator | 10650042713 | Motor and ice container parts |
Model #MSD2273VEB00 Maytag side-by-side refrigerator | MSD2273VEB00 | Icemaker parts |
Model #WSF26D4EXS02 Whirlpool side-by-side refrigerator | WSF26D4EXS02 | Icemaker parts |
Reviews
Got what I needed
Finding an ice maker for an older model appliance was a concern but Sears had what I needed. Easy to install and it works as it should.
No Name, St. Joseph, MO
1 person thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
the wrong part
I can't give a rating on this part but if i had my part witch this one is not my part i mite be able to rate the one i need, i will be sending it back.
Bill, Roseburg, OR
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy to install
Easy to install. All that is required is a small flat head screwdriver, and a 1/4 socket with a 4' extension on a ratchet.
EJ61, Pinal County, AZ
2 people thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Easy and fast to install
My ice maker quit working about three weeks a go and is now making a lot of ice now.
VEDOs H, Fort Worth, Texas
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Super easy to install
Only took about 30 minutes. As soon as I turned it on it was running. Hardest part was seeing where the screws were to loosen them. I was told they only last about 2-3 years before replacement. My old one was 3yrs.
Jim I, Hamilton. Oh
Did you find this review helpful?
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
easy to install
was getting a discolored dirty ice cube and then stopped making ice cubes altogether upon further inspection electrical connections were heavily corroded ordered new complete unit and received in 2 days
John, Arizona
2 people thought this review was helpful.
- Ease of Installation
- Very Easy
- Duration of Installation
- Less than 30 minutes
Yes, I would recommend this to a friend
Install is a Bit of a Challenge
Our refrigerator is two years old, a small Kenmore Coldspot. The freezer compartment is narrow, which makes installing the ice maker a bit of a challenge in such a tight space, particularly the screws at the rear of the device. Goor to have a ratchet-drive screwdriver.
BillM, Harwich, MA
Did you find this review helpful?
- Ease of Installation
- Moderate
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend
Wrong part for the 3rd time
I was unable to install the part because it did not come with the wiring harness and wire arm that shuts off or allows ice making. I
Becky, Ontario, OR
1 person thought this review was helpful.
- Ease of Installation
- Very Difficult
- Duration of Installation
- 30 minutes - 1 hour
Yes, I would recommend this to a friend