Error Codes
Is Kenmore Elite high end?
Yes. Kenmore Elite is Kenmore’s higher-end line, built to deliver stronger performance and more premium features than standard Kenmore models. For your Kenmore Elite dryer model 11087872800, “high end” typically shows up as better drying results, quieter operation, and more advanced cycle options.
High-end dryers focus on performance, convenience, and durability. On Kenmore Elite models, that usually includes:
- More precise temperature and moisture control for more even drying
- Better airflow design to help reduce dry times
- More cycle and option flexibility (timed, sensor, wrinkle reduction, etc.)
- Quieter operation from improved drum support and drive components
- Higher overall fit and finish compared to entry-level models
| Feature area | Standard Kenmore | Kenmore Elite |
|---|---|---|
| Drying control | Basic sensor or timed | More advanced sensor logic and options |
| Cycles/options | Fewer | More specialized cycles and features |
| Noise/vibration | Standard | Typically quieter and smoother |
| Serviceability | Good | Good (often more feature-related parts) |
If you are deciding whether to repair or replace, a Kenmore Elite dryer like 11087872800 is usually worth repairing when the issue is a common wear part (belt, idler pulley, door switch) because the platform is designed for long-term performance.
When a dryer stops feeling “high end” (long dry times, squeaks, weak airflow), these parts are often involved:
- Belt 341241 (drum turns smoothly and at the correct speed)
- Dryer blower wheel WP694089 (moves air through the drum and vent)
- Dryer idler pulley WP691366 (keeps proper belt tension and reduces squeal)
- Dryer door switch W10820036 (ensures the dryer runs only with the door closed)
Last updated: January 2026
What does F2 mean on a Kenmore dryer?
On the Kenmore Elite dryer model 11087872800, an F2 (often shown as F02) error points to a keypad or user interface problem, most commonly a stuck key on the control panel. Clearing the stuck key may restore normal operation; otherwise the user interface typically needs replacement.
- Press Cancel/Stop once, then try a normal cycle start.
- Unplug the dryer (or switch off the breaker) for 2 minutes, then restore power.
- Press each keypad button one at a time; look for a button that feels physically stuck, does not click, or stays “pressed.”
- If the code returns immediately after power-up, the keypad circuit is usually shorted or stuck.
- If the code appears only sometimes, moisture, residue, or a worn keypad membrane is often the cause.
If the keypad is not physically stuck but F2 keeps returning, the failure is usually in the user interface keypad circuitry (the console control). For this model, we recommend confirming the exact console/control part by using the model’s parts diagrams and matching your console layout.
F2 is a control issue, but if the dryer also will not start, these parts are often checked during diagnosis:
| Symptom you see | Most likely area | Example part on this model page |
|---|---|---|
| Dryer will not start when door is closed | Door switch circuit | Dryer door switch W10820036 |
| Motor hums but drum does not turn | Belt/idler system | Belt 341241, dryer idler pulley WP691366 |
| Runs but airflow is weak and drying is slow | Blower/venting | Dryer blower wheel WP694089 |
An F2 error can prevent the dryer from starting or can cause cycles to stop unexpectedly. Fixing the keypad/user interface issue restores reliable cycle selection and helps avoid repeated interruptions during drying.
Last updated: January 2026
What is the cubic foot of my Kenmore dryer model 11087872800?
Kenmore Elite dryer model 11087872800 is a full-size dryer; most full-size Kenmore 110-series dryers are about 6.0 to 7.4 cu. ft. capacity. To get the exact cubic-foot rating for your unit, match the capacity listed on the model/serial label or the product spec tag.
Use the information that is physically on the appliance so you are not relying on a “typical” range.
- Open the dryer door and check the door opening or door frame for the model/serial label
- Look for wording such as “capacity”, “cu. ft.”, or a spec line that lists drum volume
- If the label is worn, check any remaining product spec sticker on the cabinet or rear panel
- Compare the full model number 11087872800 exactly; small suffix differences can change specs
| Capacity class | Typical range (cu. ft.) | Common use |
|---|---|---|
| Standard full-size | 5.0 to 6.0 | Everyday mixed loads |
| Large capacity | 6.1 to 7.4 | Towels, jeans, bedding |
Capacity affects how well clothes tumble and how evenly heat and airflow move through the load. Overfilling a large drum causes longer dry times and more wear on drive parts.
We focus on airflow and tumbling first because restrictions can make any capacity dryer dry poorly.
- Clean the lint screen every load
- Check the vent run for crushing, kinks, or heavy lint buildup
- Inspect the lint path inside the dryer for clogs
- If the drum slips or stops turning, inspect the belt 341241 and the idler system
Related help:
Last updated: January 2026
