Kenmore Elite 11087872800 dryer Parts

Yes. Kenmore Elite is Kenmore’s higher-end line, built to deliver stronger performance and more premium features than standard Kenmore models. For your Kenmore Elite dryer model 11087872800, “high end” typically shows up as better drying results, quieter operation, and more advanced cycle options.

What “high end” means for a dryer

High-end dryers focus on performance, convenience, and durability. On Kenmore Elite models, that usually includes:

• More precise temperature and moisture control for more even drying
• Better airflow design to help reduce dry times
• More cycle and option flexibility (timed, sensor, wrinkle reduction, etc.)
• Quieter operation from improved drum support and drive components
• Higher overall fit and finish compared to entry-level models

Quick comparison: Kenmore vs Kenmore Elite (typical)

Feature area	Standard Kenmore	Kenmore Elite
Drying control	Basic sensor or timed	More advanced sensor logic and options
Cycles/options	Fewer	More specialized cycles and features
Noise/vibration	Standard	Typically quieter and smoother
Serviceability	Good	Good (often more feature-related parts)

Why it matters

If you are deciding whether to repair or replace, a Kenmore Elite dryer like 11087872800 is usually worth repairing when the issue is a common wear part (belt, idler pulley, door switch) because the platform is designed for long-term performance.

Parts that commonly affect “premium” performance

When a dryer stops feeling “high end” (long dry times, squeaks, weak airflow), these parts are often involved:

• Belt 341241 (drum turns smoothly and at the correct speed)
• Dryer blower wheel WP694089 (moves air through the drum and vent)
• Dryer idler pulley WP691366 (keeps proper belt tension and reduces squeal)
• Dryer door switch W10820036 (ensures the dryer runs only with the door closed)

Last updated: January 2026

On the Kenmore Elite dryer model 11087872800, an F2 (often shown as F02) error points to a keypad or user interface problem, most commonly a stuck key on the control panel. Clearing the stuck key may restore normal operation; otherwise the user interface typically needs replacement.

What to check first (quick reset and stuck-key checks)

• Press Cancel/Stop once, then try a normal cycle start.
• Unplug the dryer (or switch off the breaker) for 2 minutes, then restore power.
• Press each keypad button one at a time; look for a button that feels physically stuck, does not click, or stays “pressed.”
• If the code returns immediately after power-up, the keypad circuit is usually shorted or stuck.
• If the code appears only sometimes, moisture, residue, or a worn keypad membrane is often the cause.

When a part replacement is the practical fix

If the keypad is not physically stuck but F2 keeps returning, the failure is usually in the user interface keypad circuitry (the console control). For this model, we recommend confirming the exact console/control part by using the model’s parts diagrams and matching your console layout.

Related parts that are commonly replaced for “won’t start” symptoms

F2 is a control issue, but if the dryer also will not start, these parts are often checked during diagnosis:

Symptom you see	Most likely area	Example part on this model page
Dryer will not start when door is closed	Door switch circuit	Dryer door switch W10820036
Motor hums but drum does not turn	Belt/idler system	Belt 341241, dryer idler pulley WP691366
Runs but airflow is weak and drying is slow	Blower/venting	Dryer blower wheel WP694089

Why it matters

An F2 error can prevent the dryer from starting or can cause cycles to stop unexpectedly. Fixing the keypad/user interface issue restores reliable cycle selection and helps avoid repeated interruptions during drying.

Last updated: January 2026

Kenmore Elite dryer model 11087872800 is a full-size dryer; most full-size Kenmore 110-series dryers are about 6.0 to 7.4 cu. ft. capacity. To get the exact cubic-foot rating for your unit, match the capacity listed on the model/serial label or the product spec tag.

How to find the exact capacity on your dryer

Use the information that is physically on the appliance so you are not relying on a “typical” range.

• Open the dryer door and check the door opening or door frame for the model/serial label
• Look for wording such as “capacity”, “cu. ft.”, or a spec line that lists drum volume
• If the label is worn, check any remaining product spec sticker on the cabinet or rear panel
• Compare the full model number 11087872800 exactly; small suffix differences can change specs

Quick capacity guide (what the numbers mean)

Capacity class	Typical range (cu. ft.)	Common use
Standard full-size	5.0 to 6.0	Everyday mixed loads
Large capacity	6.1 to 7.4	Towels, jeans, bedding

Why it matters

Capacity affects how well clothes tumble and how evenly heat and airflow move through the load. Overfilling a large drum causes longer dry times and more wear on drive parts.

If drying performance seems “small” for a full-size dryer

We focus on airflow and tumbling first because restrictions can make any capacity dryer dry poorly.

• Clean the lint screen every load
• Check the vent run for crushing, kinks, or heavy lint buildup
• Inspect the lint path inside the dryer for clogs
• If the drum slips or stops turning, inspect the belt 341241 and the idler system

Related help:

• Kenmore elite dryer error codes

Last updated: January 2026