Frigidaire FFSC2323TSA side-by-side refrigerator Parts

To reset a Frigidaire FFSC2323TSA side-by-side refrigerator, we recommend power-cycling it by unplugging the unit (or switching off the breaker) for about 5 minutes, then restoring power. You can also reset specific control settings from the display using the Set key.

Reset options for FFSC2323TSA

• Full control reset (power cycle): Unplug the refrigerator or turn off the circuit breaker, wait about 5 minutes, then restore power.
• Factory default settings reset: Use the control panel to select the default settings option, then press and hold Set for 3 seconds (resets refrigerator settings back to factory defaults).
• Water filter status reset: Press and hold Set for 3 seconds when the water filter status is displayed.
• Air filter status reset: Press and hold Set for 3 seconds when the air filter status is displayed.
• Alarm reset (door ajar, flapper alarm): Press Set to reset system alarms after the cause is corrected.

Quick checklist before and after a reset

• Confirm the display is on and not showing power off.
• Make sure both doors are fully closed (door ajar alarms can keep coming back).
• If the dispenser is locked, press and hold control lock for 3 seconds.
• After restoring power, allow 24 hours for temperatures to fully stabilize.
• If ice or water issues continue, check the water supply valve is fully open and the filter is seated.

Which reset should I use?

What you want to fix	Best reset to try	What it affects
Control panel acting glitchy after outage	Power cycle	Reboots controls
You changed settings and want to start over	Factory default settings reset	Returns settings to default
“Replace” filter light won’t clear	Filter status reset	Resets filter indicator only
Door ajar or flapper alarm keeps sounding	Alarm reset	Clears alarm after issue is fixed

Why it matters

Using the right reset prevents unnecessary part replacement and helps you target the real issue, whether it is a control setting, a filter status light, or a dispenser alarm.

For control and reset steps specific to your display layout, use the FFSC2323TSA owner's manual.

Last updated: January 2026

On the Frigidaire FFSC2323TSA side-by-side refrigerator, the SY CF error points to a communication problem between the user interface (display) and the main control. Start with a power reset; if the code returns, focus on wiring connections and the control components.

Quick fixes to try first

• Unplug the refrigerator (or switch off the breaker) for 3 to 5 minutes.
• Restore power and wait a few minutes to see if the display clears.
• Confirm the doors are fully closed and the unit is not in a partial power state.
• If the refrigerator was just moved, make sure it was pushed back carefully so wiring is not pinched.
• Review any display messages and operating notes in the FFSC2323TSA use and care guide.

What usually causes SY CF

SY CF is most often triggered by an intermittent connection or a failed electronic component.

Likely cause	What you may notice	What to check
Loose or oxidized connector	Code comes and goes	Reseat connectors at the control and display
Pinched/damaged harness	Code appears after moving unit	Inspect harness routing for rub-through or pinch points
Failed user interface	Buttons/display act erratic	Check for unresponsive keys or flickering display
Failed main control board	Multiple odd behaviors	Verify power supply and connections, then replace if needed

Safe, practical next steps

• Disconnect power before touching any wiring.
• Inspect the wire harness between the display area and the main control for loose plugs, corrosion, or damaged insulation.
• Reseat each connector firmly (a loose plug can trigger communication faults).
• If the wiring checks out and SY CF returns after a reset, replacement typically involves the user interface and/or the main control board.

Why it matters

A communication fault can prevent normal temperature management and dispenser functions. Clearing it quickly helps protect food temperatures and avoids intermittent operation that is hard to diagnose later.

Last updated: January 2026

If your Frigidaire FFSC2323TSA side-by-side refrigerator freezer is not freezing, the most common causes are restricted airflow (dirty condenser coils or a blocked fan path), warm air leaking past the door gasket, or a control/temperature sensing issue. Start with basic airflow and temperature checks in the FFSC2323TSA owner's manual.

Quick checks we recommend first

• Confirm the freezer temperature is set colder and give it 24 hours to stabilize after any adjustment.
• Make sure both doors close fully and seal on all sides (no gaps, no torn gasket, no food packages blocking closure).
• Verify the cabinet is level and slightly tilted back so doors self-close.
• Listen for the evaporator fan running when the freezer door switch is pressed.
• Check for heavy frost on the freezer back wall (a sign of a defrost/airflow problem).

Airflow and fan problems (most common)

A side-by-side depends on strong airflow from the evaporator area to keep the freezer at 0°F.

What you notice	Likely issue	What to do next
Freezer warm, fresh food also warming	Poor airflow or sealed-system cooling issue	Check fans, coils, and vents; then consider service if both sections warm
Freezer warm but fresh food closer to normal	Air not circulating in freezer	Inspect evaporator fan area and vents for ice or blockage
Loud fan noise or no fan sound	Fan motor or blade issue	Inspect/replace Frigidaire refrigerator evaporator fan motor 809069206 or refrigerator evaporator fan blade 242219302

Temperature sensing and control checks

If airflow looks good, a bad sensor can cause incorrect cooling decisions.

• If temperatures swing or the unit runs inconsistently, test/replace the freezer temperature sensor (thermistor style) such as the refrigerator temperature sensor 240597220.
• If you see an error code, use the Frigidaire refrigerator error codes reference to match the code to the next step.

Why it matters

A freezer that cannot reach and hold safe temperatures can lead to food spoilage and can also reduce ice maker performance. Fixing airflow and sealing issues early prevents longer run times and extra wear on the compressor.

Last updated: January 2026