Craftsman 917273060 tractor Parts

Yes, it’s worth replacing the engine on your Craftsman 917273060 front-engine lawn tractor when the tractor’s chassis, mower deck, steering, and transmission are still solid and the total engine swap cost stays well below the cost of replacing the whole tractor. If the tractor has multiple worn systems, replacement usually makes more sense.

• The mower deck is not rusted through and still cuts evenly after basic leveling.
• The transmission drives smoothly (no slipping, no loss of power on hills).
• Steering and front axle parts are tight (no excessive play).
• You can source the correct engine or short block and any required pulleys/brackets.
• The total repair cost (engine + incidentals) is under about 50% of a comparable replacement tractor.

Use the maintenance and safety guidance in the 917273060 owner’s manual to do a quick condition check before investing in an engine.

Even with a “simple” engine swap, we plan for common add-ons so the tractor is reliable afterward:

• New belts or pulleys if worn (a worn drive belt can mimic power loss)
• Fuel line and filter service; the manual calls for replacing the in-line fuel filter once each season
• Tune-up items (spark plug, air filter service, oil and filter)
• Hardware that often gets damaged during teardown (nuts, clips, retainers)

An engine replacement can extend the life of a good Craftsman tractor for years, but it only pays off when the rest of the machine is safe and mechanically sound. The manual’s safety interlock checks and maintenance intervals help you avoid sinking money into a tractor that will still be unreliable.

Last updated: January 2026

On a Craftsman riding tractor like model 917273060, we identify the engine by finding the engine’s ID label or stamped numbers on the engine shroud (sheet metal) near the muffler and air cleaner. Those numbers tell you the engine make, model, and type for correct parts matching.

Check these common locations first (clean the area so the numbers are readable):

• On the sheet metal shroud directly above the muffler (muffler can be on the right or left side)
• On the front of the engine, between the overhead valve (OHV) marking and the air cleaner housing
• Near the starter or blower housing where the cooling air intake is
• On a sticker/plate on the valve cover area (varies by engine brand)

Record the engine information exactly as shown:

• Engine manufacturer (often Briggs & Stratton, Kohler, or Tecumseh on older units)
• Model number
• Type/spec number
• Code/date number (helps identify the exact version)

Your tractor model number (917273060) identifies the chassis and mower deck, but the engine numbers identify the engine itself. Using both prevents wrong-part returns and speeds up repairs like no-start, hard-start, or poor performance.

Use these tractor references while you’re confirming engine details:

• Review control and starting safety information in the 917273060 owner’s manual
• If the key is missing or damaged while you’re troubleshooting, replace it with the exact molded ignition key 532140403
• If the engine clicks but won’t crank, follow the steps in riding lawn mower engine clicks but doesnt turn over video

Last updated: January 2026

The Craftsman riding mower model 917273060 uses a 20.0 HP electric-start engine (as listed in the model’s documentation). For the exact engine manufacturer and engine model number, match the engine ID label on your tractor to the specifications section in the 917273060 owner's manual.

Use these quick checks to confirm the engine make and model on your specific tractor:

• Look for the engine ID label on the blower housing, valve cover, or near the starter
• Record the engine model, type, and code (common on Briggs & Stratton engines)
• Compare those numbers to the engine information in the 917273060 owner's manual
• If the label is dirty, wipe it clean; avoid scraping off printed numbers
• Use the tractor model number 917273060 when ordering related parts (belts, pulleys, switches)

If you are troubleshooting, these signs usually indicate the problem is in the engine or starting circuit:

• Starter clicks but the engine does not crank
• Engine cranks but will not start
• Engine starts but dies when you release the brake
• Engine runs rough or surges at steady throttle
• Engine loses power under load (mowing)

A helpful walkthrough for starting problems is riding lawn mower engine spins but wont start video.

These specs are listed for model 917273060 and are useful when verifying you are working on the correct machine.

The engine make and engine model number determine the correct tune-up parts (spark plug, air filter, fuel filter) and the right troubleshooting steps. The tractor model number 917273060 identifies the chassis and mower drive components, but the engine label identifies the engine-specific service parts.

Last updated: January 2026

Craftsman model 917273060 was produced in 2000. To confirm you are matching the correct configuration for your exact tractor (and ordering the right parts), use the diagrams and identification guidance in the 917273060 owner's manual.

Use the tractor’s ID label and engine tag to verify you are working from the correct parts breakdown.

• Find the product identification label (commonly under the seat, on the frame rail, or near the engine compartment)
• Record the model number 917273060 and the serial/product number from the label
• Record the engine model/spec numbers from the engine shroud or valve cover tag
• Match major assemblies (chassis, engine, lift, deck) to the diagrams in the 917273060 owner's manual
• If your tractor has been repaired over time, verify wear items by fit and measurements before ordering

Even within a single model year, Craftsman tractors can have running changes. Confirming the ID label and matching diagrams helps prevent ordering the wrong belt, pulley, or fuel system part.

Last updated: January 2026