Owner’s manual
Error Codes
How can I tell how many cubic feet my Kenmore refrigerator is?
For Kenmore model 10657022602, the quickest way to confirm cubic feet is to look up the capacity in the specifications section of the 10657022602 owner's manual. If you need a backup method, you can calculate capacity by measuring the usable interior space and converting cubic inches to cubic feet.
Fastest way: use the manual specs
We recommend checking the capacity listed for your exact model because it accounts for shelves, bins, and built-in components that reduce usable space.
- Find the model number label inside the fresh food section (commonly on a side wall or ceiling)
- Match it to 10657022602 (exact characters matter)
- Open the 10657022602 owner's manual and look for “Specifications” or “Product dimensions/capacity”
- If your manual covers multiple similar models, confirm you are on the page for 10657022602
Backup method: calculate cubic feet yourself
If you want an estimate, measure the interior and convert it.
Steps
- Empty the compartment enough to measure accurately
- Measure width x depth x height of the usable interior space in inches
- Multiply those numbers to get cubic inches
- Divide by 1,728 to convert to cubic feet
Conversion table
| What you have | What to do | Result |
|---|---|---|
| Inches (W x D x H) | Multiply | Cubic inches |
| Cubic inches | Divide by 1,728 | Cubic feet |
Why it matters
Knowing cubic feet helps us match the right-fit parts and accessories (like bins and filters) and helps you compare storage capacity when adjusting organization or replacing a refrigerator.
If you are also tracking water and ice performance, the how to replace the water filter in a Kenmore refrigerator guide pairs well with the correct replacement filter for this model, such as the genuine Kenmore refrigerator water filter EDR3RXD1.
Last updated: January 2026
What are the most common problems with Kenmore refrigerators?
The most common issues we see on Kenmore refrigerators like model 10657022602 are cooling problems, water leaks, ice maker or dispenser failures, frost buildup from defrost trouble, and unusual noises. Many of these start with airflow restrictions, dirty condenser coils, or a failing fan or defrost component; use the 10657022602 owner's manual troubleshooting section to narrow it down.
Most common symptoms and what usually causes them
- Not cooling or warm temperatures: dirty condenser coils, evaporator fan not running, condenser fan issues, or sealed-system/compressor problems
- Water leaking or puddles: clogged defrost drain, cracked water tubing, loose fittings, or door not sealing
- Ice maker not making ice: low water pressure, frozen fill tube, failed inlet valve, or ice maker assembly failure
- Water dispenser slow or not dispensing: clogged filter, frozen reservoir/line, inlet valve issue
- Frost buildup in freezer: defrost heater, defrost thermostat, or control problem
- Noisy operation: fan blade rubbing ice, worn fan motor, or vibration from the cabinet/lines
Quick checks we recommend first (fast, no parts guessing)
- Confirm the controls are set correctly and vents are not blocked by food packages.
- Clean condenser coils and make sure the unit has proper airflow around it.
- Listen for the evaporator fan in the freezer; a failed fan often causes warm fresh-food temps.
- If ice and water are affected, verify the refrigerator is connected to a cold water supply (the manual notes dispenser water is typically chilled only to about 50°F).
- Replace the water filter on schedule; a restricted filter can reduce dispenser flow and affect ice production.
Common part fixes for this model (when symptoms match)
| Symptom | Often-involved part | Example part for 10657022602 |
|---|---|---|
| No ice and no water | Water inlet valve | Refrigerator inlet valve W10408179 |
| Slow water, bad taste/odor | Water filter | Genuine Kenmore refrigerator water filter EDR3RXD1 |
| Frost buildup, warm temps | Defrost heater or thermostat | Refrigerator heater WP2323198, refrigerator defrost bi-metal thermostat WPW10225581 |
| Warm fridge, freezer OK or noisy | Evaporator fan motor | Refrigerator evaporator fan motor WP2315549 |
Why it matters
Catching airflow, defrost, and water-supply issues early helps prevent food spoilage, ice buildup that can damage fan components, and repeated dispenser or ice maker failures.
Last updated: January 2026
Where is the water filter on a Kenmore side by side refrigerator?
On Kenmore side-by-side refrigerator model 10657022602, the water filter is a base grille water filter located at the bottom front of the refrigerator. You reach it from the front by removing the base grille; the exact steps and orientation are shown in the 10657022602 owner's manual.
How to locate it on model 10657022602
- Look at the very bottom front of the refrigerator (below the doors).
- Find the long toe-kick style panel (the base grille).
- Open both doors for easier access.
- Remove the base grille to expose the filter area.
- Pull the filter cartridge straight out (or follow the cartridge release style shown in the manual).
Quick access steps (base grille removal)
The manual’s base grille instructions match this access method.
- Open both doors.
- Push in on the top of the base grille.
- Pull up on the bottom to remove the grille.
- Service the filter, then snap the grille back into place.
| What you’re checking | What you should see | Why it matters |
|---|---|---|
| Filter location | Base grille area (bottom front) | Confirms it is not inside the fresh food compartment |
| Access method | Base grille removes from the front | No need to pull the refrigerator out |
| Common clue it’s due | Slow dispenser flow or small ice cubes | A restricted filter reduces water flow |
Replacement filter for this model
The Use and Care information for this model lists replacement filter part #9030. A compatible replacement we list for this model is the genuine Kenmore refrigerator water filter EDR3RXD1.
Why it matters
Knowing the filter is in the base grille saves time and prevents damage to interior housings. A clogged or partially seated filter commonly causes weak water dispensing and poor ice maker fill.
Last updated: January 2026
What does code er if mean on Kenmore Elite fridge?
On Kenmore model 10657022602 side-by-side refrigerators, ER IF is treated as an ice maker airflow problem: the refrigerator is not sensing the expected fan-driven airflow that keeps the ice maker area cold. Start by restoring airflow and confirming the freezer fan runs.
What to check first (fast, no parts)
- Power reset: unplug for 5 minutes, then restore power.
- Confirm freezer temperature is set near 0°F.
- Make sure food packages are not blocking freezer vents.
- Check for frost or ice blocking the air passages near the ice maker area.
- Press and hold the freezer door switch; listen for the evaporator fan.
Likely causes
| Likely cause | What you may notice | Typical fix |
|---|---|---|
| Ice or frost blocking an air duct | Weak airflow, ice clumping | Clear the blockage; monitor for refreezing |
| Evaporator fan not running | No fan sound, warm freezer | Test and replace the fan motor if failed |
| Wiring/connector issue | Fan runs intermittently | Inspect harness connections and repair as needed |
| Control issue | Fan and ducts OK but code returns | Diagnose control outputs and sensors |
Parts commonly involved
If airflow is clear and the fan is not running correctly, these model-compatible parts are often involved:
- Refrigerator evaporator fan motor WP2315549 (drives freezer airflow)
- Refrigerator electronic control 4388932 (controls fan operation)
Why it matters
The ice maker depends on steady freezer airflow to freeze and store ice. When airflow drops, ice production slows, cubes can clump, and freezer temperatures can drift.
For operating and care steps that apply to your refrigerator, use the 10657022602 owner's manual.
Last updated: January 2026
