Husqvarna YTH24V54-96043025900 lawn tractor Parts

Your Husqvarna YTH24V54-96043025900 is the lawn tractor model; the “part numbers” are the individual replacement components used on that tractor (belts, pulleys, electrical parts, deck hardware, steering parts, etc.). The fastest way to get the right part number is to match your needed part to the correct diagram and description in the owner's manual.

These are examples of part numbers tied to common repairs and maintenance items shown for YTH24V54-96043025900:

• Ground drive belt 532130969 (listed as 1/2 x 94-in)
• Starter solenoid 582042801
• Ignition switch 532193350
• Idler pulley 532194327
• Flange bearing 532124959
• Mandrel housing 532187281

If you already know the component name (for example, “drive belt” or “starter solenoid”), using the exact part number helps ensure you get the correct fit.

Use this as a quick cross-reference when you are comparing listings.

• Identify the system first: mower deck, ground drive, steering, electrical, or engine controls.
• Use the model number YTH24V54-96043025900 to stay in the correct parts list.
• Match by description and location on the diagram, not just by appearance.
• Compare hardware carefully (nuts, bearings, pulleys) because sizes can look similar.
• When troubleshooting a no-start, confirm the symptom first (clicks, no click, spins but won’t start).

Riding mower parts often look interchangeable, but small differences in belt length, pulley bore size, or switch connector style can cause poor performance or immediate failure. Using the correct YTH24V54-96043025900 part number helps the repair go smoothly and protects the rest of the drive and deck components.

Last updated: February 2026

The Husqvarna YTH24V54-96043025900 is a 54-inch riding lawn tractor designed for larger residential mowing; it’s typically a strong fit for about 1 to 3 acres on relatively open terrain. For the most accurate guidance on operating limits (especially slopes), use the owner's manual.

Acreage depends less on engine size and more on deck width, obstacles, and terrain. A 54-inch deck generally covers ground efficiently, but trimming around trees, beds, and fencing can reduce productivity.

• Open, flat lawns: usually closer to the high end of the range
• Many obstacles: plan closer to the low end
• Hilly properties: reduce expectations and prioritize safe operation
• Thick or wet grass: mow slower and consider narrower passes
• Bagging or mulching: can reduce speed and increase mowing time

The manual’s safety guidance is the real limiter on many properties.

• Maximum slope: do not mow slopes steeper than 15 degrees
• Fuel capacity: 2.5 gallons (helps estimate runtime between fill-ups)
• Blade bolt torque spec: 45 to 55 ft-lbs (important after blade service)

Choosing the right yard size helps you avoid overworking the tractor, reduces uneven cutting, and keeps mowing time reasonable. It also helps you plan safe routes on hills and avoid traction or control issues.

Last updated: February 2026

The model number is YTH24V54-96043025900. On the operator documentation for this Husqvarna lawn tractor, the series is shown as YTH24V54, and the full model number on our parts page is YTH24V54-96043025900; use that full number when ordering parts or looking up specs in the owner's manual.

We recommend confirming the full model number on the product identification label so you match the correct parts list.

• Look for a model and serial label under the seat or seat pan area
• Check the frame near the rear fender or footrest area
• Wipe dirt and grass off the label so all digits are readable
• Write the number exactly as shown, including dashes
• Use the full model number when searching parts diagrams and hardware

Husqvarna tractors often share a similar series name (like YTH24V54), but the full model number (including the 960 prefix) identifies the exact build and parts configuration.

When you use YTH24V54-96043025900, you can confidently match common replacement parts such as:

• Lawn tractor ground drive belt, 1/2 x 94-in 592855201 for drive system belt replacement
• Lawn tractor starter solenoid 582042802 if the engine clicks but will not crank
• Husqvarna lawn tractor ignition switch 532193350 if the key switch is intermittent

Using the exact model number prevents ordering the wrong belt length, electrical switch, or deck hardware, which saves time and avoids repeat repairs.

Last updated: February 2026

The Husqvarna YTH24V54-96043025900 is equipped with a Briggs & Stratton Intek V-twin engine (24 HP class). For the exact engine model, type, and code used on your tractor, match the numbers on the engine ID label to the specifications in the owner's manual.

Briggs & Stratton engines are identified by three numbers; using them ensures you get the right tune-up parts and service specs.

• Lift the hood and find the engine ID label (often on the valve cover or blower housing)
• Write down the model, type, and code exactly as shown
• Use those numbers when selecting maintenance parts (air filter, oil filter, spark plug)
• If the label is dirty, wipe it gently so every digit is readable
• Keep the numbers with your maintenance log for faster future parts matching

Here is what you can count on for the YTH24V54-96043025900 engine setup.

If you are diagnosing a no-crank or click-no-start condition, these model-matched parts are common suspects.

• Lawn tractor starter solenoid 582042802 (clicking but no crank)
• Husqvarna lawn tractor ignition switch 532193350 (key switch not sending power to the starter circuit)
• Battery condition and cable connections (weak battery can mimic a bad solenoid)

The exact Briggs & Stratton model, type, and code determine the correct oil capacity, filter style, and ignition parts. Confirming the ID label prevents ordering the wrong maintenance parts and speeds up troubleshooting.

Last updated: February 2026