Craftsman 917287241 tractor Parts

For Craftsman lawn tractor model 917287241, the engine is a low-emission, single-cylinder gasoline engine; the exact engine brand and displacement are listed on the engine ID label and in the specifications section of the 917287241 owner's manual.

Use these quick checks to match the correct tune-up and repair parts:

• Look for the engine model/type/code sticker on the blower housing or valve cover area
• Record the full engine ID (letters and numbers) before ordering parts
• Compare the engine ID to the engine section in the 917287241 owner's manual
• If the tractor has electric start, confirm the starting circuit matches your configuration
• Verify deck size and transmission type so belts and pulleys match your build

The manual for this tractor family describes a low-emission engine and standard tractor controls (throttle/choke, ignition switch, brake pedal). In this class of Craftsman front-engine lawn tractors, the engine is typically:

The engine ID determines the correct maintenance parts (spark plug, air filter, fuel filter) and also helps diagnose no-start or no-crank issues accurately. If the engine clicks or cranks slowly, the starting circuit components are often involved, including the lawn tractor starter solenoid 582042802.

Last updated: January 2026

A “Craftsman 6.75” is not one single model; it’s an engine power rating used on many Craftsman walk-behind mowers. For the Craftsman riding lawn tractor model 917287241, the correct model identification and specs are listed in the 917287241 owner's manual.

Look for the mower’s model tag, then match that number to parts and diagrams.

• Check the rear of the deck near the discharge chute
• Look under the seat area (if it’s a self-propelled with a seat, uncommon)
• Check the handle support brackets or rear frame
• Write down the full model number (often starts with 917.)
• Also record the engine model and type from the engine shroud (helpful for tune-up parts)

“6.75” typically refers to the engine family or horsepower class, not the mower’s model number. Use the mower’s model tag to avoid ordering the wrong blade, belt, or air filter.

Craftsman mowers that share a 6.75 engine rating can use different deck sizes, blade adapters, and drive systems. Using the exact model number prevents mismatched parts and repeat repairs.

Last updated: January 2026

Yes, it’s worth replacing the engine on your Craftsman lawn tractor model 917287241 when the tractor’s chassis, mower deck, and drive system are still solid and the total engine swap cost stays well below the cost of replacing the entire tractor. If multiple major systems are worn out, replacing the tractor is the better value.

• The mower deck shell is not rusted through and the spindles are serviceable
• The tractor still drives normally (no slipping, weak pull, or loss of drive)
• Steering and brakes feel safe and controllable
• You can do the work (or pay labor) without the total cost getting close to a replacement tractor
• You want to keep your current attachments, deck size, and familiar controls

Engine replacement makes sense when you compare the full project cost, not just the engine.

Use the maintenance and troubleshooting guidance in the 917287241 owner’s manual to evaluate the rest of the tractor before spending money on an engine.

• Deck cut quality: uneven cut can point to blade, deck leveling, or mandrel issues
• Blade drive system: a worn belt or frozen pulley can mimic bigger problems
• Cooling and cleanliness: blocked grass screen or dirty cooling fins can cause overheating and engine damage
• Fuel system basics: replace the in-line fuel filter once each season; stale fuel causes hard starting and poor running
• Safety and hardware: keep nuts and bolts tight; never bypass safety devices

An engine swap only pays off when the rest of the Craftsman 917287241 is dependable. If the deck, belts, pulleys, and safety systems are already near end-of-life, a new engine can leave you with a tractor that still needs frequent repairs.

Last updated: January 2026

On the Craftsman lawn tractor model 917287241, the engine model number is printed on the engine’s identification label, typically on the top of the engine shroud (cover) or on the side of the shroud where it’s easier to see. Use the 917287241 owner's manual to confirm the exact label location for your tractor.

Check these common spots first (engine off and cool):

• Top of the engine shroud/cover (often easiest to spot on twin-cylinder engines)
• Side of the engine shroud/cover near the muffler or air intake area
• Valve cover area (label may be nearby on some engines)
• Blower housing (the metal/plastic housing around the flywheel)
• Frame rail near the engine (occasionally used for an engine family label)

Engine labels often include multiple identifiers. Here’s what to record so you get the right parts (carburetor, starter, ignition, filters):

• Wipe the shroud with a rag; grass dust and oil film can hide the print.
• Use a flashlight and take a phone photo, then zoom in.
• Write the numbers exactly as shown, including dashes.

The tractor model 917287241 identifies the mower and deck system, but the engine model/type/code identifies the exact engine build. That prevents ordering the wrong starter solenoid, ignition parts, or fuel system components.

Last updated: January 2026