Kenmore Elite 10657783703 side-by-side refrigerator Parts

Yes. For Kenmore Elite refrigerator model 10657783703, the most reliable “reset” is a power reset: turn the controls OFF (if your model has an OFF setting), unplug the refrigerator, then reconnect power and set the controls back to your normal temperatures. See the 10657783703 owner's manual for control locations and reset steps.

Use the reset method that matches what you are trying to fix:

• Power reset (general issues): turn controls OFF, unplug, wait 5 minutes, plug back in, then reset temperature settings.
• Power outage (PF) reset: if the dispenser display shows PF, press and hold RESET for 3 seconds until it beeps.
• Water filter status reset: after changing the filter, press and hold RESET for 3 seconds to return the status light to green.

1. Turn the Temperature Control or Refrigerator Control to OFF (if your control has an OFF position).
2. Unplug the refrigerator from the electrical outlet.
3. Wait 5 minutes.
4. Plug the refrigerator back in.
5. Set the refrigerator and freezer controls back to the desired settings.

A reset clears temporary control glitches and restores normal dispenser functions after a power interruption. It also ensures the controls are correctly set after you disconnect power for cleaning or service.

Last updated: January 2026

The exact cubic-foot capacity for Kenmore Elite model 10657783703 is listed on the model’s rating label and in the specifications section of the 10657783703 owner's manual. If you need a quick estimate, most Kenmore Elite side-by-side refrigerators of this style are typically in the 22 to 26 cu. ft. range.

• Check the rating label inside the fresh food compartment (often on a side wall near the crisper area).
• Look in the specifications section of the 10657783703 owner's manual.
• If your refrigerator has a base grille water filter, the manual’s accessory and filter pages help confirm you are matching the correct platform and documentation.
• If you are comparing to a replacement unit, measure the cabinet and compare to typical side-by-side sizes.

Cubic feet affects how much food you can store, how shelves and bins fit your needs, and what replacement parts or accessories (like water filters and door bins) match your refrigerator’s configuration.

If you are planning storage changes while you confirm capacity, these model-matched parts are common:

• Refrigerator deli drawer WP2188664 (drawer space and fit)
• Refrigerator crisper pan WPW10178772 (fresh food storage)
• Refrigerator cantilever bin WPW10160952 (door storage)

Last updated: January 2026

On the Kenmore Elite side-by-side refrigerator model 10657783703, defrost is typically controlled by an adaptive defrost control (ADC) on an electronic control board rather than a separate, stand-alone defrost timer. For this model, the most common access point for defrost-related controls is inside the control housing area in the fresh food section or behind an interior panel; use the 10657783703 owner's manual to confirm the exact access steps for your configuration.

• Look for a temperature control housing at the top of the refrigerator (fresh food) compartment; many Kenmore side-by-sides place the main controls there.
• Check behind the base grille only for wiring and water tubing access; that area is commonly used for door removal and dispenser connections, not for a defrost timer.
• If your unit has an electronic control, you will not find a small dial-style timer with a manual advance screw.
• If you are troubleshooting a no-defrost issue, focus on the heater, thermostat, and control rather than hunting for a timer.

If you have heavy frost on the evaporator cover or warm refrigerator temperatures with a cold freezer, these parts are frequent suspects:

• Refrigerator defrost heater WP2323198
• Refrigerator bi-metal thermostat WPW10225581
• Evaporator fan motor (airflow across the coil)
• Main control board or adaptive defrost control logic

This refrigerator circulates cold air between the freezer and fresh food sections; when frost blocks airflow, temperatures and moisture control suffer quickly. Restoring proper defrost and airflow prevents warm spots and recurring ice buildup.

Last updated: January 2026

On Kenmore Elite refrigerator model 10657783703, the ER FF code points to an evaporator fan (freezer fan) problem. That fan moves cold air from the freezer into the fresh food section, so when it fails or airflow is blocked, temperatures rise and the error can appear. See the 10657783703 owner's manual.

• Make sure the freezer vents are not blocked by food packages.
• Confirm the freezer door is closing and sealing fully.
• Listen for the evaporator fan: it should run when the compressor is running (often you can hear it with the freezer door switch held in).
• Look for heavy frost on the freezer back wall (a defrost problem can stop airflow).
• Power reset: unplug for 2 minutes, then plug back in and recheck.

If troubleshooting points to a failed defrost component or fan damage, these model-matched parts are commonly used:

• Refrigerator defrost heater WP2323198 (restores defrost heat to clear frost)
• Refrigerator bi-metal thermostat WPW10225581 (helps control defrost cycling)
• Refrigerator evaporator fan blade WP2169142 (replaces a cracked or rubbing blade)

The evaporator fan is what distributes freezer-made cold air through the refrigerator. When airflow stops, the refrigerator side warms up first, food safety is affected, and the unit can run longer than normal.

Last updated: January 2026