Maytag MSD2351KES refrigerator Parts

For your Maytag MSD2351KES side-by-side refrigerator, we recommend buying replacement parts using the full model number to ensure fit and compatibility. You can shop through Sears PartsDirect, order directly from Maytag, or use reputable appliance-parts retailers; always match the part to MSD2351KES before purchasing.

Best ways to find the right part for MSD2351KES

• Use the model number MSD2351KES first, then search by the part name (ice maker, light switch, evaporator motor).
• Confirm the part description matches your symptom (no ice, warm freezer, dispenser leak).
• Compare the part ID and part number when available.
• Check whether the part is electrical or water-related; those often require extra diagnosis.
• Use the troubleshooting and parts diagrams in the MSD2351KES owner's manual to identify the correct component.

Common MSD2351KES parts customers replace

Symptom	Common part to check	Example part for this model
No ice production	Ice maker assembly	Refrigerator ice maker D7824706Q
Warm refrigerator or freezer	Evaporator fan motor	Evaporator motor WPW10128551
Water not dispensing or slow fill	Water inlet valve	Refrigerator water inlet valve assembly WP67006531
Lights not working when door opens	Door/light switch	Refrigerator light switch (match by part ID)

Why it matters

Ordering by brand alone is the fastest way to get the wrong part. Maytag uses multiple designs across similar-looking refrigerators, so matching parts to MSD2351KES helps prevent returns and avoids repeat repairs.

Last updated: February 2026

The five main parts that make a refrigerator cool (including your Maytag MSD2351KES) are the compressor, condenser, expansion device, evaporator, and a temperature control (thermostat/thermistor). These work together to move refrigerant and regulate cabinet temperature; see the MSD2351KES owner's manual for model-specific component locations.

The “core 5” cooling-system parts (what each one does)

• Compressor: pumps refrigerant through the sealed system; it is the “engine” of cooling.
• Condenser: releases heat from the refrigerant to the room air (often near the back/bottom).
• Expansion device (capillary tube or valve): drops refrigerant pressure so it can get cold.
• Evaporator: absorbs heat inside the freezer/refrigerator as refrigerant boils off.
• Temperature control (thermostat/thermistor + control circuit): senses temperature and cycles cooling on and off.

Other major parts people often include (common “top 5” confusion)

Many customers mean “the 5 most important parts you notice day to day.” In that case, these are also key:

• Evaporator fan (moves cold air): see evaporator motor WPW10128551
• Door gaskets (keep warm air out)
• Defrost system (prevents frost buildup)
• Condenser fan (on many models)
• Ice maker and water system (if equipped)

Quick guide: symptoms and the part to check first

Symptom	Most likely system area	Example part on this model
Warm fridge and freezer	Compressor/start circuit	Refrigerator start device (start relay)
Freezer cold, fridge warm	Airflow/evaporator fan	Evaporator motor
Frost buildup, weak airflow	Defrost system	Evaporator heater
No ice production	Ice maker/water supply	Refrigerator ice maker

Why it matters

Knowing the “core 5” helps you troubleshoot faster. For example, dirty condenser coils and poor airflow can make the refrigerator run longer and cool worse; the manual also calls out keeping good airflow and cleaning coils regularly for efficiency.

Last updated: February 2026

Frost buildup in the freezer section of your Maytag MSD2351KES usually happens when moist air is getting in (door not sealing or door left ajar) or when the defrost system is not clearing normal frost off the evaporator. Start with door sealing and airflow checks, then move to defrost components.

Quick checks we recommend first

• Make sure the freezer door closes fully and does not pop back open
• Inspect the door gasket for gaps, tears, or hardened areas
• Confirm vents inside the freezer are not blocked by food packages
• Reduce frequent door openings and avoid leaving the door open during loading
• Verify the temperature controls are set to normal operating ranges (not warm)

Most common causes (and what you will notice)

Likely cause	What you typically see	What to do next
Door gasket leak or door misalignment	Frost mainly near the front, corners, or along the door edge	Clean gasket, check for gaps, level the cabinet and align doors per the MSD2351KES owner’s manual
Defrost system problem (heater, thermostat, timer/control)	Heavy frost on the back freezer wall; reduced airflow; warming temps	Manually defrost to restore airflow, then test defrost components
Airflow restriction	Frost plus uneven temps; items near vents freeze or thaw	Repack freezer to leave space for circulation

Defrost-system troubleshooting (safe, practical approach)

1. Unplug the refrigerator.
2. Remove the freezer rear panel to inspect for a solid ice mass on the evaporator cover/coils.
3. If iced over, do a full manual defrost (doors open; towels; allow several hours). Avoid overheating plastic with a heat source.
4. After defrosting, monitor for frost returning within a few days.

If you confirm an airflow issue tied to the evaporator fan area (noise, rubbing, or poor circulation), the fan components are common service items on this model, such as the evaporator motor WPW10128551 and refrigerator evaporator fan blade WP2169142.

Why it matters

A frosted-over evaporator cannot move cold air properly, so the freezer may warm up, the fresh food side may get too warm, and the compressor can run longer than normal.

Last updated: February 2026

If your Maytag MSD2351KES side-by-side refrigerator is not cooling, the most common causes are blocked airflow, incorrect temperature control settings, dirty condenser coils, or a failed evaporator fan. Start by clearing vents, confirming control settings, and allowing 24 hours for temperatures to stabilize per the MSD2351KES owner's manual.

Quick checks we recommend first

• Make sure food packages are not blocking air vents in the fresh food or freezer sections.
• Verify the temperature controls were not set to OFF (on this model, turning the freezer control to OFF stops cooling in both compartments).
• Set initial controls to a mid setting (the manual lists Freezer 4 and Refrigerator 4 as a starting point).
• Allow 8 to 12 hours for initial cooling, and up to 24 hours after any control change.
• Clean condenser coils if they are dusty or greasy.
• Check that doors close fully and gaskets seal all the way around.

Common causes and what they look like

What you notice	Likely cause	What to do next
Freezer cold, refrigerator warm	Airflow restriction or evaporator fan issue	Clear vents; listen for fan; inspect fan area
Both sections warm	Controls set to OFF, compressor/start issue, or airflow problem	Confirm settings; check for running sounds
Temps drift after loading groceries	Normal recovery time	Wait 24 hours; avoid frequent door opening
Frost buildup and weak airflow	Defrost system problem	Check airflow; plan a defrost-system diagnosis

When to suspect a fan or control part

If vents are clear and settings are correct but airflow is weak, the evaporator fan system is a top suspect. On the MSD2351KES, common service parts tied to airflow include the evaporator motor WPW10128551 and the refrigerator evaporator fan blade WP2169142. For temperature regulation problems, a failing refrigerator thermostat WP627985 can also contribute to poor cooling.

Why it matters

A side-by-side refrigerator cools by moving air between compartments. When airflow is blocked, controls are mis-set, or the evaporator fan is not moving air, temperatures rise quickly and food safety becomes a concern.

Related DIY help

• Use the steps in how to fix your evaporator cooling fan to diagnose airflow and fan problems.

Last updated: February 2026