Kenmore Elite 66513963K017 undercounter dishwasher Parts

To hard reset a Kenmore Elite dishwasher model 66513963K017, we recommend resetting the control by pressing CANCEL/DRAIN twice to clear the current cycle and reboot the control logic. If the dishwasher is unresponsive, turn power off at the breaker for 5 minutes, then restore power.

Reset options for model 66513963K017

Use the least disruptive option first.

• Reset the control (most common): Open the door, then press CANCEL/DRAIN twice.
• Cancel and drain: Press CANCEL/DRAIN once, then close the door to start the drain.
• Power reset (hardest reset): Turn the dishwasher circuit breaker OFF for 5 minutes, then back ON.
• Resume after an interruption: Close the door and press START/RESUME.
• Unlock controls (if locked): Press and hold CONTROL LOCK for 3 seconds.

For the exact button names and indicator behavior on your console, use the 66513963K017 use & care manual.

What you should see after a reset

A reset can look different depending on what the dishwasher was doing.

Reset method	What it does	What you may notice
CANCEL/DRAIN twice	Resets the control so you can select a new cycle	Lights change, cycle clears
Breaker OFF 5 minutes	Clears many “glitch” conditions after a power interruption	Display/lights reboot
CONTROL LOCK hold 3 sec	Re-enables buttons	“Lock” light turns off

If the dishwasher still will not run

A “reset” won’t fix a mechanical failure. If the unit won’t drain, won’t fill, or stops mid-cycle, check these common causes:

• Door not fully latched
• Suds from using the wrong detergent type
• Drain hose kink or disposer knockout plug not removed
• Clogged filter area in the tub bottom
• Failed drain component such as the dishwasher drain pump WPW10348269

Why it matters

Resetting the control is a fast way to clear a stuck cycle, recover from a door-open or power interruption, and get the dishwasher ready to start a new wash cycle without guessing at button combinations.

Last updated: January 2026

Yes, repairing a Kenmore Elite 66513963K017 dishwasher is usually worth it when the problem is a common wear item (like a door seal or rack parts) or a single failed component, and the tub and racks are still in good shape. If multiple major components are failing, replacement often makes more sense.

Quick way to decide (repair vs. replace)

Use these practical checkpoints before you spend money on parts or service:

• Age and condition: If the unit is within its typical service life and the racks and tub are solid, repair is usually the better value.
• Type of failure: Leaks, poor draining, or door issues are often straightforward repairs.
• Number of symptoms: One clear symptom usually points to one part; multiple symptoms can indicate broader electrical or wash-system issues.
• Cost comparison: If the repair estimate is under about half the cost of a comparable new dishwasher, repair is typically the smarter move.
• Downtime: If you can fix it quickly with a known part, repair saves time versus shopping and installing a new unit.

Common repairs that are often “worth it” on this model

These are frequent, fixable issues on many Kenmore Elite undercounter dishwashers:

Symptom	Often involved area	Example compatible part for this model
Water leaking at the door	Door gasket/seal	Dishwasher door seal W11177741
Water left in tub	Drain system	Dishwasher drain pump WPW10348269
Won’t fill or fills slowly	Water supply/inlet	Dishwasher water inlet valve W11175771

(We recommend confirming the diagnosis before ordering parts.)

Why it matters

A targeted repair can restore cleaning and drying performance without the cost and hassle of replacing an undercounter dishwasher. For the 66513963K017, routine maintenance and a single-part repair can keep the wash system running reliably.

Helpful model-specific references

• Use the troubleshooting and care sections in the 66513963K017 use & care manual to narrow down symptoms (draining, drying, detergent not dispensing, noise).
• If the issue is related to installation (drain hose routing, electrical connection, leveling), follow the 66513963K017 installation instructions.

Last updated: January 2026

Common problems we see on the Kenmore Elite 66513963K017 dishwasher include poor cleaning, water not draining, leaks at the door, and cycles that will not start or finish. Many of these issues trace back to filter maintenance, loading habits, water supply problems, or a worn seal or pump component.

Most common symptoms and what usually causes them

• Dishes still dirty or gritty: clogged filter, blocked spray arm holes, or incorrect loading
• Water left in the tub: drain hose kink, disposer plug not removed, or a failing drain pump
• Leaks: door seal wear, lower door seal wear, or oversudsing from the wrong detergent
• Won’t start or stops mid-cycle: door not latched, control lock enabled, or power interruption
• Detergent not dispensing: dispenser blocked by tall items (cutting boards, cookie sheets)

For model-specific operating and troubleshooting steps (including filter care and cycle behavior), follow the guidance in the 66513963K017 use & care manual.

Quick checks you can do first (no parts needed)

1. Confirm the door is fully closed and latched; then press START/RESUME and close the door within a few seconds.
2. Run hot water at the sink until it is hot before starting a cycle (helps cleaning and cycle time).
3. Clean the filter system and reinstall it fully seated.
4. Check that spray arms spin freely and are not blocked by large dishes.
5. Use only automatic dishwasher detergent; hand soap can cause suds and leaks.

When a part is likely involved

If the basic checks do not fix the problem, these model-compatible parts are common solutions:

Symptom	Part to inspect/replace	Why it matters
Not draining, water remains	Dishwasher drain pump WPW10348269	The pump pushes water out; a weak or jammed pump leaves standing water
Leaking at the door edge	Dishwasher door seal W11177741	A worn seal lets water escape during wash and drain
Poor cleaning, debris recirculating	Dishwasher filter W10872845	A clogged or damaged filter reduces wash performance
Not filling or fills slowly	Dishwasher water inlet valve W11175771	Low incoming water reduces spray pressure and cleaning

Why it matters

Catching these issues early helps prevent repeat wash cycles, reduces water damage risk, and keeps the wash system (pump, heater, and filtration) working efficiently.

Last updated: January 2026