Kenmore 11026912691 washer Parts

The Kenmore washer model 11026912691 is a Super Capacity Plus top-load washer with a typical capacity of about 3.2 cubic feet. For the exact capacity and load-size guidance for your specific configuration, use the 11026912691 owner's manual.

How to confirm capacity and load size on your washer

Capacity is most useful when you pair it with the washer’s load-size and water-level guidance. We recommend:

• Check the model and serial plate to confirm you are working with 11026912691 (the manual shows where this plate is located).
• Use the manual’s loading guidance so clothes can circulate around the agitator.
• Avoid packing items down; overloading reduces cleaning and can cause out-of-balance spinning.
• If you routinely wash bulky loads, choose cycles and water levels that match the fabric type.

Why capacity matters (and what it affects)

Washer capacity impacts cleaning performance, rinse quality, and spin stability. A load that is too large for the tub can lead to poor turnover around the agitator and extra strain on drive components.

Quick reference: what “3.2 cu. ft.” means in real use

Capacity (cu. ft.)	Typical load type	Practical example
~3.2	Large, everyday family loads	Mixed cottons, towels, jeans (not tightly packed)
Smaller than needed	Overfilled loads	More vibration, less cleaning, longer dry times

Related parts that can be affected by chronic overloading

If the washer is frequently overloaded or consistently goes out of balance, these common wear items can be involved:

• Washer lid switch WP3949238 (spin safety and lid detection)
• Coupling 285753A (connects motor to transmission drive)
• Clutch 285785 (helps the basket reach full spin)
• Washer suspension spring WP63907 (supports tub and helps control vibration)

Last updated: February 2026

Your Kenmore washer model number is printed on the model and serial number plate on the machine; for Kenmore model 11026912691, use that full number when ordering parts so you get the correct fit and wiring. The 11026912691 owner's manual also explains where to record the model and serial numbers.

Where to look on the washer

Most Kenmore washers place the model and serial number plate in one of these common spots:

• Under the lid near the tub opening (top-load washers)
• Inside the door opening (front-load washers)
• On the back panel near the power cord
• Along the cabinet edge near the control console

What the model number looks like (and why it matters)

Kenmore washer model numbers are often 11 characters or longer. Many Kenmore units start with 110 followed by additional digits (for example, 11026912691). Using the complete model number helps us match the right parts list, diagrams, and repair instructions.

Quick ID checklist

• Write down the full model number and serial number exactly as shown
• Take a clear photo of the plate before ordering parts
• Match the model number on the plate to the model number on your parts list
• Use the model number when searching for common repairs (lid switch, drain pump, coupling)

Common parts you may need once the model is confirmed

After you confirm the model number, these are frequent replacement items for Kenmore washers like 11026912691:

Symptom	Common part to check	Example part for this model
Won’t spin or start	Lid switch	Washer lid switch WP3949238
Won’t drain	Drain pump or drain hose	Washer drain pump WP3363394
Agitates poorly	Agitator dogs	Agitator dog 80040
No agitation/spin, motor runs	Motor coupling	Coupling 285753A

Why it matters

Kenmore used multiple designs across the 110-series; the exact model number ensures we match the correct electrical connectors, mounting points, and drive system parts (like the clutch, gear case, and drive block) for your washer.

Last updated: February 2026

Yes, repairing a Kenmore washer is worth it when the fix restores reliable washing and spinning for less than the cost of replacing the machine. For Kenmore model 11026912691, many common failures involve serviceable parts like the lid switch, drain pump, or drive coupling.

How we decide if repair makes sense

Use these practical checkpoints before you spend money:

• Symptom is isolated (no spin, no drain, no agitate) rather than multiple issues at once
• Repair is a common wear item (switch, pump, coupling, clutch)
• No major leak from the tub/gearcase area
• Washer is otherwise stable (not walking, not violently out of balance)
• You can confirm the failure with basic checks in the 11026912691 owner's manual

Typical repair cost vs. value (quick guide)

What’s wrong	Common cause	Usually worth repairing?
Won’t spin or start	Lid switch failure	Yes
Won’t drain	Pump or drain restriction	Yes
Agitates poorly	Worn agitator dogs	Yes
Spins weak/slips	Clutch wear	Often
Loud grinding, oil leak	Gearcase problem	Sometimes (higher cost)

Parts that commonly make an older Kenmore washer “worth saving”

These are frequent, straightforward repairs on this style of Kenmore top-load washer:

• Washer lid switch WP3949238 (won’t spin, won’t run)
• Washer drain pump WP3363394 (won’t drain, humming)
• Coupling 285753A (motor runs but no agitation/spin)
• Clutch 285785 (slow or slipping spin)
• Agitator dog 80040 (agitator top section not grabbing)

Why it matters

A targeted repair keeps a proven washer in service, avoids the learning curve of a new machine, and often restores performance quickly. The manual for this model also highlights installation checks (leveling and tight front-leg nuts) that reduce vibration and repeat failures. See the 11026912691 owner's manual for operating and troubleshooting guidance.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years. For your Kenmore model 11026912691, reaching the high end of that range comes down to correct installation, avoiding chronic overloading, and keeping the wash system and drain path working smoothly (per the care and operating guidance in the 11026912691 owner's manual).

Typical lifespan (what to expect)

Most Kenmore top-load washers like model 11026912691 deliver dependable service for a decade or more; wear items usually determine when performance drops.

Appliance	Typical lifespan	What usually ends it first
Top-load washer (Kenmore style)	10 to 15 years	Drive system wear, leaks, drain issues
High-use household washer	8 to 12 years	Overloading, frequent heavy cycles

What extends washer life the most

We see the biggest lifespan gains from a few consistent habits:

• Keep loads balanced; avoid packing the basket tight.
• Use the correct water level and cycle for the fabric and load size.
• Prevent leaks by checking fill hoses and the drain hose routing.
• Address slow draining quickly (clogs and pump strain shorten life).
• Follow the operating and care steps in the 11026912691 owner's manual.

Parts that commonly affect longevity

When a washer starts slipping, not spinning, not draining, or agitating poorly, these are common wear points on this model family:

• Washer lid switch WP3949238 (won’t spin or drain if the lid switch fails)
• Washer drain pump WP3363394 (slow drain, no drain, or grinding noise)
• Coupling 285753A (motor runs but washer won’t agitate or spin)
• Gear case 3360629 (loud operation, oil leaks, weak agitation/spin)

Why it matters

A washer can still “run” past its prime but clean worse, vibrate more, and strain major components. Catching early symptoms and replacing a single wear part often prevents bigger repairs and helps you get the full 10 to 15 years.

Last updated: February 2026