Kenmore 11018522790 washer Parts

Kenmore washer model numbers are structured so the first 3 digits identify the manufacturer, the next set of digits identifies the base model design, and the remaining digits indicate feature or production variations. For your Kenmore washer model 11018522790, the 110 prefix is the key identifier.

What each section of a Kenmore model number means

Most Kenmore washer model numbers break down like this:

• Prefix (first 3 digits): identifies who built the washer for Kenmore (example: 110)
• Base model digits (middle group): identifies the core platform or design family
• Suffix digits (last group): identifies version details such as color, feature package, or production change

How to use the model number when ordering parts

Using the full model number helps us match the correct diagrams and parts list for your exact washer.

• Use the entire model number when searching parts: 11018522790
• Match parts by both part name and part ID when possible
• Confirm fit using the exploded view diagrams and notes in the owner's manual

Common examples (quick reference)

Model number section	Example from 11018522790	What it tells you
Manufacturer prefix	110	Who built it for Kenmore
Base model	18522	Core design family
Variation/suffix	790	Version or production variation

Where to find the model number on the washer

On Kenmore washers like model 11018522790, the model and serial number are printed on the Model and Serial Number Plate. We recommend recording both numbers for future parts lookups and service reference (details are shown in the owner's manual).

Why it matters

Kenmore washers can look similar across multiple model variations, but internal parts like the drive system, drain pump, or agitator components can differ. Using the full model number helps prevent ordering the wrong replacement part.

Last updated: February 2026

To unclog the drain hose on your Kenmore washer model 11018522790, unplug the washer, remove as much water as possible, then check for kinks and clear blockages in the hose and pump path. Reinstall the hose correctly to prevent leaks and repeat clogs (see the 11018522790 owner's manual).

Quick steps to clear the clog

• Unplug the washer to prevent shock.
• If the tub is full, bail water out or use a wet/dry shop vacuum at the standpipe/laundry tub to pull water out.
• Inspect the external drain hose for kinks, crushing, or a tight bend behind the washer.
• Remove the drain hose from the washer connection and flush it with hot tap water; push out debris with a small drain snake or flexible brush.
• Check the drain path at the pump inlet for lint, coins, socks, or small items; clear the obstruction.
• Reconnect the hose using the clamp method described in the manual (twist and push the hose fully onto the drain connector, then position the clamp at the marked area).

Drain hose setup checks (prevents “won’t drain” repeats)

A clog often comes back when the hose is installed in a way that restricts flow.

Setup item	What to do	Why it matters
Standpipe height	Keep the drain hose at 96 inches or less above the floor	Too high can cause “won’t drain/won’t spin” symptoms
Air gap at standpipe	Keep a loose fit; do not tape/seal the hose into the standpipe	Prevents siphoning and “cycle stuck draining”
Hooked end	Do not straighten the hooked end or force excess hose into the standpipe	Reduces kinks and backflow

When a part is likely involved

If the hose is clear but the washer still drains slowly, hums, or leaves wet loads, the drain pump can be jammed or failing. For this model, the replacement pump is the washer drain pump WP3363394.

Why it matters

A restricted drain hose or blocked pump prevents proper draining and can stop the washer from spinning after neutral drain. Fixing the restriction and setting the correct hose height and air gap protects floors from leaks and helps the washer complete the cycle normally.

Last updated: February 2026

Most Kenmore washers average 10 to 15 years of service life with normal household use. For your Kenmore model 11018522790, consistent maintenance (proper loading, leveling, and periodic cleaning) is what most directly determines whether it lands closer to 10 years or closer to 15.

Typical lifespan by use and care

A washer’s lifespan is mainly driven by load size, cycle frequency, and how well the drive and drain systems are protected from strain.

• Normal use (3 to 5 loads/week): 10 to 15 years
• Heavy use (daily loads, large families): closer to 8 to 12 years
• Light use (1 to 2 loads/week): often 12 to 15 years
• Frequent overloading or chronic out-of-balance loads: shortens life quickly
• Good maintenance habits: extends life by reducing wear on the clutch, gear case, and drain pump

What to do to reach the high end of the range

We recommend these habits for Kenmore top-load washers like model 11018522790:

• Keep the washer level to reduce vibration and suspension wear
• Avoid overloading; it strains the drive system and clutch
• Use the right amount of detergent to reduce residue buildup
• Check pockets and wash small items in a bag to help prevent drain clogs
• Address new noises early (grinding, squealing, or banging)

Common wear items that affect longevity

If performance drops, replacing a worn part can often restore normal washing and spinning and help the washer last longer.

Symptom	Commonly involved part	What it impacts
Agitator not moving well	Agitator dog 80040	Agitation action and turnover
Won’t drain or drains slowly	Washer drain pump WP3363394	Draining and spin performance
Loud spin, poor spin, burning smell	Clutch 285785	Basket engagement during spin
Leaking at tub area	Washer tub gasket W10814296	Sealing and water containment

Why it matters

A washer near the end of its lifespan often shows up as weak agitation, poor draining, or unstable spinning. Catching those symptoms early helps prevent secondary damage to higher-cost components like the gear case.

For model-specific operating and care guidance, follow the maintenance and troubleshooting sections in the owner's manual.

Last updated: February 2026

In a Kenmore washer like model 11018522790, the parts that fail most often are the ones that move water, transfer power, or stabilize the tub. Typical failures show up as no drain, no spin/agitate, leaks, or loud vibration; routine care and correct hose setup from the owner's manual helps prevent repeat problems.

Most common failed parts (and what you notice)

• Drain system: won’t drain, water left in tub, humming or grinding; check the washer drain pump WP3363394.
• Drive coupling: motor runs but washer won’t agitate or spin; inspect the coupling 285753A.
• Agitation components: weak or no agitation, clothes not moving; common wear items include the agitator dog 80040 and agitator cam 285748.
• Clutch and spin drive: slow spin, burning smell, poor water extraction; inspect the clutch 285785.
• Water fill controls: wrong water temperature or slow/no fill; check the mixing valve 285805 and the temperature switch WPW10168263.
• Suspension and balance parts: banging, walking, out-of-balance loads; inspect the washer suspension spring WP63907 and counterweight spring (red) WPW10250667.

Quick symptom-to-part checklist

Symptom	Most likely area	Parts to check on this model
Won’t drain	Drain pump or blockage	Washer drain pump WP3363394
Won’t agitate	Agitator drive parts	Agitator dog 80040, agitator cam 285748
Won’t spin	Coupling or clutch	Coupling 285753A, clutch 285785
Leaks	Hoses, tub seal, pump	Inlet hoses (inspect), washer tub gasket W10814296
Excess vibration	Suspension/balance	Washer suspension spring WP63907, counterweight spring (red) WPW10250667

Why it matters

Catching a failing pump, coupling, or suspension part early prevents secondary damage (like water leaks, stripped drive components, or repeated out-of-balance spinning). The manual also calls out hose practices that reduce leak risk, including inspecting hoses and replacing inlet hoses after about 5 years of use.

Practical prevention steps we recommend

• Empty pockets to prevent coins and hardware from damaging the tub or pump.
• Keep the drain hose routed without kinks and avoid forcing excess hose into the standpipe.
• Inspect inlet hoses for bulges, cracks, and leaks; replace on a 5-year schedule.
• Clean the washer interior periodically (hot cycle with detergent and bleach, as directed).
• Stop using the washer if you smell burning or hear grinding; check drive and spin components.

Last updated: February 2026