Kenmore Elite 10644422602 side-by-side refrigerator Parts

On Kenmore Elite side-by-side refrigerator model 10644422602, the model number is printed on the model and serial number label located on the inside wall of the refrigerator compartment. Open the fresh-food door and look along the interior side walls for the rating label; it lists both the model and serial numbers. See the owner's manual for the exact label location callout.

How to find the label quickly

• Open the refrigerator (fresh-food) door, not the freezer door
• Look on the inside wall near the front edge of the cabinet liner
• Check both left and right interior side walls
• Look for a rectangular rating label with “Model” and “Serial” fields
• Write the numbers down exactly as shown (including any leading digits)

What you should record (and why)

The label includes two key identifiers. Recording both helps us match the correct Kenmore parts diagrams and ensure you order the right replacement parts.

Item on label	What it’s used for	Tip
Model number	Identifies the exact refrigerator design and parts list	Use the full model number, not just “106.”
Serial number	Identifies the production run and can affect part revisions	Copy letters and numbers exactly

Why it matters

Kenmore model numbers can look similar across side-by-side refrigerators, but small design changes affect parts like the water filter housing, ice maker assembly, and dispenser components. Using the complete model number from the label helps prevent ordering the wrong part.

Last updated: February 2026

Your refrigerator’s model is 10644422602 (Kenmore Elite side-by-side). To confirm it on the appliance, we look for the model and serial number label; for this model family, that label is located on the inside wall of the refrigerator compartment. See the owner's manual for the exact label location and recording details.

Where to find the model number label

We use these common label locations on Kenmore side-by-side refrigerators:

• Inside the fresh food (refrigerator) compartment on an interior side wall
• Near the crisper area (look along the side walls around the lower drawers)
• On the inside wall where the shelves mount (mid-level side wall)
• If you do not see it right away, remove items and use a flashlight to scan the side walls

What to write down (and why)

Record both numbers exactly as shown on the label:

• Complete model number (for example, 10644422602)
• Serial number
• Purchase/installation date (helpful for service history and parts matching)

Why it matters

We use the full model number to match the correct Kenmore parts diagrams and ensure replacements like a refrigerator water filter, ice maker assembly, or control components fit your exact configuration.

Quick check: model number vs. serial number

Item on the label	What it tells us	Example format
Model number	Which parts fit your refrigerator	10644422602
Serial number	Production identifier for your specific unit	Letters and numbers

Last updated: February 2026

Yes. The Kenmore Elite 10644422602 is part of Kenmore’s premium “Elite” lineup, which is positioned above standard Kenmore models with more upscale features and finishes. For a side-by-side refrigerator, it fits the high-end tier within the Kenmore brand, especially when properly maintained using the care and setup guidance in the owner's manual.

What “high-end” means for this model

For the 10644422602, “high-end” typically shows up as better fit and finish, stronger feature sets (like in-door ice and water), and a design intended for long-term everyday use.

Common high-end expectations for an Elite side-by-side include:

• In-door water filtration and a dedicated filter system
• Through-the-door ice dispensing components
• More advanced temperature management than entry-level models
• Higher parts complexity (more controls, switches, and dispenser components)
• Better overall capacity and storage flexibility than basic side-by-sides

Parts that support premium features

High-end models often have more serviceable dispenser and filtration parts. For this model, examples include:

• Genuine Kenmore refrigerator water filter EDR3RXD1 for filtered water and ice
• Whirlpool refrigerator ice maker assembly 2198597 for automatic ice production
• Refrigerator microcomputer W11629974 for electronic control functions

Quick comparison: Elite vs standard side-by-side

Category	Kenmore Elite 10644422602	Typical standard side-by-side
Feature set	More dispenser and control features	More basic controls and options
Service parts	More specialized parts (filter, dispenser, controls)	Fewer specialized parts
Ownership	More maintenance opportunities (filter changes, dispenser upkeep)	Less maintenance complexity

Why it matters

Knowing this is a higher-end Kenmore model helps set expectations: you usually get more convenience features, but you also need to stay on top of maintenance (especially water filter changes) to keep ice and water performance strong.

Last updated: February 2026

A Kenmore Elite 10644422602 side-by-side refrigerator typically lasts 10 to 15 years. Regular maintenance (especially keeping the condenser area clean and ensuring doors seal tightly) helps it reach the higher end of that range and reduces the chance of costly sealed-system problems.

Typical lifespan and what affects it

Most refrigerators in this class land in the 10 to 15 year window. The biggest factors that move lifespan up or down are:

• Condenser coil cleanliness (dust buildup makes the system run hotter and longer)
• Door gasket condition (air leaks cause longer run times and frost issues)
• Ice maker and dispenser use (more moving parts and water components)
• Water quality and filter changes (protects valves and reduces clogs)
• Room temperature and ventilation (tight enclosures increase heat load)

Maintenance that extends life (high impact)

Use these habits to keep your Kenmore Elite 10644422602 running efficiently:

• Vacuum and brush the condenser area regularly (more often with pets)
• Keep the freezer and fresh food sections from being overpacked so air can circulate
• Confirm doors close fully and the gaskets are clean and pliable
• Replace the water filter on schedule; use the correct filter for this model
• Level the refrigerator so doors self-close and don’t hang open

Parts that commonly drive “repair vs replace” decisions

If performance drops, these are common systems to evaluate first:

Symptom	Common area to check	Example part on this model page
No ice or poor ice production	Ice maker assembly, fill system	Whirlpool refrigerator ice maker assembly 2198597
Warm temps or poor airflow	Evaporator fan, airflow path	Refrigerator evaporator fan blade WP2169142
Water tastes off or flow is slow	Water filter, filter housing/cap	Genuine Kenmore refrigerator water filter EDR3RXD1

Why it matters

Knowing the typical lifespan helps you plan: if your unit is near (or past) the 10 to 15 year mark, investing in maintenance and addressing small issues early can prevent bigger failures and keep food temperatures stable.

For model-specific care and maintenance intervals, follow the owner's manual.

Last updated: February 2026

Common issues we see with the Kenmore Elite 10644422602 side-by-side refrigerator are “won’t run,” warm temperatures, excess running time, unusual noises, moisture buildup, and ice maker or dispenser problems. Many of these are caused by airflow restrictions, control settings, or normal operating conditions described in the owner's manual.

Most common symptoms and what they usually point to

• Refrigerator will not operate: power cord unplugged, dead outlet, tripped breaker, controls turned off
• Temperature too warm: blocked air vents, frequent door openings, large food load, controls not set for conditions
• Runs too much: warm room, frequent door openings, high-efficiency compressor running longer
• Noisy operation: normal sounds like buzzing (water valve), pulsating (fans/compressor), sizzling (defrost), popping (wall expansion)
• Interior moisture: humid room, doors opened often, vents blocked, defrost cycle timing

Quick checks we recommend first (no parts needed)

1. Verify power at the outlet (plug in a lamp) and reset the breaker if needed.
2. Confirm the temperature controls are turned on and set appropriately.
3. Make sure air vents are not blocked in either compartment.
4. Allow 24 hours after installation or major changes for temperatures to stabilize.
5. If doors were just opened and closed, wait 30 seconds before reopening (helps with suction and sealing).

When a part is commonly involved

If the symptom persists after the checks above, these model-relevant parts are often involved:

Symptom	Common part area	Example part for this model
Not making ice / low ice	Ice maker assembly	Whirlpool refrigerator ice maker assembly 2198597
Warm temps with frost/defrost issues	Defrost thermostat	Refrigerator defrost bi-metal thermostat WPW10225581
Poor airflow or warm fridge section	Air diffuser/damper	Refrigerator air diffuser WP2220377
Water dispensing issues or leaks	Filter, cap, tubing	Genuine Kenmore refrigerator water filter EDR3RXD1, refrigerator water filter cap (black) WP2260518B, refrigerator water tube 8201597

Why it matters

Most “cooling problems” on a side-by-side refrigerator are really airflow or defrost management problems. Clearing vents, confirming control settings, and understanding normal compressor and defrost sounds prevents unnecessary part replacement and helps restore stable temperatures faster.

Last updated: February 2026