Official Tappan wall oven/microwave combo parts

Repairing arc burn marks inside the microwave cavity of your Tappan wall oven microwave combo

• For microwaves that are not stainless steel on the inside, you can repair arc marks up to the size of a quarter using this touch-up paint, but only if the marks appear on the inside walls, the floor, or the ceiling. Don't attempt repairs on the outer frame, or the door. Any repairs to the door or frame could affect the shielding and cause radiation leaks. And don’t attempt repairs on burn marks larger than a quarter, as that could be a sign of a more serious problem and should be checked out by a service technician. Also, don't use this repair on microwaves with a stainless steel the inside, because the paint won’t stick.
• Clean the area using soapy water and dry the spot thoroughly.
• Sand the burnt spot down to bare metal using a fine grit sand paper. Wipe the area clean to remove any residue.
• Apply a thin coat of microwave cavity touch up paint. Wait for 5 minutes to allow the first coat of paint to dry. Reapply a second coat of microwave cavity touch-up paint. Be sure to wait 24 hours for the paint to dry before using your microwave.

Tappan wall oven microwave combo common replacement parts

• Bake element. The bake element is at the bottom of an electric oven and provides the heat for the baking.
• Broil element. The broil element is at the top of an electric oven interior and provides the heat for the broiling.
• Oven door light switch. The oven door light switch is a plunger switch on the frame of the oven above the opening to the oven. The oven door pushes the oven light switch plunger in when the door is closed to turn the light off. When the door is open, the plunger is released and the light is on.
• Outer oven door glass panel. The outer oven door glass panel is the heat-resistant piece of glass that forms the outer part of the oven door.