Kenmore 79641373211 washer Parts

To identify your Kenmore washer model, find the model/serial tag on the washer cabinet and match the full model number exactly (for this unit, it’s 79641373211). On front-load washers, the tag is commonly behind the door or on the door opening.

Where to look on model 79641373211

Check these common label locations first:

• Behind the washer door, on the door opening (door jamb)
• Along the inside edge of the front panel opening
• On the back of the control panel area
• On the side of the main cabinet near the bottom (left or right side)
• On the rear panel of the washer cabinet

What to write down (and why)

Record the full model number and serial number exactly as shown. That information ensures we match the correct Kenmore parts list, diagrams, and troubleshooting steps in the 79641373211 owner’s manual.

Quick checklist

• Copy the model number character-for-character (no spaces)
• Copy the serial number character-for-character
• Note any suffixes or revision codes printed near the model number
• Take a clear photo of the tag for reference

Model number vs. serial number

Item	What it tells us	Used for
Model number	The exact washer design and parts fit	Ordering parts, diagrams, manuals
Serial number	Production run and build details	Service history, some part variations

Why it matters

Kenmore model numbers can look similar, but small differences can change which door lock assembly, water inlet valve, or drain pump fits. Using the exact model number helps avoid ordering the wrong replacement part and reduces repair downtime.

Last updated: February 2026

A Kenmore washer typically lasts 10 to 15 years. For the Kenmore 79641373211 washer, lifespan depends most on load size, detergent use (HE), and routine care; consistent maintenance helps you reach the high end of that range.

Typical lifespan and what affects it

Most washers fail from wear in a few high-stress systems. These factors make the biggest difference:

• Usage volume: multiple loads per day shortens life faster than a few loads per week
• Overloading: strains the drive system, tub support, and suspension
• Water quality: sediment can clog inlet screens and valves
• Drain habits: coins, lint, and small items stress the drain pump and hoses
• Cleaning routine: reduces odor, residue, and corrosion over time

For model-specific care and cleaning steps, follow the 79641373211 owner's manual.

Signs your washer is nearing end-of-life

If you see these repeatedly, repairs become more frequent:

• Loud rumbling or grinding during spin
• Repeated no-fill or no-drain symptoms
• Door won’t lock or unlock reliably
• Persistent leaks at the front or underneath
• Heavy vibration even with properly balanced loads

Repair vs. replace: a practical rule of thumb

Use age plus repair scope to decide.

Washer age	What usually makes sense	Common examples
0-7 years	Repair	valve, hose, door lock, minor leak
8-12 years	Case-by-case	pump, motor, suspension parts
13-15+ years	Replace more often	multiple major issues or repeated breakdowns

If you are troubleshooting fill problems, a common wear item is the washer water inlet valve 5221ER1003A.

Why it matters

Planning around the 10 to 15 year window helps you avoid surprise downtime, protect flooring from leak damage, and decide when a part replacement is worth it versus investing in a newer, more efficient washer.

Last updated: February 2026

The exact cubic-foot capacity for Kenmore washer model 79641373211 is listed in the product specifications section of the 79641373211 owner's manual. For most Kenmore 796-series front-load washers, capacity is typically in the 4.0 to 5.0 cu. ft. range.

How to find the capacity for model 79641373211

We recommend using the manual because it ties the capacity to your exact model and configuration.

• Open the 79641373211 owner's manual
• Look for Specifications, Product dimensions, or Capacity
• If the manual lists capacity in liters, convert to cubic feet (1 cu. ft. = 28.3 L)
• If you see multiple capacities, use the one labeled washer capacity (not tub volume)
• Match the model number exactly: 79641373211

Typical capacity ranges (for quick comparison)

Washer type	Typical capacity (cu. ft.)	What that means
Compact front-load	2.0 to 2.8	Smaller loads, limited bedding
Standard front-load	4.0 to 5.0	Most family loads, queen bedding
Large front-load	5.0 to 6.0	Bulky items, fewer loads

Why it matters

Capacity affects how much you can wash per cycle, how well items tumble, and how much detergent you should use (especially with HE detergent). Overloading a front-load washer can also contribute to out-of-balance spinning and drainage issues.

Last updated: February 2026

Kenmore is a brand name, so replacement parts for Kenmore washers like model 79641373211 are typically manufactured by the same major companies that built the washer’s components (commonly LG, Whirlpool, Electrolux/Frigidaire, or GE). The most reliable way to match the correct maker is to cross-reference the exact part ID and description in the 79641373211 owner's manual.

How to tell who made your Kenmore washer part

We recommend identifying the part by its part ID/part number, not by the Kenmore name on the lid. For model 79641373211, many components are LG-manufactured style parts.

• Find the model tag and confirm the full model number: 79641373211
• Look up the failed component by name (water inlet valve, door lock, drain pump, etc.)
• Match the exact part ID to avoid ordering a similar-looking part
• Compare hose ports, electrical connectors, and mounting points before installing
• Use the manual’s troubleshooting and parts references to confirm the correct assembly

Examples of manufacturer-style parts you may see on this model

Here are a few common replacements for this washer that reflect the underlying manufacturer supply chain.

Part type	Example part for 79641373211	What it does
Water inlet valve	Lg washer single-solenoid water inlet valve 5220FR2006H	Controls water flow into the dispenser/tub
Door lock	Lg washer door lock assembly EBF49827801	Locks the door during wash and spin
Drain pump	Lg washer drain pump AHA72973309	Pumps water out during drain/spin

Why it matters

Kenmore parts sourcing varies by model and component. Ordering by the exact part ID ensures the replacement fits correctly, connects properly, and resolves the symptom (no fill, won’t lock, won’t drain) without repeat repairs.

Last updated: February 2026

A washing machine like Kenmore model 79641373211 is built around a wash system (tub and drum), a water-fill system (inlet valves and dispenser), a drive system (motor), and a drain system (pump and hoses), all managed by controls and safety locks. For your model’s diagrams and locations, use the 79641373211 owner’s manual.

Core systems and what they do

• Wash basket and outer tub: hold clothes and water; the basket spins inside the tub.
• Water inlet and dispenser: brings in hot and cold water and routes it through the detergent drawer.
• Drive system: turns the basket for wash and spin.
• Drain system: pumps used water out through the drain hose.
• Controls and sensors: select cycles, monitor water level, and protect the machine.
• Door lock (front-load): keeps the door locked during operation for safety.

Common parts you may replace on this model

These are examples of main service parts we see replaced on Kenmore 79641373211 washers:

• Lg washer drain pump AHA72973309 (drains water during drain and spin)
• Washer water-level pressure switch 6601ER1006G (senses water level)
• Lg washer door lock assembly EBF49827801 (locks and verifies door closed)
• Washer tub-to-pump hose 4738ER1002A (moves water from tub to pump)
• Washer detergent dispenser 3891ER2003A (routes detergent into the wash)

Quick “part to symptom” guide

If you notice this	Often involved parts	What to check first
Won’t drain	Drain pump, tub-to-pump hose	Coin trap/filter area, hose blockage
Won’t fill or fills slowly	Water inlet valve, dispenser hose	House faucets fully open, inlet screens
Door won’t lock/unlock	Door lock assembly	Door alignment, latch area debris
Overfills or won’t sense water	Pressure switch	Pressure hose connection and kinks

Why it matters

Knowing the main systems helps you troubleshoot faster and order the right Kenmore parts the first time. For example, a “no drain” problem is usually in the drain system (pump or hose), not the motor.

Last updated: February 2026