Kenmore 79579299902 refrigerator Parts

Kenmore refrigerator model 79579299902 is a top-mount (top freezer) refrigerator; most units in this class are about 33 inches wide, 30 to 34 inches deep, and 66 to 70 inches tall. For the exact cabinet and door-swing dimensions for your specific unit, use the 79579299902 owner's manual.

These ranges help with delivery planning, cabinet cutouts, and door clearance when the exact spec sheet is not in front of you.

• Width: 29 to 33 inches (many Kenmore 795 top-mount models are near 33 inches)
• Height: 66 to 70 inches (to the top of the hinge cover)
• Depth: 30 to 34 inches (cabinet only)
• Depth with handles: often 33 to 36 inches
• Door swing clearance: plan extra space on the hinge side

Use a tape measure and record to the nearest 1/8 inch.

• Measure width at the widest point (often the hinge caps, not the doors)
• Measure height from floor to the top (include hinge cover)
• Measure depth three ways: cabinet only, with doors, and with handles
• Measure door swing: open the door to 90 degrees and note how far it projects
• Confirm the unit is level; a tilted cabinet can change door alignment and clearances

Correct dimensions prevent delivery surprises, ensure proper airflow around the refrigerator, and help avoid door interference that can wear hinges and gaskets over time.

Last updated: January 2026

A Kenmore Elite refrigerator typically lasts 12 to 15 years. For a Kenmore top-mount refrigerator like model 79579299902, steady temperatures, clean airflow, and tight door seals are the biggest factors that help you reach (or beat) that lifespan; check the 79579299902 owner's manual for the maintenance schedule.

Most refrigerators fall into a predictable range, but real-world life depends on usage and conditions.

• Typical lifespan: 12 to 15 years
• Often shorter when: coils are clogged, doors do not seal, unit runs hot, frequent power issues
• Often longer when: condenser area stays clean, doors close squarely, temperatures stay stable

We recommend these practical steps for Kenmore top-mount units:

• Vacuum dust from the condenser area and nearby floor regularly.
• Keep food from blocking interior air vents so cold air can circulate.
• Confirm doors close on their own and sit level; adjust leveling feet if needed.
• Clean and inspect door gaskets; replace if torn or permanently warped.
• If you have a water dispenser or ice maker, address slow fills and leaks early (they can lead to corrosion and icing).

A refrigerator that runs hotter or leaks cold air cycles longer; that extra run time increases wear on the compressor, fans, and electronic controls, which are some of the most expensive repairs.

Last updated: January 2026

Kenmore model 79579299902 is made for Kenmore by LG (Kenmore is a brand name; the actual manufacturer varies by model). For this 795-prefix refrigerator platform, LG is the manufacturer behind the unit and its core components.

Kenmore appliances are commonly identified by a model prefix that points to the original manufacturer.

• 795 model prefix: typically indicates LG manufacturing
• The manufacturer matters most when matching replacement parts and service procedures
• Using the full model number helps ensure correct fit for items like a door gasket, control board, or water valve

Knowing LG made the Kenmore 79579299902 helps you choose the right part design and troubleshooting steps, especially for cooling, defrost, and water system issues.

Use these quick checks to avoid ordering the wrong component:

• Confirm the model number is exactly 79579299902 on the rating label
• Match the part by part ID (not just a description)
• Compare photos and mounting points (hinges, gaskets, valves)
• Follow the disassembly steps in the 79579299902 owner's manual

• Warm refrigerator section: airflow damper, evaporator fan, control
• Water leaking inside: drain tube or defrost drain restriction
• Door not sealing: gasket, hinge/bushing wear, cabinet leveling

Last updated: January 2026