Kenmore Top-mount refrigerator Parts — Browse All Models

Common repair parts for Kenmore top-mount refrigerators

• Compressor start relay. The compressor start relay starts the compressor and shuts off the compressor if the motor overheats. Replace the start relay if it's defective.
• Condenser fan. The condenser fan is in the machine compartment of the refrigerator next to the compressor. It moves air across the condenser coils to help cool the hot refrigerant coming out of the compressor. The refrigerant is cooled before it moves through the expansion device and into the evaporator.
• Defrost bi-metal thermostat. The defrost bi-metal thermostat is a safety device attached to the evaporator coil. The defrost bi-metal thermostat shuts off the refrigerator defrost heater if the heater gets hot enough to damage the evaporator.
• Door gasket. The refrigerator door gasket is a flexible seal that attaches to the outer edge of the refrigerator door to form an airtight seal around the door opening when the door is closed. The door gasket prevents warm, moist air from leaking into the refrigerator compartment.
• Electronic control board. The refrigerator electronic control board controls the major electro-mechanical components in the refrigerator. When the electronic control board senses the compressor needs to run to cool the refrigerator, it sends voltage to the compressor and fans. It then receives input from temperature sensors to monitor the temperatures inside the refrigerator and freezer sections. With this information, the electronic control board controls the defrost cycle.

What to do when you see water under the crisper drawers in your Kenmore top-mount refrigerator

When the freezer in a top-mount refrigerator defrosts, water drains down through a defrost tube into a drain pan and eventually evaporates. If the defrost drain tube is clogged with ice or gunk, the water can't drain down the tube. Instead, it collects in a puddle under the crisper drawers. Clearing the drain tube usually fixes the problem. Replace the drain tube if it's damaged or you can't clear a clog.

Water leaking from the water dispenser system can also wind up under the crisper drawers, so check water system tubing for leaks and replace any damaged tubes.