Owner’s manual
Error Codes
How to read Kenmore model numbers?
Kenmore model numbers are read in two parts: the first 3 digits identify who built the appliance, and the remaining digits identify the specific design series and feature set. For Kenmore washer model 11020992991, the 110 prefix indicates a Whirlpool-built washer; the rest narrows down the exact version for correct parts.
Your Kenmore washer’s model number is on the model and serial number plate. On top-load washers like this, it’s commonly found under the lid or on the cabinet opening.
- Lift the lid and look around the rim of the tub opening
- Check the back of the control console area
- Look on the rear panel of the washer cabinet
- Write down the full model number and serial number exactly as shown
For the official locations and labeling details, use the owner's manual.
Kenmore numbers are most useful for parts compatibility. The prefix helps identify the manufacturing source, and the remaining digits help match the correct component revisions.
| Model number section | What it means | Why you care |
|---|---|---|
| First 3 digits (prefix) | Manufacturer code (example: 110 = Whirlpool-built) | Helps match the correct parts system |
| Remaining digits | Series, engineering changes, and configuration | Ensures the right fit for parts like a lid switch or drain pump |
Even small model-number differences can change which parts fit. When you use the full model number 11020992991, you avoid ordering the wrong version of common washer parts such as:
- Lid switch
- Drain pump
- Motor coupling
- Gear case
- Agitator components
If you’re troubleshooting agitation or spinning issues, the parts list for this model commonly includes items like the coupling 285753A and washer lid switch WP8054980.
- Use the entire model number, not just “Kenmore 110”
- Match letters and digits exactly (no spaces added or removed)
- Keep a photo of the model plate for reference
The model number is the fastest way to get the correct Kenmore washer parts and repair instructions; it ties your washer’s exact build to the right diagrams, troubleshooting steps, and replacement components.
Last updated: February 2026
Is Kenmore 11020992991 high end?
Yes. Kenmore model 11020992991 is a Kenmore Elite washer, which is Kenmore’s higher-end line; it was sold with upgraded features and stronger warranty coverage than many standard Kenmore washers. For the best overview of features and operating options, use the owner's manual.
Kenmore Elite typically indicates a step up in performance, cycle options, and build components compared to entry-level top-load washers.
Common “premium” traits you’ll see with Elite washers include:
- More wash and rinse options for different fabric types
- Better load handling and turnover (agitator and drive system design)
- More robust suspension and spin control for larger loads
- Higher parts availability for long-term repairability
- Longer or enhanced warranty terms on key components
Your manual includes extended coverage on major components, which is a strong sign this washer was positioned above basic models.
| Covered component | Coverage type | What it suggests |
|---|---|---|
| Wash basket (white porcelain) | Limited lifetime | Premium tub and basket materials |
| Plastic tub | Limited 10-year | Long-term support for major structure |
A “high-end” washer is usually worth repairing when the failure is in a common wear part (agitator, coupling, drain pump, lid switch) instead of a major drive system. For example, if agitation is weak or intermittent, the agitator dog 80040 is a frequent, low-cost fix on many Kenmore top-load designs.
- Confirm the exact symptom: no spin, no drain, weak agitation, or loud grinding
- Check for off-balance behavior and excessive vibration (suspension wear)
- Look for leaks at the tub and pump area after a fill
- Verify the lid is closing and latching correctly (lid switch issues can stop spin)
- Review cycle and loading guidance in the owner's manual to avoid repeat problems
Last updated: February 2026
What is the cubic feet capacity of a Kenmore washer model 11020992991?
The cubic feet capacity for Kenmore washer model 11020992991 is listed in the specifications section of the 11020992991 owner's manual. This model is a traditional top-load, agitator-style washer; capacity is a fixed spec for the model and is not determined by swapping normal service parts.
Use these model-specific checks so you get the correct number for comparing washers or planning load size:
- Open the 11020992991 owner's manual and look for Specifications, Features, or Washer capacity
- Check the model and serial plate under the lid or around the opening and confirm it matches 11020992991
- If you are estimating for load planning, measure the basket interior (diameter and depth) and calculate volume; use the manual value for the official spec
Even before you look up the exact number, these rules help you load an agitator top-load washer correctly:
| Load type | Practical fill level | What to watch for |
|---|---|---|
| Mixed everyday load | Around 2/3 full, loosely packed | Clothes should circulate around the agitator |
| Towels/jeans | Around 1/2 to 2/3 full | Overloading increases vibration and poor rinsing |
| Bulky items (blankets) | One item or a small set | If it floats and cannot roll over, it is too much |
Using the correct capacity helps prevent overloading, which reduces cleaning performance and can increase out-of-balance shaking, slow spin, and wear on the drive and suspension system.
If the washer seems to “hold less” because it is not turning over the load well, these common wear parts can be involved:
- Worn agitator dogs reduce top agitation and rollover: agitator dog 80040
- A failing motor coupling can weaken agitation and spin: coupling 285753A
- A weak drain pump can leave loads heavy and compacted after drain: washer drain pump WP3363394
Last updated: February 2026
