Craftsman 917275701 lawn tractor Parts

The Craftsman lawn tractor model 917275701 uses a Briggs and Stratton engine (model 445677, type 0413-E1). The tractor owner’s manual lists an oil filter for this engine, but the oil filter part number is best confirmed by matching the engine model and type in the engine parts list in the 917275701 owner's manual.

How to get the exact oil filter part number (fast)

Use the engine identification, not a generic “Craftsman oil filter” listing.

• Locate the engine label on the blower housing or valve cover area.
• Write down Briggs model 445677 and type 0413-E1.
• Open the 917275701 owner's manual and go to the Briggs engine parts pages.
• Look for the line item labeled Filter-Oil (oil filter) in the parts list.
• Use that exact Briggs part number when ordering.
• If your engine has been replaced, match the replacement engine model/type instead.

What we can confirm from the manual

The manual pages for model 917275701 identify the engine family information you need to pull the correct oil filter listing.

Item to match	Where to find it	Example shown for 917275701
Tractor model	Tractor frame tag	917275701
Engine model/type	Engine label and manual engine section	445677 / 0413-E1
Oil filter listing	Briggs parts list line item	Filter-Oil

Why it matters

Oil filters vary by thread size, gasket diameter, and bypass setting. Matching the oil filter to the exact Briggs model and type prevents leaks, low oil pressure, and premature engine wear.

Last updated: February 2026

For Craftsman lawn tractor model 917275701, use 4-cycle detergent engine oil and select the SAE viscosity grade based on the outdoor temperature (the manual includes an oil viscosity chart). Follow the oil level and oil-change steps in the 917275701 owner's manual.

Oil type and viscosity (what to use)

Use standard 4-cycle detergent oil; then match viscosity to the season:

• Warm-weather mowing: SAE 30 is commonly used
• Cooler-weather starting: 10W30 is commonly used
• Cold-weather starting: 5W30 is commonly used
• If you use multi-viscosity oil in warmer temps: check the oil level more often (it can consume oil faster)
• Never mix oil with gasoline (this is a 4-cycle engine)

Quick viscosity guide (typical)

Typical outdoor temperature	Common SAE choice	Best for
Hot to warm conditions	SAE 30	Steady protection in heat
Mild to cool conditions	10W30	Easier starting than SAE 30
Cold conditions	5W30	Best cold starting

Oil level checks and change interval

These habits prevent low-oil operation and extend engine life:

• Check oil with the tractor on level ground
• Fill only to the “FULL” mark on the dipstick; do not overfill
• Check the crankcase oil level before starting and after each 8 hours of operation
• Change oil every 50 hours of operation or at least once a year

Why it matters

Using the right viscosity for the temperature keeps the engine properly lubricated at startup and under load; regular checks and 50-hour oil changes help prevent accelerated wear from running low on oil.

Last updated: February 2026

Craftsman model 917275701 is a specific lawn tractor model number, but the year it was made is not printed in the parts list pages; the build date is typically identified from the tractor’s product ID label (often under the seat or on the frame) and then matched to the manual and engine numbers in the 917275701 owner's manual.

How to find the manufacture year on your tractor

Use these checks on your Craftsman 917275701:

• Look for the product ID label under the seat, on the rear fender pan, or on the frame near the engine.
• Write down the model number (917275701) and any serial number or date code shown.
• Record the engine model and type from the engine tag; many tractors use a Briggs and Stratton engine and the engine tag helps narrow the timeframe.
• Compare the tractor’s configuration (hood, dash, chassis layout) to the illustrated parts breakdown in the manual.
• If the label is missing or unreadable, use the engine numbers plus the tractor’s chassis and control layout to narrow the production period.

What we can confirm from the documentation

The documentation we have is clearly tied to TRACTOR model number 917275701 and includes detailed chassis, engine, seat, decals, and lift assembly breakdowns.

What you have	What it tells you	Where to use it
Tractor model number: 917275701	Identifies the correct parts and diagrams	Parts lookup and manual matching
Tractor serial/date code (from ID label)	Points to the actual build year	Dating the tractor
Engine model/type/code (from engine tag)	Helps narrow the engine’s production date	Cross-checking timeframe

Why it matters

The exact manufacture year affects parts fitment and service details such as belt routing, PTO clutch style, and steering or chassis variations. Confirming the year before ordering helps avoid returns and downtime.

Last updated: February 2026