Kenmore 79573059410 refrigerator Parts

On the Kenmore 79573059410 bottom-mount refrigerator, the “bottom part” is most often called the base cover (also known as the toe grille or kick plate). It’s the panel at floor level that helps protect components and directs airflow for cooling.

What people mean by “the bottom part”

Depending on what you’re pointing to, the name changes:

• Base cover (toe grille/kick plate): Front panel at the very bottom of the cabinet
• Freezer drawer: The bottom compartment on a bottom-mount refrigerator
• Durabase and divider: The internal freezer bin system that supports and separates food storage
• Drain pan: A pan underneath that collects defrost water (not usually visible)
• Condenser area: The lower rear area where heat is released (fan and coils may be nearby)

For diagrams and the exact feature names used for this model, use the 79573059410 owner's manual.

Quick ID guide

What you see	Common name	Where it is
Slotted panel at floor level	Base cover (toe grille)	Front, very bottom
Large pull-out compartment	Freezer drawer	Bottom section
Plastic bin system inside freezer	Durabase and divider	Inside freezer drawer
Water on floor near fridge	Drain system/drain pan issue	Under or behind unit

Why it matters

Using the right name helps you get the right part and the right instructions. For example, the manual warns to keep hands and feet away from the base cover and the bottom of the refrigerator during service because moving parts and electrical components can be nearby.

Related maintenance tip

If you’re removing the base cover to clean or inspect, protect the floor and pull the refrigerator straight out (not side-to-side) to avoid floor damage.

Last updated: January 2026

For Kenmore Elite model 79573059410, the most common problems we see are cooling issues (often tied to airflow or the sealed system), ice maker and dispenser troubles, and control or sensor-related symptoms. Start by checking temperature settings and basic maintenance steps in the 79573059410 owner's manual.

Most common symptoms and what they usually point to

• Not cooling well in fresh food section: restricted airflow, evaporator fan issue, dirty condenser coils, or a defrost problem
• Freezer cold but fridge warm: air duct blockage, fan not running, frost buildup on the evaporator
• Ice maker not making ice: water supply issue, inlet valve problem, ice maker assembly fault
• Water dispenser slow or not dispensing: clogged water filter, low water pressure, inlet valve issue
• Clicking, buzzing, or repeated start attempts: compressor start relay problem or compressor issue

Quick checks we recommend first (before replacing parts)

1. Confirm controls are set correctly (typical targets: 37°F fridge, 0°F freezer).
2. Clean condenser coils; dirty coils commonly cause warm temps and long run times.
3. Make sure doors seal fully and close on their own.
4. If you have a water dispenser, replace the filter on schedule and purge air from the line.
5. If the unit has an error code or unusual display behavior, use the Kenmore 795 model bottom freezer refrigerator error codes guide to narrow the failure.

Parts that commonly solve these problems on this model

Problem area	Common fix	Example part for 79573059410
Water tastes bad or flow is weak	Replace water filter	Genuine Kenmore refrigerator water filter 9690 AGF80300801
Ice maker not filling	Diagnose water inlet valve or ice maker	Lg refrigerator ice maker AEQ73110210
Lights or cooling act “door open”	Replace door switch	Refrigerator door switch 6600JB1010A

Why it matters

Catching airflow, filtration, and door-seal problems early helps prevent temperature swings that spoil food and can reduce strain on major components like the compressor.

Last updated: January 2026

For Kenmore model 79573059410, the model number alone usually does not state the exact cubic-foot capacity. The most reliable way is to check the capacity/specifications section in the 79573059410 owner's manual or on the appliance rating label inside the fresh food compartment.

Fast ways to find the cubic feet

Use these checks in order (they are the quickest and most accurate):

• Owner’s manual: Look for “capacity” or “specifications” in the 79573059410 owner's manual.
• Model tag inside the refrigerator: Open the fresh food door and look along the side wall or ceiling area for the rating label; it often lists total capacity.
• Compare by model family: This refrigerator is in the Kenmore 795.7305* family (shown in the manual); models in the same family typically share similar cabinet size and capacity.
• Measure and estimate (backup method): If labels are missing, you can estimate based on exterior size, but it is less accurate than the label/manual.

Estimating capacity when you cannot find the label

If you need a quick estimate, most Kenmore bottom-mount refrigerators in this style commonly fall in a rough 20 to 25 cu. ft. range. Use this only for planning (moving, kitchen fit, storage expectations), not for ordering parts.

Method	Accuracy	Best for
Rating label inside fridge	Highest	Confirming exact cubic feet
Manual specifications	High	Verifying capacity and features
Measure and estimate	Medium	Rough planning only

Why it matters

Cubic feet helps you compare storage space, but it is not the key identifier for parts. For parts compatibility, we use the full model number (79573059410) and, when needed, the specific component (like a water filter or door gasket).

Related parts that are often confused with “capacity” questions

If the real issue is performance (not space), these parts are common suspects:

• Water taste/flow issues: genuine Kenmore refrigerator water filter 9690 AGF80300801
• Odors: lg refrigerator air filter ADQ73214408
• Warm temps or poor airflow: evaporator fan motor, condenser coils, door gasket

Last updated: January 2026