Kenmore Elite 79572483411 refrigerator Parts

The exact cubic-foot capacity for Kenmore Elite model 79572483411 is listed on the model’s rating label and in the specifications section of the 79572483411 owner's manual. If you need a quick estimate, we calculate cubic feet by measuring the usable interior space (not the outside cabinet size).

• Check the rating label inside the fresh food section (commonly on a side wall near the crisper area).
• Look for wording like “Capacity”, “Total volume”, or “cu. ft.”
• Confirm the number in the specifications pages of the 79572483411 owner's manual.
• If your label is worn, take a photo and zoom in; the capacity is usually printed in a single line.

Use interior measurements in inches, then convert to cubic feet.

• Measure interior width (left wall to right wall)
• Measure interior height (floor to ceiling of the compartment)
• Measure interior depth (back wall to the inside front edge)
• Multiply: width x height x depth = cubic inches
• Divide by 1,728 to convert cubic inches to cubic feet

Outside cabinet dimensions include insulation, door thickness, and non-storage spaces, so they overstate capacity. Interior shelves, bins, and the ice maker also reduce usable space.

If you are checking capacity because storage feels tight due to odors, airflow, or ice buildup, these parts and steps often help:

• Replace the lg refrigerator air filter ADQ73214408 on schedule
• Replace the Kenmore refrigerator water filter 9490 ADQ73613402 if water flow is slow
• Keep vents clear of food packages for proper circulation

Last updated: February 2026

Common problems we see on the Kenmore Elite refrigerator model 79572483411 include warm temperatures from restricted airflow or dirty condenser areas, ice maker and dispenser issues, water leaks from supply or tubing problems, and odor complaints. Your 79572483411 owner's manual also includes a troubleshooting guide and Kenmore Connect steps for faster diagnosis.

• Not cooling or weak cooling: dirty condenser coil, failed evaporator fan motor, sealed-system/compressor issue
• Freezer cold but fridge warm: blocked air vents, evaporator fan problem, frost buildup from a defrost issue
• Ice maker not making ice: water supply restriction, frozen fill tube, failed ice maker module
• Water dispenser slow or not dispensing: clogged water filter, kinked water line, inlet valve issue
• Bad odors: overdue air filter, spills in drawers, food stored uncovered

1. Confirm controls are set correctly and doors close fully.
2. Make sure air vents inside the fresh food section are not blocked by packages.
3. Clean dust from the condenser area (unplug first).
4. If water flow is weak, replace the water filter and flush several gallons.
5. If odors persist, replace the air filter and clean interior surfaces.

Catching airflow restrictions, filter clogs, and early fan problems quickly helps protect food temperatures and reduces strain on the compressor and sealed system.

If your refrigerator is acting up intermittently, follow the Kenmore Connect instructions in the 79572483411 owner's manual to transmit diagnostic data when a specialist asks for it.

Last updated: February 2026

A Kenmore Elite refrigerator like model 79572483411 typically lasts 10 to 15 years. Regular maintenance (keeping airflow clear, cleaning, and replacing consumables like filters) helps it reach the high end of that range and reduces cooling and ice maker problems.

Most refrigerator life is driven by how hard the sealed system and airflow components have to work.

• Maintenance habits: cleaning, proper loading, and prompt leak cleanup
• Airflow and heat: blocked vents or dirty condenser area increases run time
• Door sealing: weak gaskets cause warm air leaks and frost
• Water and ice use: heavy dispenser/ice maker use adds wear to valves and motors
• Power quality: frequent outages or surges can stress the control board

Use this as a simple baseline for a Kenmore Elite bottom-freezer style refrigerator.

For model-specific locations and steps, follow the 79572483411 owner's manual.

If cooling becomes inconsistent, these are the types of parts that often determine whether a repair is simple or more involved.

• Sealed system components (compressor, refrigerant circuit)
• Evaporator fan and airflow parts
• Electronic control board
• Ice maker and dispenser drive components

If odors are a recurring issue, replacing the lg refrigerator air filter ADQ73214408 is a quick, low-risk maintenance step that helps keep the fresh food section from smelling stale.

Once a refrigerator gets past the 10-year mark, small issues (warm temps, frost buildup, slow water dispensing) can cascade into longer run times and higher wear on the compressor and fans. Staying on top of filters, airflow, and door sealing helps your 79572483411 run more efficiently and last longer.

Last updated: February 2026

Your Kenmore Elite refrigerator’s model number is printed on the model and serial number label; on Kenmore Elite model 79572483411, that label is on the inside wall of the refrigerator or freezer compartment, and you should not remove it. See the 79572483411 owner's manual for label and feature-location details.

Check these common label locations on Kenmore Elite refrigerators:

• Inside the fresh food (refrigerator) compartment side wall
• Inside the freezer compartment side wall
• On the inside frame area near the door opening
• Behind the lower crisper drawer area (on some configurations)
• Under the front of the refrigerator (near the tech sheet area)

The label typically includes both a model number and a serial number.

Kenmore Elite refrigerators can share similar styling across multiple model families, but parts and procedures can differ. Using the exact model number helps us match the correct items such as the Kenmore refrigerator water filter 9490 ADQ73613402 or the lg refrigerator ice maker AEQ73110210 when you are troubleshooting or replacing components.

• Copy the model number exactly as printed (include all digits)
• Take a clear photo of the label for reference
• Use the model number to confirm fit before ordering filters, bins, or an ice maker
• If the label is hard to read, gently clean the area with a damp cloth and dry it

Last updated: February 2026

Kenmore Elite refrigerator model 79572483411 is a French door style refrigerator; its exact exterior dimensions (width, depth, height) depend on the specific 795.7248 sub-variant and how the doors and handles are configured. For the precise measurements for your unit, use the dimension and installation clearance details in the 79572483411 owner's manual.

We recommend measuring your refrigerator in place and comparing it to the manual so you know it will fit your opening and allow proper airflow.

• Measure width at the widest point (often the doors, not the cabinet)
• Measure height from floor to top hinge cover (include hinges)
• Measure depth in two ways: cabinet only, and to the front of handles
• Confirm whether you need doors removed to pass through a doorway (the manual covers door removal)
• Leave room for door swing and drawer pull-out

Your Kenmore Elite 79572483411 needs space around it for door opening and ventilation.

Correct sizing prevents poor cooling, higher energy use, and installation headaches (like doors not opening fully or the cabinet overheating from restricted airflow).

If you are reinstalling after moving the refrigerator, these items commonly get checked or replaced:

• Door bins and shelves seated correctly
• Water line not kinked behind the cabinet
• Air filter installed and cover closed
• Leveling so doors self-close and seal

Last updated: February 2026