Kenmore 11062824101 electric dryer Parts

Your Kenmore dryer’s model number is printed on the model and serial number plate; on model 11062824101, that plate is on the dryer cabinet (commonly just inside the door opening) or on the back near the top. Write down both the model and serial numbers for parts and service.

Where to look on Kenmore model 11062824101

Check these common label locations first:

• Inside the dryer door opening on the cabinet frame
• On the back of the dryer cabinet near the top
• Around the door opening area where the door closes (cabinet face)
• If the label is hard to read, use a flashlight and take a close-up photo

What to record (and why)

The manual calls out that you need the complete model and serial numbers when requesting information. Use this quick checklist:

• Model number (example: 11062824101)
• Serial number (unique to your dryer)
• Date of purchase (helpful for your records)

Item	What it tells us	Used for
Model number	Exact dryer design and parts list	Correct parts lookup, diagrams
Serial number	Production details for your unit	Service history, version differences
Date of purchase	Age of the appliance	Maintenance planning

If the label is missing or unreadable

Use these practical workarounds:

• Look for a second sticker on the rear panel near the power cord entry
• Check any paperwork you kept and compare it to the 11062824101 owner’s manual
• If you are ordering common wear items, match by model first, then confirm by symptom (for example, a broken belt often points to the dryer drum belt 341241)

Why it matters

Kenmore dryers can look similar across many series, but parts like the heating element, door switch, and timer can vary by model. Using the exact model number prevents wrong-part returns and speeds up troubleshooting.

Last updated: February 2026

Replacing drum bearings on a Kenmore electric dryer like model 11062824101 typically costs $200 to $500 total (parts plus labor). If the repair requires major teardown or additional worn drum-support parts, the total commonly rises to $500 to $900.

What you’re paying for

Drum bearing work is labor-heavy because the cabinet and drum usually have to come apart. Costs typically include:

• Service call or diagnostic fee
• Labor time to access the drum support
• Drum bearing(s) and related hardware
• Optional “while you’re in there” wear parts (belt, idler, blower wheel)
• Venting cleanup if overheating or lint buildup contributed to the failure

Typical cost ranges (parts + labor)

Repair scenario	Typical total cost	Notes
Single rear drum bearing replacement	$200 to $500	Most common when noise is from the rear support
Bearing plus additional drum support parts	$500 to $900	Often needed if the shaft, housing, or supports are worn
DIY parts-only (if you do the labor)	$30 to $200+	Varies widely by design and what’s worn

Signs the drum bearings are the problem

These symptoms often point to drum bearing wear (not a heating or timer issue):

• Loud squeal, grinding, or rumbling as the drum turns
• Noise gets worse as the dryer warms up
• Drum feels rough or has side-to-side play when turned by hand
• Burning smell caused by friction (stop using the dryer and inspect)

Smart add-ons while the dryer is open

If your 11062824101 is already torn down, replacing common wear items can prevent a second teardown:

• Dryer repair kit 4392065 (often includes multiple drum-support wear components)
• Dryer drum belt 341241 if the belt is glazed, cracked, or stretched
• Idler pulley WP691366 if it squeals or wobbles
• Dryer blower wheel WP694089 if it’s loose, cracked, or rubbing

Why it matters

Worn drum bearings can damage the drum support, belt, and motor over time. Fixing the bearing early usually reduces labor time and prevents secondary failures.

For model-specific disassembly guidance and safety steps, follow the 11062824101 owner's manual.

Last updated: February 2026

A Kenmore electric dryer like model 11062824101 typically lasts 13 years with normal household use. Regular vent cleaning, lint removal, and replacing wear items (belt, rollers, idler) on time are the biggest factors in reaching that lifespan.

What affects lifespan the most

• Airflow and venting: Restricted exhaust makes the heater and thermostats run hotter and longer.
• Lint buildup: Lint inside the cabinet and vent increases heat stress and wear.
• Drum support wear: Rollers, shafts, and idler pulleys wear and can strain the motor.
• Overloading: Heavy loads stretch the belt and accelerate bearing and roller wear.
• Electrical health: Loose connections and heat cycling shorten component life.

Maintenance schedule we recommend

The owner's manual calls out periodic lint removal; following a simple schedule helps the dryer run cooler and longer.

Task	How often	Why it matters
Clean lint screen	Every load	Maintains airflow and drying performance
Clean exhaust vent run	Every 1 to 2 years	Reduces overheating and long dry times
Remove lint inside cabinet (qualified service)	About every 2 years	Prevents heat buildup around electrical parts
Check drum support noise (thumps/squeals)	As needed	Catches roller/idler wear before bigger damage

Parts that commonly wear out first on this model

If you are hearing squealing, thumping, or the drum stops turning, these are the most common wear items to check:

• Dryer drum belt 341241
• Idler pulley WP691366
• Dryer blower wheel WP694089
• Dryer repair kit 4392065 (often used when multiple drum-support parts are worn)

Why it matters

A dryer that maintains strong airflow dries faster and runs at safer temperatures; that reduces stress on the heating element, thermostats, and motor, which directly supports a full service life.

Last updated: March 2026